• 대한산업공학회지
• /
• 제14권2호
• /
• pp.131-141
• /
• 1988

As flexible manufacturing technology has become available across a broad range of applications, an increasingly large number of firms have confronted decisions about when to adopt the FMS technology and the size of FMS at that time. For small to medium size firms that should invest under budget limitation and high investment risk, proper size of FMS adoption at proper time is very important. In this paper the discrete optimal control theory has been used to make decisions about the size and timing of FMS capacity expansion over a planning period. Sensitivity analysis is presented for analysing the behavior of the model to variations of model parameters.

• 복식문화연구
• /
• 제5권2호
• /
• pp.253-267
• /
• 1997

In this study, the comfortable as well as good-looking overall patterns were investigated. For proposing the proper ease of the overall, 9 types of experimental overall, that had the ease of different size and position, were made. The appearance of experimental overall No. 5, that had total 10.5㎝ ease in the back, was better than the others. The position of ease affected the appearance of overall. Experimental overall No. 9, that had total 12.5㎝ ease in the back, was better than any others in comfort. The position of ease was not important in comfort. From these results, it was proposed that the proper ease size increased the both comfort and appearance. The paper ease sizes, to gain the comfort and good-looking overalls pattern, were 3.5㎝ in the center-back waist and 2㎝ in the end of crotch to the outside.

• 한국정보처리학회논문지
• /
• 제4권8호
• /
• pp.2106-2119
• /
• 1997

초고속 통신망 구축일 활발해지면서 기존의 근거리통신망(Local Area Network)을 초고속 통신망에 접속하는 장치의 개발에 대한 필요성이 증가하고 있다. 이러한 중간 접속장치는 Ethernet, FDDI 등에서 발생하는 패킷을 처리할 수 있어야 할 뿐만 아니라, 점차 그 수요가 증가하고 있는 멀티미디어 데이터를 효과적으로 수용할 수 있도록 설계되어야 한다. 본 논문에서는 이러한 기능을 수행하는 중간 접속장치로써 NDAS(Network Data Access System)를 제안하고자 한다. 이를 위하여 NDAS 시스템의 기능 및 하드웨어 구조 등을 제시하고, 멀티미디어 데이터 트래픽 특성인 Burstiness를 수용할 수 있는 버퍼 용량을 시뮬레이션을 통해 제시하였다.

• 한국해안해양공학회지
• /
• 제14권1호
• /
• pp.86-93
• /
• 2002

항만부진등 해석에 사용되는 유한요소의 적정 크기를 검토하기 위해 완전개방 직사각형 항만에 대해서 다양한 크기의 요소를 사용한 수치실험을 실시하였다. 수치실험 결과, 공진주기와 증폭비의 허용 오차율을 모두 2%로 하는 경우 파장당 9개, 1%로 하는 경우 12개의 요소가 필요한 것으로 나타났다. 또한, 요소 수의 증가에 따라 공진주기의 오차율은 선형적으로, 증폭비의 오차는 진동하면서 감소하였으며, 요소 수를 9개보다 적게 하는 경우 증폭비의 오차가 상대적으로 크게 증가하였다

• 한국생활과학회지
• /
• 제12권4호
• /
• pp.553-558
• /
• 2003

The purpose of this paper was to design the sizing system of the head gears which would be a guide of men for selecting their head gears of suitable size. This study was carried out on 214 men and was done by cluster analysis with two variables(head circumference and bitragus to vertex arc length). The results were as follows : First, most of measurements were larger in men than in women. Second, the suitable numbers of size were found that 5 sizes were proper by cluster analysis with two variables. After the design of sizing system, the cover ratio was investigated in order to decide whether it is proper or not. Third, in the cover ratio, the 5 sizes were the highest in all of them.

• 교육시설
• /
• 제17권2호
• /
• pp.13-22
• /
• 2010

This paper studies the program to estimate simultaneously the proper size and the number of lecture rooms by sizes in university when the curriculum has been fixed and the number of students present at a lecture class can be predicted. Proposed gradual forms can be applied according to several variables like basis size of lecture rooms, structural modules of the building and ratio of occupation of lecture rooms etc. The validity of proposed method is verified through the application of real case.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.844-852
• /
• 2017

Since guided weapon is high-cost and one-shot device which is non-reusable, it requires a lot of resources to prove required accuracy as a part of reliability demonstration. Once a test for proving accuracy rate of guided missile fails, it causes an additional cost and delay of schedule. This study introduces an equation for proper sample size and plan for guided-missile accuracy rate test in order to minimize the risk of test failure. Proper sample size for the test is derived by considering the reliability growth. Furthermore, each task for accuracy rate test is defined according to the development step. Therefore, this study can contribute to reduce sample size for accuracy rate test in order to meet the reliability requirement and assure transparency in the test process.

• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1344-1348
• /
• 2005

Moxibustion treatment gives stimulus to specific points in the meridian distributed on the body, and controls imbalance of Qi, blood stream, and, Yin and Yang. So this treatment is the way that prevents and cures diseases by making meridian flow normal. Moxibustion stimulating conditions have a great influence on the treatment results. So proper standards of stimulus are needed to expect effective treatment results. To know what number of moxibustions are needed to gain good treatment effects, I observed the gastrin level in blood after moxibustion on the Xiawan(CV10). Gastrin stimulates to secrete gastric acid. The followings are the results. After 1, 5, and 10 moxibustions everyday on each rat for 5 days, 1 compared what number of moxibustion had a good effect. The group of 5 moxibustions every day had a more significant effect. After moxibustions of 1, 5, and 10 coagulated moxas on each rat, 1 compared the effect of the size of coagulated moxa. The group of 5 and 10 coagulated moxas had a more significant effect. After the same moxibustions on each ract for 1, 5, and 10 days, 1 compared the effect of moxibustion terms. The group of 5 days moxibustion had a more significant effect. These results say that the treatment effect of moxibustion can be varied by the choice of points, and the size, the time, and the number of moxibustions can bring out different effects. I think that the proper size, the proper time, and the proper number of moxibustions can be more effective than the excessive moxibustions.

• 선박안전
• /
• 통권22호
• /
• pp.54-64
• /
• 2007

This study is about the size and the number of toilets in the passenger ships. National regulations and other countries regulations were searched and analyzed. The toilets in the passenger ship, that are engaged in Busan City, Inchen City and Mokpo City were also searched and these present situation of the toilets were used with basic data of this study. Finally, we give a suggestion on the size and the number of toilets in the passenger ship.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.129-135
• /
• 2005

At present, fatigue design of welded structures is primarily based on a nominal stress or hot spot stress approach with a series of classified weld S-N curves. Although well accepted by major industries, the nominal stress based fatigue design approach is cumbersome in terms of securing a series of S-N curves corresponding to each class of joint types and loading modes. The hot spot stress based fatigue design has a difficulty of finding a proper stress through the global model, the midium size model, and the detail model of ship structure. Also, it is difficult to link proper displacements within three different mesh size models. Recently, the structural stress is proposed as a mesh-size insensitive structural stress definition that gives a stress state at weld toe with relatively large mesh size. However, this method requires an experimental validation in obtaining the fatigue strength of weldments. Therefore, in this study, a series of experiment is performed for various sizes of weldments.