• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1085-1091
• /
• 2006

The major goal of this paper is to develop a practically implemental radial basis function (RBF) neural network based multi-user detector (MUD) for direct sequence (DS)-CDMA system. This work is expected to provide an efficient solution for RBF based MUD by quickly setting up the proper number of RBF centers and their locations required in training. The basic idea in this research is to estimate all the possible RBF centers by using supervised ${\kappa-means$ clustering technique, and select the only centers which locate near seemingly decision boundary between centers, and reduce further by grouping the some of centers adjacent each other. Therefore, it reduces the computational burden for finding the proper number of RBF centers and their locations in the existing RBF based MUD, and ultimately, make its implementation practical.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.3
• /
• pp.159-170
• /
• 1999

Recently Ni/MH secondary battery have been studied very extensively because of containing no pollutants as well as superior performance. However comparing to widely studying high capacity of hydrogen storage alloys electrode, the capacity of Ni electrode is inferior. Using for high capacity Ni/MH battery as a anodic materials, the study about high capacity Ni electrode is necessary. To making high capacity Ni electrode, active materials were impregnated in various polarization impregnation conditions. Plaque, milling for 6hr and sintered at $800^{\circ}C$, indicated porosity over 80%, and porosity were increased with proper condition electrochemical etching treatment. Proper impregnation condition was 40~80mA/cm, polarizing time was 5~10min.

• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.215-218
• /
• 2014

One-dimensional (1-D) microlens parallaxes can be combined with heliocentric lens-source relative proper motion measurements to derive the lens mass and distance, as suggested by Ghosh et al. (2004). Here I present the first mathematical anlysis of this procedure, which I show can be represented as a quadratic equation. Hence, it is formally subject to a two-fold degeneracy. I show that this degeneracy can be broken in many cases using the relatively crude 2-D parallax information that is often available for microlensing events. I also develop an explicit formula for the region of parameter space where it is more difficult to break this degeneracy. Although no mass/distance measurements have yet been made using this technique, it is likely to become quite common over the next decade.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.47-50
• /
• 2004

It is very important that the analysis of postbuckling characteristics for stiffened composite structure. Damage tolerance design concept has been imported in many aerospace structures design to increase the structural efficiency and material failure is an inevitable process in postbuckling behavior. These design concepts are very efficient but consume very much calculation time in analytical process. The proper analysis method for reducing calculation time was researched and the total analysis time was reduced. A selection of proper element, the large load increments in linear response region, and the termination of analysis for unnecessary region were imported in the analysis and about $70\%$ time reduction was achieved with keeping a high accuracy of results.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.771-778
• /
• 2008

The natural dyeing of cotton fabric with Perilla frutescens var. acuta extract was investigated. The proper extraction temperature and time were $100^{\circ}C$ and 120 minutes. The proper temperature, time and colorant powder concentration for the dyeing of cotton fabric with Perilla frutescens var. acuta powder were $90^{\circ}C$, 60 minutes and 15%(o.w.b.), respectively. In various mordanted methods, the K/S values of simultaneous-mordanted methods were higher than those of pre-and post-mordanted methods. And the Cu-and Fe mordant showed higher K/S values than those of other mordants. Light colorfasness of mordanted cotton fabric was poor, but the other colorfasnesses were shown to be good. The cotton fabric mordanted with Cu mordant was showed effective bacterial reduction.

• 한국가시화정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.97-100
• /
• 2007

A new evaluation method for the performance tests of the frozen air in a refrigerator using PIV(Particle Imaging Velocimetry) and POD(Proper Orthogonal Decomposition) techniques is introduced. A two-door refrigerator model was tested for the experiments. Actual temperature measurements were carried out for the drawer No.4 in refrigerator. By evaluating the characteristics of the interior flow of the refrigerator, an optimal shape of the drawer could be suggested through the PIV evaluation test. In this research, in order to find influences the turbulent kinetic energy contribution associated with the dynamic structures, we executed a POD analysis using the method of snapshots and the instantaneous fluctuating velocity field.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.84-93
• /
• 1996

This paper describes the development of new feature positioning method which embedded into the top-down assembly modeling system supporting conceptual design. In this work, the user provides the geometric constraints representing the position and size of features, then the system calculates their proper solution. The use of geometric constraints which are easy to understand intuitively enables the user to represent his design intents about geometric shapes, and enables the system to propagate the changes automatically when some editing occurs. To find the proper solution of given constraints, the Selective Solving Method in which the redundant or conflict equations are detected and discarded is devised. The validity of feature shapes satisfying the constraints can be maintained by this technique, and under or over constrained user-defined constraints can also be estimated. The problems such as getting the initial guess, controlling the multiple solutions, and dealing with objects of rotational symmetry are also resolved. Through this work, the feature based modeling system can support more general and convenient modeling method, and keeps the model being valid during modifying models.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.05a
• /
• pp.30-35
• /
• 1999

Recently, many companies want to accept and operate ERP(Enterprise Resource Planning) system in their fields ERP does not only include business, but also include finance, account, trade, personnel and BPR(Business Process Reengineering). Especially, it is necessary to have ERP system for companies which have lots of external businesses such as trade and communication sector. In modern society, the manufacture field faces on variable chances of Environment. For this situation, the application of Information technique is one of the main point maintain competitive power. The company should chose a proper method for their future and build Unified Information System on its suitable situation. Nowadays, Adjustment and application of technical method for Internet/Intranet and raised and more advanced Extranet gains its force at the moment. The Unification of ERP and POP system under the distributed environment like this will have a huge influence to us. In this subject, I will think about POP system for operating EPR system and improve its defects that can operate more effective sales, circulation, demand plan. Also, I suggest a proper POP system can handle seperated resources in each part of factory for a plan of shot period, order operating, factory inventory, process control.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.296-300
• /
• 2001

In order to recycle the incineration ash (bottom ash and fly ash) generated from the incineration of municipal waste for a cement material, salts as well as heavy metal should be removed by the stabilization treatment. Most of these heavy metal and over 80% of salts are removed by a washing as a pre-treatment. However, wastewater which is another pollutant is generated by a washing, then proper treatment should be developed. First the characteristics of incineration ashes collected from two domestic full-sized incinerators were investigated and removal rate of salts and heavy metals from them also studied. The wastewater quality was compared to the criteria of the regulation by analyzing the characteristics of generated wastewater during the washing of incineration ash as a condition of liquid/solid ratio. Also, we tried to used this experimental results for the basic data to develop proper processing technique of municipal waste.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.13 no.2
• /
• pp.141-159
• /
• 2009

In this article, we consider a weighted CVT-based reduced-order modelling for Burgers equation. Brief review of the CVT (centroidal Voronoi tessellation) approaches to reduced-order bases are provided. In CVT-reduced order modelling, we start with a snapshot set just as is done in a POD (Proper Orthogonal Decomposition)-based setting. So far, the CVT was researched with uniform density ($\rho$(y) = 1) to determine the basis elements for the approximatin subspaces. Here, we shall investigate the technique of CVT with nonuniform density as a procedure to determine the basis elements for the approximating subspaces. Some numerical experiments including comparison of two CVT (CVT-uniform and CVT-nonuniform)-based algorithm with numerical results obtained from FEM(finite element method) and POD-based algorithm are reported.