• Korean Journal of Mathematics
• /
• 제19권4호
• /
• pp.351-365
• /
• 2011

In the present paper we introduce a new subclass of analytic functions in the unit disc defined by convolution $(f_{\mu})^{(-1)}*f(z)$; where $$f_{\mu}=(1-{\mu})z_2F_1(a,b;c;z)+{\mu}z(z_2F_1(a,b;c;z))^{\prime}$$. Several interesting properties of the class and integral preserving properties of the subclasses are also considered.

• 대한화학회지
• /
• 제12권2호
• /
• pp.65-80
• /
• 1968

9種의 選擇된 탈리움硼硅酸유리와 21種의 同類組成을 變化시킨 유리에 對하여 物理化學的 性質을 檢討하였다. 이들 組成에 依한 性質의 變化曲線은 여러 點에서 酸化리티움, 소다 및 酸化鉛들을 包含하는 다른 硼硅酸유리와 類似하였다. 탈리움 硼硅酸유리의 組成에 따른 成質의 變化曲線에 極少點이 나타났는데, 이는 $Na_2O-B_2O_3-SiO_2$유리에서 關察된 바와 같이 硼素結合의 變化에 基因되는 것 같다. 탈리움 이온이 硼硅酸유리에 미치는 主 影響을 綜合해 보면 다음과 같다. 1) 탈리움 이온을 添加함으로써 密度, 屈折率, 물에 對한 溶解度, 熱線膨脹係數, 誘電恒數 等이 增加되었다. 2) 탈리움 濃度을 增加시킴으로써 유리의 軟化點이 降下되었고, 紫外線 照射에 依하여 螢光이 생겼으며, 赤外線 $15{\mu}$까지의 吸收端이 不明確해 졌다. $Tl_2O-B_2O_3-SiO_2$ 系에서 廣範한 液體不混合性이 電子顯微鏡에 依해 밝혀졌다. 不混合性은 $B_2O_3-SiO_2$ 二成分系에 對하여 約 $Tl_2O$ 55wt.%의 組成範圍內에서 나타났다. 不混合性유리는 多硅酸과 多硅素相으로 分離 構成되어 있음이 酸處理에 依하여 밝혀졌다.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.731-736
• /
• 2015

Rhodamine B (RhB) was utilized as a dye sensitizer for dye-sensitized solar cells (DSSCs) and its photovoltaic property was examined under the illumination of AM 1.5 G, $100mWcm^{-2}$. DSSCs based on RhB exhibited typical photovoltaic properties with an open-circuit voltage ($V_{OC}$) of 0.34 V, a short-circuit current ($J_{SC}$) of $1.55mA{\cdot}cm^{-2}$, a fill factor (FF) of 50%, and a conversion efficiency (PCE) of 0.26%. In order to further improve the photovoltaic properties of RhB-based DSSCs, the effect of (i) incorporating a strong electron-donating NCS unit into the RhB molecular backbone, (ii) combining a bis-negatively charged zinc complex anion ($Zn-dmit_2$, dmit=di-mercapto-dithiol-thione) with the amine cation of RhB, (iii) co-adsorbing RhB dyes with chenodeoxycholic acid (CDCA) molecules onto porous $TiO_2$ electrodes, was investigated and discussed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권10호
• /
• pp.562-570
• /
• 1999

In the industrial motor drive system which is composed of a motor and load connected with a flexible shaft, a torsional vibration is often generated because of the elastic elements in torque transmission. This vibration, which is generated in a two-mass mechanical system. To solve this problem, recently there has been a lot of researches for the robust control relevant to the $H_{\infty}$ control suppressing the torsional vibration and rejecting the torque disturbance. In the case of the $H_{\infty}$controller, however, the command tracking property becomes worse because of overshoot during transient response. For this reason the $H_{\infty}$ controller, which includes the two-degrees-of-freedom(TDOF) controller, is designed in order to improve command tracking property. However, it also includes complexity realizing this controller. In this paper, a new $H_{\infty}$ controller with partial state feedback is proposed. Proposed $H_{\infty}$controller has simple structure but satisfies with the fast command tracking property and the attenuation of disturbances and vibrations simultaneously, just like the complicated TDOF $H_{\infty}$ controller.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.33-38
• /
• 2003

Highly homogeneous PZT powder was prepared by a partial oxalate method using chemicals of (Z $r_{0.53}$ $Ti_{0.47}$) $O_2$, Pb(N $o_3$)$_2$and (COOH)$_2$ㆍ2$H_2O$. N $b_2$ $O_{5}$ addition effect on microstructure and electrical properties of PZT ceramics was investigated. When the precursors were calcined at 71$0^{\circ}C$, a single perovskite phase was obtained. After sintering at 110$0^{\circ}C$, X-ray diffraction Patterns showed coexistence of rhombohedral and tetragonal phases regardless of the N $b_2$ $O_{5}$ content. As the content of N $b_2$ $O_{5}$ increased, grain size decreased but sintered density increased. The electromechanical coupling factor of kp and the piezoelectric constant of $d_{31}$ increased linearly with the content of N $b_2$ $O_{5}$, and those values reached 0.7 and -200, respectively, when 1.2 mol% of N $b_2$ $O_{5}$ is added. is added.ded.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.781-783
• /
• 2000

