• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.17-23
• /
• 2006

In Vivo dosimetry is a method to evaluate the radiotherapy; it is used to find the dosimetric and mechanical errors of radiotherapy unit. In this study, on-line In Vivo dosimetry was enabled by measuring the skin dose with MOSFET detectors attached to patient's skin during treatment. MOSFET dosimeters were found to be reproducible and independent on beam directions. MOSFET detectors were positioned on patient's skin underneath of the dose build-up material which was used to minimize dosimetric error. Delivered dose calculated by the plan verification function embedded in the radiotherapy treatment planning system (RTPs), was compared with measured data point by point. The dependency of MOSFET detector used in this study for energy and dose rate agrees with the specification provided by manufacturer within 2% error. Comparing the measured and the calculated point doses of each patient, discrepancy was within 5%. It was enabled to verify the IMRT by using MOSFET detector. However, skin dosimetry using conventional ion chamber and diode detector is limited to the simple radiotherapy.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.237-246
• /
• 2004

Even though the wedge factor was defined by ICRU, RTPS uses other definition different from the wedge factor to consider the wedge effect to correct dose. Because the factors with different concept are defined in a very different way, replacement of different factor could make severe error of dose and is unacceptable because their values are very different from each other. Radiotherapy machine installed in department includes physical wedges and function of dynamic wedge by upper jaws, and Eclipse and Pinnacle$^{3}$ such as RTPS are used. The wedge factors, relative wedge output factors and wedge field output factors of physical wedges and dynamic wedges were measured by an ionization chamber in water phantom. They are analyzed and compared in according to wedge position, field size, wedge angle, X-ray quality, measurement condition. Wedge factor, relative wedge output factors and wedge field output factors of dynamic wedges comparing physical wedges have an effect of several factors. Main factors effecting to the factors of dynamic wedges were field size and wedge angle. Beam quality of X-ray introduces a few effect to the factors. Because the factors related to wedge and defined with different concepts are different from each other, to reduce dose error it should be input by values proper to RTPS.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.342-350
• /
• 1988

An experimental investigation is made to determine the mechanism of the aquation of $[Co(en)_2Cl_2]^+$ in $Hg^{2+}$ aqueous solution. The progress of reaction is followed UV/vis-spectrophotometrically by a measurment of the absorbance at a specific wavelength of Co(III) complex as a function of time. The aquation of cis-$[Co(en)_2Cl_2]^+$ and trans-$[Co(en)_2Cl_2]^+$ has been found to be first order and second order with respect to the concentration of $Hg^{2+}$ catalyst, respectively. It has been found that the reaction rate for aquation of the trans-form is faster than that of cis-form, and that the product of either cis-form or trans-form is always in the mixture ratio of 97 % to 3 %. Plausible reaction mechanism is proposed for the reaction system on the basis of kinetic data and activation parameters. Theoretical rate equation derived from the proposed mechanism is consistent with the observed one.

• Molecules and Cells
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2015

Recent technical developments have transformed how neuroscientists can probe brain function. What was once thought to be difficult and perhaps impossible, stimulating a single set of long range inputs among many, is now relatively straight-forward using optogenetic approaches. This has provided an avalanche of data demonstrating causal roles for circuits in a variety of behaviors. However, despite the critical role that neuropeptide signaling plays in the regulation of behavior and physiology of the brain, there have been remarkably few studies demonstrating how peptide release is causally linked to behaviors. This is likely due to both the different time scale by which peptides act on and the modulatory nature of their actions. For example, while glutamate release can effectively transmit information between synapses in milliseconds, peptide release is potentially slower [See the excellent review by Van Den Pol on the time scales and mechanisms of release (van den Pol, 2012)] and it can only tune the existing signals via modulation. And while there have been some studies exploring mechanisms of release, it is still not as clearly known what is required for efficient peptide release. Furthermore, this analysis could be complicated by the fact that there are multiple peptides released, some of which may act in contrast. Despite these limitations, there are a number of groups making progress in this area. The goal of this review is to explore the role of peptide signaling in one specific structure, the bed nucleus of the stria terminalis, that has proven to be a fertile ground for peptide action.

• Journal of Korean Philosophical Society
• /
• v.146
• /
• pp.115-135
• /
• 2018

This article attempts to deal with the problem that science and technology function as a mechanism to oppress and exploit humans rather than to release humans from labor. To explore this subject, it is necessary to consider the difference between the theory of labor value and the theory of 'technology value'. In addition, it is also important to refer to Marx's critical view of the 'capitalist' use of technology. Above all, Marx' concepts of relative surplus value and special surplus value, and his analysis of organic composition of capital are still valid in explaining that development of technology tightens control over workers and intensity of labor, and worsens instability of employment. Reflection of the limitations of capitalist development of technology is also important for realization of its usefulness. Industry 4.0 in Germany therefore deserves to be noticed as a good example because it shows a different way from extreme capitalist exploitation. The model suggests also some points that shouldn't be overlooked, when we try to actualize the tremendous slogan of the current fourth industrial revolution as real innovation and progress in human life. In this matter, the most important point is the possibility of technological development that doesn't oppose workers' interests.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.162-168
• /
• 2011

In this study, discrimination of shred of frozen and dried Alaska pollack, shred of dried pollack and shred of cod using electronic nose based on mass spectrometer was carried out. Intensities of each fragment from shred of frozen and dried Alaska pollack by e-nose were completely different from those of dried pollack and cod. Each sample was analyzed, and discriminant function analysis was used for the discrimination of similar products. DFA plot indicated a significant separation of each shred of frozen and dried Alaska pollack, shred of dried pollack and shred of cod ($r^2$= 0.7787, F = 185.2). E-nose based on MS system could be used as an efficient method for discriminant of EMA foods.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.122-129
• /
• 2011

In this study, discrimination of salted cuttle fish and salted mitra squid was carried out using electronic nose based on mass spectrometer. Intensities of each fragment from salted cuttlefish by electronic nose were completely different from those of salted mitra squid. Each sample was analyzed, and discriminant function analysis (DFA) was used for the discrimination of similar products. DFA plot indicated a significant separation of each salted cuttlefish and mitra squid ($r^2$= 0.8789, F= 162.13). Electronic nose based on mass spectrometer could be used as an efficient method for discrimination of Economically Motivated Authentication (EMA) foods.

