• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.123-130
• /
• 2008

A 3D structure production method for microstereolithography is a useful way that produces complex structures with flexible processes and low cost. Several UV curable resins were blended and the optimal resin for micro-lens fabricate was selected through viscosity, workability and transmission tests. It consists of 1, 6 - Hexanediol diacrylate with 15 Apha and Isobornyl acrylate for reducing some shrinkage. When fabricating a micro-lens array on large surface, some distortion of shape occurred because of the surface tension between cured part. To overcome this problem, the optimal processing conditions were derived from considering amount of the resin and surface tension. Large surface Micro-lens array, which are a type of elliptical convex and consist of 18,000 micro-lens in the range of 2cm*2cm were fabricated. The focal length to the X-axis and Y-axis were calculated. To verify the performance, measure an energy distribution of transmitted light from the Large surface Micro-lens array.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.425-428
• /
• 2006

Natural gas hydrate has been a major problem for its plugging nature in the pipeline. With the demand of deep-water production, the importance of flow assurance technology, preventing hydrate, asphaltene and wax in the pipeline becomes bigger Kinetic models combined with the flow simulator are being developed to explain the nature of hydrate plug formation in the pipeline. To simulate the hydrate plug formation, each stage including the nucleation, growth and agglomeration should be considered. The hydrate nucleation is known to be stochastic and is believed hard to be predicted. Recent publications showed hydrate growth and agglomeration can be observed rigorously using a particle size analyzer. However properties of the hydrate should be investigated to model the growth and agglomeration. The attractive force between hydrate particles, supposed to be the capillary force, was revealed to be stochastic. Alternative way to model the hydrate agglomeration is to simulate by the discrete element method. Those parameters, particle size distribution, attractive force, and growth rate are embedded into the kinetic model which is combined Into the flow simulator. When compared with the flowloop experimental data, hydrate kinetic model combined into a flow simulator showed good results. With the early results, the hydrate kinetic model is promising but needs more efforts to improve it.

• 산업경영시스템학회지
• /
• 제8권11호
• /
• pp.57-68
• /
• 1985

Theories of capital have historically been amongst the most fertile sources of economic controversy. Many aspects of the modern debate, if not the techniques employed in its exposition, would have been as familiar to Marx, Ricardo, Bohm-Bawerk or Wicksell as to any present-day Cambridge economist. That conotroversies should arise in the course of theorizing cm the concept of capital and the function of profit is not surprising: that these debates have been so vigorous and virluent cannot be divorced from the general ideological and specific implications associated with the theories. In the context of a textbook on the theories of economic growth, the central question associated with capital that must he faced is whether the existence in the real world of heterogeneous capital goods inevitably invalidate; the conclusions of simple theories of "parables" which incorporate no more than a conception of a single, malleable, capital good. All the Cambridge writers have, to a greater or lesser extent, been concerned to deny that any unit can be found in which heterogeneous capital goods can be aggregated so as to simultaneously satisfy the pair of neoclassical requirements described above. Some of them have been more prepared than others to countenance such a possibility or, for practical purposes, to use some concept of aggregate capital in their models, but they are all deeply suspicious of attempts to use aggregate production function, incorporating aggregate "capital", so as to explain the flow of output, relative factor prices and the distribution of income.tribution of income.

• 한국의류학회지
• /
• 제46권5호
• /
• pp.910-926
• /
• 2022

Suitability for the human body, freedom to move and thermal insulation are important design considerations in military clothing. This study investigates the performance and wearer-satisfaction of the functional inner winter uniform currently used in Korea; it is hoped that our data can inform the development of a future version. Interviews were conducted, in which the participants suggested various improvements. The uniforms were mainly worn for guard duty or as daily attire in cold weather. The participants chose how many layers to wear according to the current situation, rather than sticking to the layering recommended in the manual. Layering choices did not significantly affect combat efficiency but were found to affect wearers' comfort. Wearers' satisfaction was found to depend on the convenience of the clothing, whether it was in the appropriate size, freedom to move and thermal insulation. Also, this study suggests a problem with the current size system, as the analysis of size distribution, across all sizes, the range of current production is insufficient to cover the demand.

• 한국작물학회지
• /
• 제52권2호
• /
• pp.220-227
• /
• 2007

Sweetpotato fields in Korea are highly infected with virus and virus like diseases that greatly diminish both yield and quality as indicated by field observations and laboratory tests. In order to solve this problem, there is an urgent need to produce and mass propagate virus-free planting materials for distribution to the farmers. These experiments were conducted, firstly, to determine the most appropriate culture media, nutrient solution, and cutting intervals to maintain growth and vigor of tissue cultured plantleta as mother plants for propagation in insect-proof greenhouse. And as a labor saving method, the production efficiency of plug trays for rapid propagation of stem cuttings as a source of planting materials was likewise evaluated. Results showed that plants grown in medium B supplied with 0.5 and 1.0 strength of MS nutrients had high growth rate, and 20-day cutting interval was the best. 72-plug tray was better than 128-plug. Secondly, it was to develop a technique for the production of first-generation seed roots using hydroponics cultivation system. The yield of virus-free plants propagated in the non-insect proof and open-field cultivation was 2,402 kg/10a, 6% higher than those in the insect-proof cultivation, and the rate of virus re-infection was 18% higher compared to 3.3% with insect-proof cultivation. Lastly, it was to investigate the growth performance of virus free plants in farmers' field. Differences were existed in the yield depending on the variety used, but virus free plants showed an increase of $6{\sim}24%$ over virus infected plants.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권4호
• /
• pp.477-484
• /
• 2010

