• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.129-129
• /
• 2022

The production area of Italian ryegrass feed is gradually increasing and labor-saving technologies are being developed. If sowing and fertilization are carried out agricultural drones, working hours and labor are reduced. The purpose of this study is to suggest an appropriate seedling amount for feed production by drone spreading of Italian ryegrass in spring. In addition, we would like to review the productivity of the drone seeding machine that is being developed by Rural Development Administration(RDA) of Korea. Italian ryegrass was sown by a drone in February at the NICS located in Gyehwa-hwa, Jeollabuk-do, South Korea. In Experiment 1, 50kg/ha, 60, 70, and 80 seeding rates were sown with a horizontal spreader drone. In Experiment 2, uniform spreaders type drone and horizontal spreader type were sown with the same seeding amount and compared. The drone was sown using the AF-52 aircraft. The higher the seeding amount, the higher the emergence rate. As the seeding amount increased, the plant length increased, but the number of tillers per individual decreased. The dry matter weight of the feed was the highest at 1,326kg/10a at the seeding rate of 70kg/ha, and decreased by 20.5% at the seeding rate of 80kg/ha. The coverage ratio was the highest at 96 at the seeding rate of 70kg/ha, which was the most advantageous for spring sowing. In the comparative experiment according to the spreader type, the uniform spreader had a high emergence rate per unit area. When the uniform spreader was used, the dry matter weight of the feed was 17% higher than that of the horizontal one, and the coverage was about 5% higher.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.135-158
• /
• 2006

The purpose of this study was to provide for the useful fundamental data by developing an appearl sizing system according to body types for Chinese Adult Female. Thus, it was to improve of fittness and coverage rate of exporting domestic clothing to China. For study, It was measured 1360 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1381 female women was seleted for development of apparel sizing system. Thus, this study was to characterize body types of Chinese adult female by classifying them into groups and set coverage rate of ready-made clothes by developing an apparel sizing system according to the Women's Wear Specifications(GB/T 1335.2-1997), National Standards of People's Republic of China. As for the method of this study was done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis. The result was as follows: The clothes dimension for upper and lower body and the coverage rate of body size that had the highest appearance ratio from the entire group was Y-type 160-84$\cdot$160-64(4.6%) and the section 160cm 32.4%, A-type 160-88$\cdot$160-72(3.3%) and the section 160cm 28.1%, B-type 155-88$\cdot$155-78(3.8%) and the section 155cm 27.8%, C-type 150-96$\cdot$150-88(2.5%). The result By setting of representative size number and production coverage rate for Chinese adult female. The representative size number of the entire group was set for 150-80A$\cdot$150-64A(1.0%), 155-84A$\cdot$155-68A(2.6%), 160-88A$\cdot$160-72A(3.3%), 165-84A$\cdot$165-68A (2.8%), 170-96A$\cdot$170-80A(0%). The production coverage rate for each representative size number was SS size the section 150cm 2.8%, size the section 155cm 17.0%, M size the section 160cm 31.6%, L size the section 165cm 25.0%, XL size the section 170cm 12.6% that covered 85.0%.

• Asian Journal of Turfgrass Science
• /
• v.15 no.2
• /
• pp.39-50
• /
• 2001

This research was designed to develop the rapid propagation technology of zoysiagrass using carpet production and to provide turf-growing farmers with efficient cultivation methods thor carpet production. Turfgrass cultivar tested in cadet production by seeding was Z. japonica cv. Zenith. Since the surface coverage rate reached to 85% in 2 months after seeding at the rate 6g/$m^2$ in the early part of July, carpet production using ‘Zenith’seeds would be possible to produce within within the same year. Thrfgrasses tested in carpet production by vegetative propagation were Z. japonica, medium type Z. matrella, fine type Z. matrella, and medium type Z. japonica. Planting rates of vegetative parts (sprigs) were 1.2L/$m^2$, 2.4L/$m^2$, 2.5L/$m^2$, and 5L/$m^2$. Two different sizes of sprig were used; 1~2 nodes and 3~4 nodes. Surface coverage rate was 90% in one year after planting at the rate of 2.5L sprigs of medium type Z. japonica. Therefore, the use of sprigs with 3~4 nodes at the planting rate of 2.5L would be suitable for the carpet prodcution. Three months old zoysiagrass carpet (Zenith) was overseeded with Kentucky bluegrass, perennial ryegrass, and tall fescue at two different overseeding rate. Surface coverage rate was the highest (80%) at the plot overseeded with perennial ryegrass that showed the earliest germination. Suitable overseeding species for the rapid sod formation at the early stage of establishment were tall fescue and perennial ryegrass and desirable overseeding time was from early to middle of September.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.29-36
• /
• 1999