1bit full adder have 3 input (including carry_in) and 2 outputs(Sum and Carry_out). Because of 1 bit full adder's propagation delay. We usually use 4-bit binary full adder with fast carry, 74LS283. The 74LS283 is positive logic circuit chip. But the logic function of binary adder is symmetrical, so it can be possible to use it not only positive logic but also the negative logic. This thesis use symmetrical property. such as $C_{i+1}(\bar{a_i}\bar{b_i}\bar{c_i})=C_{i+1}{\bar}(a_i,\;b_i,\;c_i)$ and $S_i(\bar{a_i}\bar{b_i}\bar{c_i})=\bar{S_i}(a_i,\;b_i,\;c_i)$. And prove this property with logic operation. Using these property, the 74LS283 adder is possile as the negation logic circuit. It's very useful to use the chip in negative logic. because many system chip is negative logic circuit. for example when we have negative logic chip with 74LS283. we don't need any not gate for 74LS283 input, and just use output of adder(74LS283) as the negation of original output.

• 한국수산과학회지
• /
• 제31권5호
• /
• pp.609-621
• /
• 1998

1. 연구지역내 sand ridge들은 10$\~$20 m 높이의 비대칭형태이며, 등수심선과 평행하게 발달해 있고, sand ridge의 경사진 부분에서는 지역에 따라 sand wave 형태의 이미지가 나타나는 것으로 보아 현재 다소 활동성이 있는 것으로 보인다. 2. Ridge 주변 위치별 입도, 물리적 성질, 음파전달속도 값은 차이가 크지 않았는데, 이것은 본 연구지역의 주 퇴적상인 사질의 퇴적층이 판의 형태로 넓게 분포하고 있기 때문이다. 3. 코어 하부에는 해수면이 상승하면서 생성된 transgressive sand sheet 퇴적상의 특징을 지시하는 40$\~$200cm 두께의 자갈, 패각편, 조립사가 혼재된 퇴적상이 나타난다. 이들 사질의 분급이 양호하지 않은 이유는 해수면이 상승하면서 조류나 고에너지 환경에서 재동(reworking)되어 퇴적된 palimpsest와 관련된 것으로 사료된다.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제25권2호
• /
• pp.127-133
• /
• 2018

We look at Toeplitz arrays on ${\mathbb{Z}}^d$ and study a characterizing property for pure discrete spectrum in terms of the periodic structures of the Toeplitz arrays.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.979-986
• /
• 2001

This paper was researched the effect of slurry stability on the mechanical and electrical property of the porcelain insulator with various raw materials such as feldspar, quartz, clay and l7wt% alumina. The slurry was fabricated after ball milling the mixed raw materials. Green compacts were made by the extrusion and were sintered at 1300$\^{C}$ for 60min in the tunnel kiln. All of the specimens were densified 96% of the theoretical density. The 3-point flexural strength($\sigma$$\_$B/) of the specimen stabilized slurry pH 7.8 was 1650 k9/㎠ and the vickers hardness(Hv) and the fracture toughness(K$\_$IC/) were 27.5 GPa and 2.2 MPa$.$m$\^$$\sfrac{1}{2}$/, respectively. The mechanical properties of the specimen stabilized slurry PH 9.3 were 1716 kg/㎠($\sigma$$\_$B/), 27.6 GPa(Hv) and 3.0 MPa$.$m$\^$$\sfrac{1}{2}$/(K$\_$IC/), respectively. The dielectric strength was increased from 8.3kV/mm to 13.2kV/mm as the increase of the slurry pH from 7.8 to 9.3. Therefore the physical properties of the specimen stabilized slurry pH 9.3 were improved.

• 공업화학
• /
• 제33권4호
• /
• pp.381-385
• /
• 2022

유해화학물질의 감지 센서 개발을 위해 기재 필름과 전도성 페이스트의 접착 내구성 확보가 매우 중요하다. 본 연구에서는 폴리에틸렌테레프탈레이트(polyethylene terephthalate, PET) 필름에 폴리아닐린/그래핀나노플레이트(graphene nano plate, GNP) 페이스트를 코팅하여 접착 특성을 평가한 결과 cross cut 0B 또는 1B 등급으로 센서 적용에 문제가 있어 에스테르계 바인더를 이용하여 접착 특성 개선 연구를 수행하였다. 에스테르계 바인더가 10 wt% 이상 첨가되면 센서 적용이 가능한 cross cut 등급이 3B 이상을 나타내었다. 바인더의 과량 첨가는 전도성 페이스트의 전기적 특성에 영향을 줄 수 있으며 실제로 황산에 대한 반응성이 감소함을 확인하였다. 전기적 특성 개선을 위해 카본블랙(carbon black, CB) 함량 변화 시험을 수행하였고 CB 2 wt%에서 최적의 전기적 특성을 보임을 확인하였다.