현재 국내 수산건조제품의 대부분은 천일(태양)건조에 의하는 실정으로 보관과 유통상의 위생안전성과 품질면에서 심각한 문제점을 안고 있다. 본 논문은 생산 현장에서 운용이 쉽고, 경제적이면서도 최고 건조품질을 유지할 수 있는 현장 지향적 저온진공 건조시스템의 설계 개발을 목표로 건조시간 경과에 따른 무게 감소율과 온도변동에 관한 실험적 결과를 요약하여 보고한 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1859-1864
• /
• 2004

An effective methodology is reported for the optimal design of multisite batch production/transportation and storage networks under uncertain demand forecasting. We assume that any given storage unit can store one material type which can be purchased from suppliers, internally produced, internally consumed, transported to or from other plant sites and/or sold to customers. We further assume that a storage unit is connected to all processing and transportation stages that consume/produce or move the material to which that storage unit is dedicated. Each processing stage transforms a set of feedstock materials or intermediates into a set of products with constant conversion factors. A batch transportation process can transfer one material or multiple materials at once between plant sites. The objective for optimization is to minimize the probability averaged total cost composed of raw material procurement, processing setup, transportation setup and inventory holding costs as well as the capital costs of processing stages and storage units. A novel production and inventory analysis formulation, the PSW(Periodic Square Wave) model, provides useful expressions for the upper/lower bounds and average level of the storage inventory. The expressions for the Kuhn-Tucker conditions of the optimization problem can be reduced to two sub-problems. The first yields analytical solutions for determining lot sizes while the second is a separable concave minimization network flow subproblem whose solution yields the average material flow rates through the networks for the given demand forecast scenario. The result of this study will contribute to the optimal design and operation of large-scale supply chain system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.163-166
• /
• 1997

Aluminium foam material is a highly porous material having complicated cellular structure defined by randomly distributed air pores in metallic matrix. this structure gives the aluminium a set of properties which cannot be achieved by any of conventional treatments. The properties of aluminium foam material significantly depend on its porosity, so that a desired profile of properties can be tailored by changing the foam density. Melting method is the one of foaming processes, which the production has long been considered difficult to realize becaues of such problems as the low foamability of molten metal, the varying size of. cellular structures, solidification shrinkage and so on. These problems, however, have gradually been solved by researchers and some manufacturers are now producing foamed aluminum by their own methods. Most of all, the parameters of solving problem in electric furnace were stirring temperature, stirring velocity, foaming temper:iture, and so on. But it has not considered about those in induction heating, foaming velocity and foaming temperature in semi-solid state yet. Therefore, this paper presents the effects on these parameter to control cell size, quantity and distribution.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.146-157
• /
• 2006

Traditional spinning systems have reached profitability limits in developed countries due to high production costs and low system productivity. Pneumatic spinning is seen as a developing system, because productivity is much higher than conventional systems. This study evaluates one of the main problems to increase productivity in pneumatic spinning, where air mass-flow is dragged by the drafting cylinders. This flow interacts with the incoming fibres deviating them from their expected path. Via laser anemometry, airflow velocity distribution around drafting cylinders has been measured and it has been found that vorticity is created at the cylinder's inlet. Extensive CFD simulation on the air flow dragged by the cylinders has given a clear insight into the vortex created, producing valuable information on how cylinder design affects the vorticity created. Several drafting cylinder designs have been tested without giving any improvement in productivity. However, the use of a drafting cylinder with holes in it produced good results to the problem of air currents, strongly reducing them and therefore allowing a sharp increase in yarn quality, as well as an increase in productivity. An extensive study on vortex kinematics has been undertaken, bringing with it a better understanding of vortex creation, development and breakdown.

• Industrial Engineering and Management Systems
• /
• 제14권4호
• /
• pp.372-378
• /
• 2015

In labor-intensive enterprise, such as garment factory, assembly line is widely used as a manufacturing process for reducing costs and production time. However, for the sake of the various working capacity of worker, idle or delay may happen and influence the rear processes. If these unforeseeable delay happened continuously, it may influence the whole manufacturing process and a model, which is called limited-cycle model with multiple periods (LCMwMP), is assumed to evaluate the influence risk. In order to minimize the risk, the assignment of the workers is focused on. In this paper, we deal with an assembly line as LCMwMP model when two kinds of workers exist, whose efficiency is assumed to two different groups. We consider an optimization problem for finding an assignment of workers to the line that minimizes total expected risk, which is exchanged to expected cost by reset model of LCMwMP. First, reset model as a simple model of LCMwMP is introduced. Then, some hypotheses of the rules of the optimal worker assignment are proposed and some numerical experiments are researched assuming the processing time as Erlang distribution. Finally, the other rules on other certain conditions are discussed.