• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.57-67
• /
• 2003

This study aims to presents Evaluation Method of Green Remodeling that analyze the value of environment through expense, using the method of life cycle cost and life cycle assessment simultaneously. The results of this study are summarized as follows. Evaluation Model developed in this study can convert economical value of environment into cost by integrating. In addition, the model can apply as a useful tool to estimation of economical design alternative as well as quantification of environmental loads and costs. Evaluation Model presented In this study observe energy consumption and the environmental load emission with qualification, it can forecast effect of environmental cost that cost estimation is expected to be added to energy cost rate by being possible. Synthetically, when Estimation Model and computer program that developed in this study is applies to the construction industry; reasonable management of environmental load is convenient at each step of Green Remodeling. In addition, at preliminary design phase, practical use may be possible by reasonable yardstick about various alternatives and improvement of design alternatives likewise by grasping environmental effect.

• Journal of the military operations research society of Korea
• /
• v.25 no.2
• /
• pp.44-61
• /
• 1999

Cost estimation has posed a significant challenge to estimators, planners, and managers in both government and military. Considerable historical evidence shows that accurate cost estimation has been difficult to achieve across a wide range of projects, including weapon systems. This paper introduces new cost estimating concept, CAIV(Cost As an Independent Variable) and a cost estimating case study using PRICE model, computer aided parametric estimating models(CAPE) for K1 tank cost estimate. CAIV concept is to set realistic but aggressive cost objectives easily in each acquisition program and to achieve cost, schedule, and performance objectives considering various managing risks with a project manager and industry teams. The Price model is one of computer aided cost estimating models and widely used in U.S. defense system analysis as a tool for CAIV. We analyze theories, inputs, outputs of the PRICE model and present a case study for K1 tank to estimate costs in requirement and concept phase, program and budgeting phase, and life cycle phase. Finally we obtain results that the Price model can be used in various phases of PPBEES depending upon available data and time.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1465-1473
• /
• 1994

This paper describes the development strategy and contents of a fatigue life evaluation system, FLEVA. The system is composed of 4 parts; material properties, load histories, cycle counting and life prediction. The cycle counting is based on the rain-flow counting method and peak counting method, and the life prediction is performed based on the linear damage rule. Material properties(static, fatigue) are also provided as a database obtained by a computer aided test system. Case study is performed to verify the developed program.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.307-308
• /
• 2018

• Journal of Families and Better Life
• /
• v.4 no.2
• /
• pp.35-51
• /
• 1986

The purpose of this study is to establish family life cycle of farm and to analyze changes of economic conditions-income, consumption expenditures, savings, assets, and debts-in farm household according to the family life cycle. Income, consumption expenditures, savings, assets, and debts functions are also estimated by age of household head. The data of Farm Household Economy Survey which was conducted in 1983 by Ministry of Agriculture and Fisheries is used in this study. Among total data of 2000, 1603 are analyzed for mean, percentage, and regression using CRISP Program at Office of Rural Development. The results of study can be summarized as follows; 1) Eight stages of family life cycle of farm are established according to the growth of the first child. They are: Establishment stage, Child bearing and preschool stage, Elementary school stage, Middle and high school stage, College and vocational adjustment stage, Period of children's marriage, Re-adjustment stage, and isorganizing stage. 2) The economic conditions of farm household are significantly fluctuated by family life cycle. Among the eight stages, stage Ⅱ is considered relatively comfortable living period and stage Ⅲ, Ⅳ are the most difficult periods of farm household economy. 3) The estimated functions of income, consumption expenditures, savings, assets, and debts by age of household head are as follows; Y(income) = 2, 354, 832+98,456T-1,036T2(F=11.746) C(consumption expenditures) = 81,876+154,976T-1,552T2 (F=37.272) S(savings) = 2,272,956+56,511T+516T2(F=4.262) D(debts) = 903,929+28,300T-438T2(F=3.339) A(assets) = 200,816+1,213,336T-12,930T2(F=21.069) To carry on a reasonable farm household management, a suitable measure to cope with the desire of family and the economic conditions of farm household should be prepared.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.5
• /
• pp.1-10
• /
• 2022

For Cu-Cr alloy developed for rocket engines, estimated fatigue lives were calculated using various fatigue life prediction methods and compared with fatigue life acquired from low-cycle fatigue tests. The utilized methods for fatigue life prediction are as follows: Coffin-Manson relation, plastic/total strain energy density relations, Smith-Watson-Topper relation, Tomkins relation, and Jahed-Varvani relation. As results of estimation of fatigue lives, it satisfied within scatter band two compared to the test fatigue lives in all methods. The quantitative calculation of the deviation of predicted fatigue lives gives that the total strain energy density relation presents the best result.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2015