This study was conducted to make the utmost use of the good traits and to improve the poor traits of zoysiagrass through the production technology for mixed lines sod in addition to breeding. Mixed lines sod was produced by mixing broad or middle leaf line with narrow leaf line by volume, a ratio of 1 to 2. The mixed lines sod of zoysiagrass was superior to the single ling sod, which is used commonly, for the establishment rate, coverage rate, shoot density, texture, leaf color, dormancy period cnd color, and visual quality.

• Journal of Fashion Business
• /
• v.12 no.4
• /
• pp.56-72
• /
• 2008

The purpose of this study was to provide with the useful fundamental data by developing the appearl sizing system according to body types for the Women's Wear Specifications(GB/T 1335.2-1997), National Standards of People's Republic of China. Thus, it was to improve of the garment fit and coverage rate for the apparel production assortment and stock of exporting domestic clothing to China. For this study, 581 female women aged in their twenties who lived in Beijing and Shanghai were selected for the development of the apparel sizing system who resident in Beijing and Shanghai in China. As for the method of this study was made three primary items(length, bust girth, waist girth) and seven secondary items. Data analysis were processed by SPSS WIN 10.0 Program was used. The research selected 3 major body measurements, such as stature, bust girth, waist girth and 7 secondary measurements to investigate the body features of the Chinese adult women. The data throughout the study were analyzed by using SPSS WIN version 10.0 S/W. The result were as follows: The clothes dimensions for upper and lower body and the coverage rate of body size that had the highest appearance ratio from the selected age group in 20's were: Y-type 160-84 155-64(5.9%) and the section 160cm 22.6%, A-type 160-80 160-62(39%) and the section 160cm 27.9%, B-type 155-80 155-66(6.2%) and the section 160cm 24.7%. The representative size codes of the Chinese adult women aged in their 20's were set for representing certain body dimensions such as 150-76A 150-60A(0.0%), 155-80A 155-64A(2.4%), 160-84A 160-68A(3.9%), 165-88A 165-72A(0.3%), 170-92A 170-76A(0.0%). The production coverage rates for the each representative size codes were S size the section 150cm 1.5%, M size the section 155cm 15.3%, L size the section 160cm 36.0%, XL size the section 165cm 29.7%, XXL size the section 170cm 11.4% that covered 93.9%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.265-269
• /
• 2009

Technology development for sufficient dry matter production of Chinese milk vetch (CMV) is most important in CMV-rice cultivation system in order to provide sufficient nutrients to rice plants. However, when the CMV plants are dominated by the weed, especially Alopecurus aequalis, the CMV growth could be reduced due to light and nutrient competition. In addition, A. aequalis is potential host of the rice dwarf virus disease. Therefore, control of A. aequalis is necessary to enhance the biomass production of CMV plants when CMV stands are insufficient. The use of chemical like sethoxydim (20%, ai) showed the highest control rate of 84% at early stage and was reduced as application was delayed. A. aequalis control did not change the CMV seedling stand before and after herbicide treatment and the reseeding stand in fall was rather increased 2.2 to 2.6 times. On the other hand, in untreated control, the CMV stand at May 15 and reseeding stand in fall was significantly reduced as compared with the before herbicide treatment. Control of A. aequalis increased the CMV dry matter production by 164% for 50% CMV coverage rate and 63% for 25% CMV coverage rate. This is equivalent to $12.3{\sim}16.4\;kgN$/10a which is greater than the recommended nitrogen rate of 9kg/10a. The result indicates that the control of A. aequalis is an efficient way to enhance dry matter production in CMV-rice cultivation system especially when CMV stand is poor.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.266-274
• /
• 2018

Securing field screens through LTE broadcasting is a very valuable technology in news production because of its locality and concurrency. TV has the advantage of being able to deliver news faster than newspapers and make live coverage on the scene of events and events. To maximize this, not only middle-end broadcasters but also existing broadcasting stations are taking an active role in broadcasting using LTE. However LTE broadcasting has yet to secure any conflicting values of broadcasting stability and securing high-definition. The key to solving this difficulty is the transmission rate of Bit Rate. This paper compares the Bit Rate transmission method, which is variable and fixed, to provide more on-site screens through LTE, and presents the Bit Rate adjustment method as a method of screen stabilization through experiment. Consequently, the most stable broadcast screen can be obtained when transmitting and connecting it to broadcasting in a variable 5M method.

