• 한국농공학회지
• /
• 제31권4호
• /
• pp.58-71
• /
• 1989

This study aims to develop a computerized program for analysis of the ground-supported cylindrical shell structure with step varied section and to find out its mechanical characteri- stics through application of the developed program to the analysis of a ensiled farm silo as a model structure. The thickness of wall and bottom-plate of farm silo is assumed to be step-varied and its detailed structural dimensions are presented in Tab. 1 and 2. Several numerical case studies show that sectional stresses of the sample structures are largely reduced by adopting "varied section" design technique. And, other major results ob- tained from this study are summarize4 as follows ; 1. The variation of wall-thickness has a great influence on bending stresses of wall. Ho- wever, the larger the relative thickness of bottom-plate is, the smaller the influence is. 2. The magnitude of thickness of projecting toe of bottom-plate has negligible effect on sectional stresses 3. The conventional design methodology, which assumes the bottom edge of wall as clam- ped on ground, is proved to be discarded through the numerical analysis. 4. It is found that the "varied section" design technique should get similar effects as in the case of thick bott6m-plate having uniform thickness. 5. The variation of wall-thickness has a considerable effect on the bending stresses of bo- ttom-plate. Especially, this phenomenon is very remarkable in its projecting toe. In some cases. the negative bending moment may be acted on.

• 대한전자공학회논문지SP
• /
• 제42권4호
• /
• pp.87-94
• /
• 2005

3차원 영상 모자이크 방법은 도심지의 도로를 따라 움직이는 카메라로부터 취득된 영상을 3차원 다중 투영평면에 투영하여 도심지를 입체적으로 가시화하기 위한 것이다. 카메라가 교차로와 같은 원거리 가시 지점을 통과할 때, 취득된 영상에 대해 3차원 영상 모자이크 방법을 적용 하면, 모자이크 된 영상에서 동일한 대상물의 영상이 반복하여 나타난다. 이 현상을 환영현상(ghost effect)이라고 하는데, 이 환영현상을 줄이기 위해서 원거리 대상물이 있는 곳의 영상 프레임을 찾고, 이 곳에 나타나는 환영현상을 효과적으로 제거하는 알고리즘을 제안하였다. 제안한 알고리즘은 3차원 공간에서 계산된 가상의 초점과 영상 프레임의 초점을 지나는 벡터를 이용하여 영상 프레임들을 3차원 다중평면에 투영 하는 것이다. 이를 위한 가상 초점은 원거리 대상물이 보이기 시작하는 영상 프레임과 원거리 대상물이 사라지기 시작하는 영상 프레임을 이용하여 계산된다. 본 논문에서는 원거리 대상물 지역에 제안한 방법을 적용했을 때, 환영현상이 효과적으로 제거될 수 있음을 실험적으로 보였다

• 한국실내디자인학회논문집
• /
• 제25권6호
• /
• pp.70-78
• /
• 2016

This paper aims to describe a case study of parametric interior design based on BIM (Building Information Modeling). As the practical use of BIM-based design grows, its influence expands into the field of interior architecture design. BIM makes possible to check various design plan, reach decision making in an effective way, and change design plan in an efficient method. Therefore, BIM is also promising field in interior architecture design. However, compared to other fields in architecture, engineering, and construction (AEC) industry, there have been less research and projects on BIM in the field of interior architecture. For increasing the feasibility of adapting BIM in interior architecture design, this paper describes a case study-projecting images for designing interior panels using parametric modeling. This process needs elaborate, delicate, and precise steps for harmonious output. For continuous use of building, users look forward to the design which variable and changeable according to user's preference and environment. Therefore, demand for parametric design in the interior design part such as panel pattern design for various decoration is growing. Treated process in this paper deals with an advanced phase which much effective in decreasing time consumption and useless part of process. Finally, this paper suggests the possibility of using BIM in the interior design process and field where BIM can be applied.

• 한국주거학회논문집
• /
• 제18권1호
• /
• pp.113-122
• /
• 2007

Houses in Jeju city are divided into separated types and combination types of household affairs space. Other special types are separated-kitchen type. Separated household affairs space type is mostly built. Separated household affairs space type were sitting room + Gopang separate type and separate sitting room type. Combination household affairs space type made from sitting room, kitchen, Gopang and Chabang(Dinning room) put together as space differentiation, also into classes sitting room + kitchen + Gopang + Chabang type, sitting room + kitchen + Chabang type, sitting room + kitchen + Gopang, sitting room + kitchen type by combination household cares space type. Separated-kitchen type was one of the special type from separated-kitchen type of traditional housing, and type with continuous. Houses in Jeju city were 3 kan type and 4 kan type. 4kan type was mostly built. ㅡ shape is kept as plan shaped of straight shape, and roof shape is showed as ㅡ shape gathering roof. ㅡ shape + part projection type talls part projecting type as happened in Gopang, and Chabang. Roof is gathering roof, and when it is showed ㄱ shape by Gopang, Chabang, and kitchen are projected. ㅡ shape + total projection shape is one of the room become totally projected by Gopang and Chabang, can be happen with small room or kitchen, and roof as gathering roof shaped with ㅡ shape, ㄱ shape, ㄷ shape, unsystematic ㄹ shape, and various shapes.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.29-42
• /
• 1992

