• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.400-413
• /
• 1991

The purpose of this paper is to identify factors affecting the optimum mix of required inputs and other relevant factors which account for the variation in physician's productivity in general hospitals, and to find out their implications for the efficient health planning and management. An extended version of Cobb-Douglas production function and cross sectional data of one day patient census from all general hospitals in Korea in 1988 were used in the analysis. Main results of the analysis and their implications could be summarized as follows : (1) The production function for physician's inpatient service shows the evidence of economies of scale, but the production function for physician's outpatient and adjusted-patient service, which combines both out- and in-patient service, shows that of dis-economies of scale. (2) The physician's role for production for all service is smaller than auxiliary personnel's, which imply that more intensive utilization of nurses, nursing aides and other auxiliary personnel is desirable for improving general hospital productivity (3) In case of physician's inpatient and adjusted-patient service, nurses' role is greater than nursing aides'. Therefore, more extensive utilization of nurses is recommended for the efficient operation of general hospitals. (4) The factor of hospital beds plays the leading role among required inputs in the production for physician's in- and adjusted-patient service. (5) The physician's productivity of general hospitals in rural area is lower than that in urban area. And the productivity of teaching hospitals is lower than that of the other hospitals. Further analysis was made in physician production function based upon the size of hospitals, namely those hospitals below 250 beds and those above. Explained variances by the factor of hospital beds was significantly increased in the case of those hospitals above 250. A more detailed and thorough investigation is needed for verifying factors influencing physician's productivity in general hospitals in Korea.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.78-86
• /
• 2009

A capacity calculation and process analysis is a very important part for the entire ship production planning. Ship's production plan is set up with a concept that the product is produced based on the capacity achievable by the processes while general manufacturing sets up the production plan based on product lead-time. Therefore, in case the calculation of capacity for each process of shipbuilding yard is different from actual conditions, a series of production plan - ship table composition, dual schedule plan and execution schedule plan, etc - may accumulate errors, lose reliability of planning information and cause heavy cost deficit in this course. In particular, in case of new shipbuilding yard, stocks between processes are built up and half blocks are not supplied in timely manner, and that is sometimes due to the clumsiness of the operator but it is more often because of the capacity to execute each process is not logically calculated. Therefore, this paper presents the process to calculate the assembly leadtime and assembly process capacity for shipbuilding yard assembly factory. This paper calculated the block type for calculation of assembly lead time based on block DAP(detailed assembly procedure), and introduced cases that calculate production capacities by assembly surface plate by considering the surface plate occupied area of the blocks that change depending on assembly field area and assembly processes through assembly simulation.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.501-514
• /
• 2011

Recently, there have been many cases in which the difficulty of repair and replacement of principal elements in the bearing wall structure for apartment buildings, which is a major part of apartment buildings in Korea, has led to the reconstruction of buildings rather than their remodeling. To address this problem, the Korea government now allows a floor area ratio of up to 20 %, and has relaxed the building height limits to encourage the use of a rahmen structure instead of a bearing wall structure. However, since reinforced concrete rahmen structures have many problems, including higher floor height and greater construction cost, a great deal of research into rahmen composite precast concrete structures have been conducted. Green Frame, one of the developed prototypes, is expected to provide economic benefits through in-situ production for precast concrete column and beam. For in-situ production of composite precast concrete members, a detailed plan for production, curing, and installation is needed. However, it needs to be confirmed that the space is sufficient to produce the precast concrete members on-site before planning those activities. Therefore, this study proposes in-situ production analysis of composite precast concrete members of Green Frame with the evaluation of structural safety and available area on the parking structure. The result of this study shows that the in-situ production of precast concrete members is possible through a case study.

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.41-50
• /
• 1986

The net primary production in the Korean peninsula was estimated by Miami model, Montreal model and Kira's model, based on 148 meteorological data. The modes in frequency distribution of the values calculated by Montreal and Miami model were found at 1,500g/m2/yr. class and at one step high class in 100g. interval, while by Kira's madel at 1,700g/m2/yr. class. The relationships between values by Miami model(X) and those by Motreal model (Ym) and Kira's model(Yk) can be expressed as follows: Ym=0.365X+944.7, Yk=0.462 X+1006.9 and Yk=1.282Ym-211.5. The total amount of the net primary production in 218,583.4km2, 98.9% of the whole area(220,951 km2) of the Korean Peninsula, was estimated as 290,691,407 tons/yr. by Miami model, 310,751,566 tons/yr by Montreal model and 352,071,901 tons/yr by Kira's model. Therefore, it is reasonable that the organic substance over 300 million-tons is added yearly in the Korean Peninsula, because only 1.1% of the whole area no calculated. In additiion, the net primary production amount of Han-river basin was estimated as ca. 38 million-tons, whether calculated with the meteorological data in level of the Korean Peninsula or with more detail data.