• Korean Management Science Review
• /
• v.30 no.2
• /
• pp.1-10
• /
• 2013

Case studies are made to investigate the relationship between the accuracy of energy production estimation and project feasibility indicators such as rate of return on equity (ROE) and debt service coverage ratio (DSCR) for three wind farm projects. It is found out that 1% improvement in the accuracy of energy production estimation may enhance the ROE by more than 0.5% in the case of P95, thanks to improved financing terms. AHP survey shows that MCP correlation of measured in situ wind data with long term wind speed distribution and hands-on experiences of flow analysis are more important than other factors for more precise annual energy production estimation.

• Journal of Technologic Dentistry
• /
• v.38 no.1
• /
• pp.9-22
• /
• 2016

Purpose: The Purpose of this study are to describe the Dental field of present health insurance for custom-made prosthetic implant by dental technicians' work. Results: A total of 300 dental technicians working at dental laboratories in Korea were randomly selected and surveyed, 206(68.7%) of them were used for the statistical analysis. Conclusion: Average daily working time was 10 hours 66%. The average cumulative credit of the clinic for dental prosthesis fabrication rates was Less than 10 million won(21.8%), 10~80 million won(11.7%), more than one hundred million won(1.5%). Remake dental prosthesis was one more than the monthly average of 98.5%. Causes of remake dental prosthesis was dentist impression 83% but did not pay 62.5%. Dental technicians Implant production period was 7 days(48.5%), 10 days(35%) was commissioned by dentists production time is 5 days(46.1%), 7 days(36.5%). President of dental laboratories 3.86 points and dental technicians 3.06 points knew differently about starting of implant health insurance coverage(p<.001). They alike were in favor of insurance coverage for the implant. Dental technicians were lower by 2.36 points for work do you know whether your health insurance application of dental prostheses. Dental technicians are 2.16 points on whether confidence in the pores payment of insurance coverage dental prosthesis, dental laboratory president was lower by 1.85 points. They are very low with 1.97 points on whether confidence in the rate payment of health insurance coverage dental prosthesis(p<.01). The implant prosthesis abutment selected, the abutments designed, design of the implant upper prosthetic, the upper prosthetic fitting dental technicians participate of dental laboratory president showed higher score (p <.05). Conclusion: Hours of dental technicians were making this short period of remake dental prosthesis-related dental prosthesis. Dental clinic and a detailed representation of the dental prosthodontic fabrication request is required for communication between the laboratory in order to reduce the remake of a dental prosthesis, dental insurance coverage written dental prosthodontic fabrication request should be legislated. Implant classification standard medical practice 1-3 Step conduct a thorough costing a total of no. 73 of the correct classification standard medical practice in addition to eight times defined by the act of dental technicians should be defined.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.11
• /
• pp.1532-1539
• /
• 2014

Although growth rate is one of the main economic traits of concern in pig production, there is limited knowledge on its epigenetic regulation, such as DNA methylation. In this study, we conducted methyl-CpG binding domain protein-enriched genome sequencing (MBD-seq) to compare genome-wide DNA methylation profile of small intestine and liver tissue between fast- and slow-growing weaning piglets. The genome-wide methylation pattern between the two different growing groups showed similar proportion of CpG (regions of DNA where a cytosine nucleotide occurs next to a guanine nucleotide in the linear sequence) coverage, genomic regions, and gene regions. Differentially methylated regions and genes were also identified for downstream analysis. In canonical pathway analysis using differentially methylated genes, pathways (triacylglycerol pathway, some cell cycle related pathways, and insulin receptor signaling pathway) expected to be related to growth rate were enriched in the two organ tissues. Differentially methylated genes were also organized in gene networks related to the cellular development, growth, and carbohydrate metabolism. Even though further study is required, the result of this study may contribute to the understanding of epigenetic regulation in pig growth.