• Phonetics and Speech Sciences
• /
• v.10 no.4
• /
• pp.77-89
• /
• 2018

Speech articulators are coordinated for the purpose of segmental constriction in terms of a task. In particular, vertical jaw movements repeatedly contribute to consonantal as well as vocalic constriction. The current study explores vertical jaw movements in conjunction with bilabial constriction in bilabial stop /p/ in the context /a/-to-/a/. Revisiting kinematic data of /p/ collected using the electromagenetic midsagittal articulometer (EMMA) method from seven (four female and three male) speakers of Seoul Korean, we examined maximum vertical jaw position, its relative timing with respect to the upper and lower lips, and lip aperture minima. The results of those dependent variables are recapitulated in terms of linguistic (different word boundaries) and paralinguistic (different speech rates) factors as follows. Firstly, maximum jaw height was lower in the across-word boundary condition (across-word < within-word), but it did not differ as a function of different speech rates (comfortable = fast). Secondly, more reduction in the lip aperture (LA) gesture occurred in fast rate, while word-boundary effects were absent. Thirdly, jaw raising was still in progress after the lips' positional extrema were achieved in the within-word condition, while the former was completed before the latter in the across-word condition. Lastly, relative temporal lags between the jaw and the lips (UL and LL) were more synchronous in fast rate, compared to comfortable rate. When these results are considered together, it is possible to posit that speakers are not tolerant of lenition to the extent that it is potentially realized as a labial approximant in either word-boundary condition while jaw height still manifested lower jaw position in the across-word boundary condition. Early termination of vertical jaw maxima before vertical lower lip maxima across-word condition may be partly responsible for the spatial reduction of jaw raising movements. This may come about as a consequence of an excessive number of factors (e.g., upper lip height (UH), lower lip height (LH), jaw angle (JA)) for the representation of a vector with two degrees of freedom (x, y) engaged in a gesture-based task (e.g., lip aperture (LA)). In the task-dynamic application toolkit, the jaw angle parameter can be assigned numerical values for greater weight in the across-word boundary condition, which in turn gives rise to lower jaw position. Speech rate-dependent spatial reduction in lip aperture may be able to be resolved by means of manipulating activation time of an active tract variable in the gestural score level.

• The Journal of Society for e-Business Studies
• /
• v.23 no.3
• /
• pp.13-32
• /
• 2018

Btcoin has made a big progress through anonymity, decentralized authority, sharing economy, multi-ledger book-keeping, block-technology and the convenient financial vehicle. Bitcoin has the characteristics of mining and supply by decentralized suppliers, limited supply quantity and the partial money-like function as well as gold. The paper studies the hedge and safe-haven of Bitcoin and gold on daily frequency data over the period of July 20, 2010-Dec. 27, 2017 employing Asymmetric Vector GARCH. It finds that gold has the hedge and safe-haven against inflation and capital markets while Bitcoin has the weak hedge and the weak safe-haven. It shows insignificant effects of inflations of US and Korea on the volatilities of Bitcoin and gold. It also suggests the necessity of clearing of vagueness behind the anonymity for fair and transparent trade through the law application in the absence or fault in law (Lucken im Recht). following the spirit of the living constitution (lebendige gutes Recht oder Vorschrift). The relevant institutions are hoped to be given some of obligations such as registration, minimum required capital. report, disclosure, explanation, compliance and governance with autonomous corresponding rights. The study also suggests the reestablishment of the relevant financial law and taxation law. The hedge would not be successfully accomplished without the vigilant cautions of investors.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.40-44
• /
• 2019

Purpose Glomerular filtration rate (GFR) is an important index for evaluation of renal function, renal disease diagnosis and progress monitoring. Therefore, accurate measurement of GFR is clinically important. Among the factors that affect the GFR result, there have been many discussions on the methods such as the correction of the kidney depth, net syringe count, and the method of setting the ROI. However there has been no consideration of counting in the most basic factors like height and weight measurement. In this study, we investigate how height and weight changes affects the result of GFR and review the importance of standardized body measurements. Materials and Methods Fifty patients who underwent GFR test were randomly sampled and examined for changes in height and body weight within one month. From the normal patients without renal disease to the patients with severely decreased GFR, we applied the GFR formula of Gate with varying height and weight. Results: The result showed variation of the height at maximum three centimeters and six kilograms of weight. The first calculation of GFR was done with fixed height value and control variable as weight. Weight was incremented by one kilogram each time up to six kilograms. The GFR showed increased result with increasing weight. The result of GFR showed ten percent increase with six kilograms of weight increase. On the other hand, when height value was incremented by one centimeter up to three centimeters showed decreased GFR result with fixed weight value. Up to three centimeters of height increase showed two percent of decreased GFR with fixed weight. Conclusion This study showed varying GFR result when height and weight changes. Therefore it is clinically crucial not only to maintain and manage body measuring instrument but also to have a standardized measurement methods to derive accurate measured values and to achieve reproducibility.