Productivity of machining using machine tools is affected by cutting conditions such as cutting speed, feedrate and depth. However, undesirable conditions that lengthen the machining cycle and shorten the tool life occur frequently because determination of cutting condition is known to depend on human experience. This paper presents a method of cycle reduction by removing undesirable conditions. For cycle reduction, maximum cutting load is determined using commercial FEM simulation code. The feedrate in the NC program is altered based on a predetermined cutting load value. To make a decision on the proposed effectiveness, a simulation is performed for the brake hub parts of an automobile. From the evaluation, it was found that the cycle reduction was under 15%.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.1
• /
• pp.203-232
• /
• 1999

This study reviewed the, reference of health promotion program and investigated the status of health promotion program at work sites in U.S.A. Good health promotion program is essential for both employees and employers to reduce morbidity rate, to promote productivity and to enhance quality of life and so on. Health promotion aimed at modifying unhealthy life-styles by building awareness, knowledge, skills, and interpersonal support. And health promotion cycle is resemblance to the plan-do-check-act. The major contents of this study are briefed following as : 1) Links between life-style, environment, and health 2) Effect of work sites health promotion effort 3) Prevalence and contents of work site health promotion programs 4) Health promotion process 5) Program framework and structure 6) Stages in the health promotion cycle 7) Approaches for modifying organizational stressors In addition this, the survey was conducted to aim diagnosing the status of health promotion p개gram in work sites in Korea. The main finding-outs are summarized as follows: 1) In 4 large size work sites, there are working with 1 doctor in all work sites, 1 nurse per 3,000 employees and other health related professionals. They have clinic office(4 work sites), gymnasium(2 work sites), and other many facilities like physical therapy center. And only one company have a wellness clinic center. All employees use to exercise health gymnastics in terms of 5 minutes regularly 2 times in a day. 2) In 4 middle size work sites, there are no doctor, 1 nurse and 1 nutritionist in all work sites. They have also clinic, physical therapy center(1 work site), and all employees exercise health gymnastics regularly 2 times in a day too.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.394-399
• /
• 2009

Since some decades ago, there has been a concern for resource depletion and environmental pollution associated with building properties. In addressing such impact of the built environment, there is a recognition of the existence of alternative building materials, fuels for energy supply as well as technologies for waste handling and disposal. Nevertheless, for long time, the choice between such alternatives was dictated by factors such as differences in prices and aesthetic values. A new important dimension in discriminating between different options is the environmental dimension. This aspect is important since buildings are one of the spatially big new additions to the natural environment that consume a lot of materials and energy during their long lifetime. Thus, with the environmental dimension kept in mind, a existing cost estimation needs to be changed. A new cost assessment method, Life Cycle Cost, should calculate overall costs with dimensional factors: investment and utility costs as well as maintenance costs over the lifetime of the building. Aiming to give an overview of the present status of Building Life Cycle Assessment(LCA) tools as a basis for further research and development including economic performance, this paper describes and compares 3 different tools for Life Cycle Assessment(LCA) and economic analysis of the green buildings. This paper compared these approaches based on various aspects. These include economic analysis method, evaluation duration, data of results(index). Use of the comparison analysis is to produce a better picture and indicate profits and shortcomings for the tools as a group; thus providing important direction improvement of LCA tool as well as further research and development of this group of tools.

• Journal of Information Technology Applications and Management
• /
• v.20 no.2
• /
• pp.69-87
• /
• 2013

The expanded spiral model in this paper consists of five processes of architecture design, architectural construction, architectural maintenance, operation, and architectural management. The former four processes are executed alternatively, while the latter architectural management process is executed continuously interacting with the other processes during the whole life cycle of the system. The expanded spiral model provides a conceptual framework to sort discussions of architectural degeneration into those of product-oriented processes and those of management processes, making it possible to incorporate the models and body of knowledge about project and program management especially those of Project Management Institute, into discussions of architectural degeneration. A good architecture decomposes the software-intensive system into components mutually interacting in a well-formed structure. The architecture design process and the architectural construction process together create the object system with well-designed architecture. The architectural maintenance process prevents the implemented architecture deviate from the designed architecture. The architectural management process monitors the changes of requirements including architecturally significant requirements, supports the other processes to be executed reflecting various perspectives of stake-holders, and creates and documents the reasons of architectural decisions, which is considered as a key element of the architecture.