자유표면하에 잠긴 복잡한 3차원 물체 주위의 흐름을 해소하기 위한 수치계산법이 TUMMAC(Tokyo Univ. Modified Marker And Cell)법을 기초로 하여 개발되었다. 임의물체의 no-slip 3차원 물체표면조건을 보다 간단히 처리하기 위하여 "porosity"라는 개념이 도입되었으며, 담수성에 잠겨 있는 해저돌출물 주위의 유동을 계산하여 그 응용성을 검토하였다. 돌출물 후방의 복잡한 와동들의 상호간섭이 잘 시뮬레이션 되었다.시뮬레이션 되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.30-37
• /
• 2001

A Numerical simulation for the propulsion of axisymmetric body by contractive and dilative motion is carried out. The present analysis shows that a propulsive force can be obtained in highly viscous fluid by a contractive and dilative motion of axisymmetric body. An axisymmetric analysis code is developed with unstructured grid system for the simulation of complicated motion and geometry. The developed code is validated by comparing with the results of stokes approximation with the problem of uniform flow past a sphere in low Reynolds number($R_n=1$). The validated code is applied to the simulation of contractive and dilative motion of body. The simulation is extended to the analysis of waving surface with projecting part for finding out the difference of hydrodynamic performance according to the variation of waving surface configuration. The present study will be the basic research for the development of the propulsor of an axisymmetric micro-hydro-machine.

• 기술사
• /
• 제27권3호
• /
• pp.121-131
• /
• 1994

3차원 자유 형상 곡면으로 이루어진 선형을 부분적으로 표현하기란 매우 힘들다. 선박 설계에 컴퓨터를 이용한 기술이 적용되기 시작하면서, 기하학적 모델링 기법이 개발되어 왔다. 선형 모델링에서,곡률 변화가 심한 선체 곡면의 국부적인 곡면 형상을 Blending 기법을 써서 표현하는 연구는 이루어지지 않았다. Blend곡면을 써서, 설계시에 도면상에 표시되는 작은 곡면을 부드럽게 표현하는 방법을, 선체표면과 돌출된 접합 부분을 Blending 하고져 하였다. 본 연구에서는, 두개의 Base곡면에 Blend반지름을 입력 했을 때, Blend곡면에 Blending방법을 이용하여 공간 좌표인 Offsets 데이터를 얻을 수 있도록 선박 설계에 적용하여 보았다.

• Journal of Ship and Ocean Technology
• /
• 제3권1호
• /
• pp.1-11
• /
• 1999

Numerical simulation for the axisymmetric body with contractive and dilative periodic motion is carried out. The present analysis shows that a propulsive force can be obtained in highly viscous fluid by the contractive and dilative motion of axisymmetric body. An axisymmetric code is developed with unstructured grid system for the simulation of complicated motion and geometry. It is validated by comparing with the results of Stokes approximation with the problem of uniform flow past a sphere in low Reynolds number($R_n$ = 1). The validated code is applied to the simulation of contractive and dilative periodic motion of body whose results are quantitatively compared with the two dimensional case. The simulation is extended to the analysis of waving surface with projecting part for finding out the difference of hydrodynamics performance according to variation of waving surface configuration. The present study will be the basic research for the development of the propulsor of an axisymmetric micro-hydro-machine.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.2327-2347
• /
• 2018

Human actions can be recognized from depth sequences. In the proposed algorithm, we initially construct depth, motion maps (DMM) by projecting each depth frame onto three orthogonal Cartesian planes and add the motion energy for each view. The body part of the action (BPoA) is calculated by using bounding box with an optimal window size based on maximum spatial and temporal changes for each DMM. Furthermore, feature vector is constructed by using BPoA for each human action view. In this paper, we employed an ensemble based learning approach called Rotation Forest to recognize different actions Experimental results show that proposed method has significantly outperforms the state-of-the-art methods on Microsoft Research (MSR) Action 3D and MSR DailyActivity3D dataset.

• 한국통신학회논문지
• /
• 제7권1호
• /
• pp.18-24
• /
• 1982

高分子材料에서 水分의 영향으로 發生되는 Tree를 硏究할 目的으로 熱的, 化學的으로 安定된 Al2,O2 및 SiO2 徵紛을 添加하여 材에 미치는 영향을 考察하였다.