• KSBB Journal
• /
• v.25 no.3
• /
• pp.223-229
• /
• 2010

Fucoidans, polysaccharides that are composed of fucose, uronic acids, galactose and xylose, are one of the main constituents of brown seaweeds. For the past decade algal fucoidans have been extensively studied due to their biological activities including anticoagulant, antiinflammatory, antitumor, contraceptive and antiviral activities. Even though fucoidan is known as a highly functionality derivative, its industrial applications have been limited because of low inclusion efficiency and high cost of manufacturing. Furthermore the sea-weed smell of fucoidan has been a limiting factor for the application especially in food and cosmetic area. The potential application of various extraction technology and deodorization of sea-weed smell is highly required for a wider application of fucoidan. As an alternative extraction process, enzymatic hydrolysis process or ultra-high pressure treatment has been investigated for the improvement of production yield and bioefficacy of fucoidan. More intensive research on the fucoidan production technology and its application in nutraceutical and cosmoceutical area is needed.

• Microbiology and Biotechnology Letters
• /
• v.25 no.5
• /
• pp.501-505
• /
• 1997

The effects of some nutrients and culture conditions on the growth and the production of fumonisin B$_{1}$, (FB$_{1}$) from Fusarium moniliforme NRRL 13569 were investigated in liquid culture. Xylose and soytone yielded the highest mycelial growth as the C- and N-source, respectively. The highest level of FB$_{1}$, was obtained when yeast extract was used as the N-source but no FB$_{1}$, from NaNO$_{3}$. While Fe$^{+++}$ showed inhibition effect on FB$_{1}$, production, Zn$^{++}$ enhanced the FB$_{1}$, production as well as the mycelial growth. FB$_{1}$, was maximally produced when the initial pH value and the specific surface area of the medium was adjusted to 5 and 1.4 cm$^{2}$/ml, respectively. FB$_{1}$ formation reached the maximum value (210, 000 ng/ml) in 30 days and then decreased in Czapek medium substitued with 1% xylose and 0.3% yeast extract, and supplemented with 0.2% NH$_{4}$H$_{2}$PO$_{4}$ where the initial pH value and the specific surface area of the medium are optimally controlled.

• Journal of Information Display
• /
• v.13 no.1
• /
• pp.17-20
• /
• 2012

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product's good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.135-138
• /
• 1993

Twelve intact and 12 docked Najdi lambs of equal numbers of males and females were utilized in the experiment. All lambs were raised under similar conditions until they attained 40 kg shorn and shrunk body weight. Thereafter, lambs were individually fed ad libitum on a diet formulated to contain 11.20 MJ ME/kg and slaughtered after 60 days feeding period. The results showed that Najdi rams averaged 6.14 kg more total gain (p < .05), required 6.80 kg less feed (p < .05) per kg of gain and produced 3.2 and 3.07 kg more (p < .05) carcass and salable cuts weights over the feeding period than comparable ewes. Body wall thickness and kidney and pelvic fat weight were greater (p < .05) for ewes than for rams; dressing percent, longissimus area and fat thickness were not significantly influenced by sex of lambs. Docked lambs kept for 60 days on feed required 1.80 kg less feed (p < .05) per kg of gain and produced 2.21 kg more (p < .05) salable wholesale cuts weight than intact lambs. Docking was not a significant source of variation for total gain, carcass weight, dressing percent, longissimus dorsi area, body wall thickness and fat thickness.

• Journal of Korean Society of Forest Science
• /
• v.94 no.5 s.162
• /
• pp.342-348
• /
• 2005

An exploratory survey was performed to assess the present status of distribution and production of coconut palm (Cocos nucifera Linn.) in the rural landscape of Meghna floodplain of Bangladesh. A multistage simple random sampling technique was adopted to identify the study area and respondents. A total of 50 households were selected randomly for the study. Traditional knowledge on cultivation, management, and production of coconut palm was emphasized. Marketing of coconut palm products and income derived from coconut palm cultivation was taken into consideration. Perceptions of farmers, traders and professionals were described in due context of opportunities and constraints of coconut palm cultivation. Coconut palm cultivation was found to play an important role in household economy in rural Bangladesh sharing considerable contribution to the total income. About 10% of their total annual income was reported to come from coconut husbandry. Highest number of the coconut palms, 24%, was found to grow in the homestead compounds and in the pond banks. About one-third lands of the households were found to be covered by the coconut palms. Maximum, 19%, coconut palms were found in the 16-20 years age-class. Production of coconut was found highest at the age-class 11-15 years. The study found some important opportunities and constraints of coconut farming in rural Meghna floodplain area of Bangladesh. The results of this study would be useful for the rural development practitioners in Bangladesh.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.70-82
• /
• 2014

A nano-power CMOS voltage reference is proposed in this paper. Through a combination of switched-capacitor technology with the body effect in MOSFETs, the output voltage is defined as the difference between two gate-source voltages using only a single PMOS transistor operated in the subthreshold region, which has low sensitivity to the temperature and supply voltage. A low output, which breaks the threshold restriction, is produced without any subdivision of the components, and flexible trimming capability can be achieved with a composite transistor, such that the chip area is saved. The chip is implemented in $0.18{\mu}m$ standard CMOS technology. Measurements show that the output voltage is approximately 123.3 mV, the temperature coefficient is $17.6ppm/^{\circ}C$, and the line sensitivity is 0.15 %/V. When the supply voltage is 1 V, the supply current is less than 90 nA at room temperature. The area occupation is approximately $0.03mm^2$.