• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.73-78
• /
• 2011

The existent cutting insert have occupied most product of grinding style, because it has a problem of accuracy and manufacturing process. The product has a concept but development is difficult, because grinding and manufacturing by press are impossible. But by development and stabilization of a technology, preference of non-ground insert increases gradually. And then insert that grinding is impossible is developed availably as non-ground product by using developed equipment and software. In this paper reports some experimental results on the machining performance of non-ground Cutting inserts. Three kinds of Cutting inserts were manufactured without using grinding process. Machining experiments were carried out to compare the machining performance of non-ground inserts with that of ground ones. The experimental results indicate that the cutting forces and tool wear and surface roughnesses of machined surface of both ground and non-ground inserts are comparable.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.585-589
• /
• 2009

Extruder is divided to greatly three part at extrusion process. First, by hopper(Hopper) second, barrel(Barrel) with Screw that is point of extruder and third that is raw material supply wealth extrusion into dies(DIES) Part that decide shape of do product greatly divide. Hopper is role that distribute in raw material supply wealth (Feeding zone) of Screw preserving raw material in state of high quality how at extrusion process, and make distributed raw material as Screw in barrel rotates and 3 stage and inflicting heat and pressure raw material melting(Melting) state. And raw material of melting state Screw's measuring stoker(Metering zone) whereabouts anaphora do and product is completed through pipe channel of dies. Dies that is the most important as Screw in extrusion is part that is last part of melting state process of raw material and causes huge effect in quality of product. If more than design of dies happens, manufacture itself of dies is hard, but there are a lot of amount of losses accordingly. In this research, make pipe channel that raw material of melting state flows in dies can present dies basic design method through flow analysis of ideal pipe channel using CFdesign.

• 패션비즈니스
• /
• 제17권4호
• /
• pp.58-74
• /
• 2013

This research is a case study for the planning process and production process of design project done through industry-university collaboration research. Proposed for the design process and result for the development of the corporation's promotional fashion items. In addition, during the 3-month study period, went through the research process of a number of design, planning, meetings, discussions, and colorway, sample production and selection. The study was carried out using mainly necktie and scarf, the ones one can make use of the best among men's and women's fashion items as fashion items for promotion. The design work was done using Adobe Photoshop CS5, Adobe Illustrator CS5, Texpro 11 version programs. This study is a design development case study where design research experts and the persons in charge from the company took part in for the PR the company demands, and wish it to be used as a basis material for improving company image as a fashion product for the PR of a company.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.94-105
• /
• 2010

Todays, there is fast transition about the new manufacturing IT methodologies from the conceptual phase into the practical application phase for the strengthening of enterprise competitiveness in manufacturing industry. One of those new methodologies is PLM (Product Life-cycle Management). PLM methodology consists of 3D CAD for the product design, PDM (Product Data Management) for the data management based on the collaboration platform and lastly DM (Digital Manufacturing). DM has evoluted from the stand-alone computer simulation of early 1980s, and now it covers the overall production development and production. Unfortunately, there exist serious critical problems about the actual application of DM for the real work. This is owing to the transition of the point of view from stand-alone type application (such as flow simulation or robot simulation) to that of business process about product development and production management. In this paper, we propose an application framework for the successful project with the digital manufacturing methodology with the concept of Information Strategy Planning, which enables the systematic diagnosis and the quantitative evaluation. Also, we introduce the actual practice of the proposing framework with the ISP project for 'Analysis & Simulation Technique of manufacturing process project' that is being conducted by Chungnam Techno Park.

• 한국의류학회지
• /
• 제37권2호
• /
• pp.213-223
• /
• 2013

This study presents the process of fashion item development with velvet through creative thinking methods. Creativity is one of the most important requirements for a successful job career and education enhancing creative thinking is needed in the area of fabrication, product design, and marketing strategy development. Velvet was selected as a research stimulus because it is a luxurious fabric with various differential properties such as a soft touch, unique luster, excellent drapability, and fine physical properties. The research methodology included creative thinking methods review, the selection of the tools, idea sourcing and listing, sequential idea evaluation and sample product making. After review of the various creative thinking methods, a combination method and forced connection method were employed as research tools to confirm the usefulness of creative thinking training because of their independence of use and application simplicity. A total of 12 university students participated as subjects in this research. After some training, each student derived ten ideas for velvet products that utilized a combination method and forced connection method. A total of 120 ideas were evaluated for novelty, technical possibility, practicality, and marketability; subsequently, 24 ideas were adopted and developed as sample products. The effectiveness of creativity education in fabrication and product design classes was verified through the whole process of product planning.

• 벤처창업연구
• /
• 제5권4호
• /
• pp.95-111
• /
• 2010

현대의 기업 경쟁력은 경쟁력 있는 신제품 개발이 필수적이다. 기업이 지속적인 성장을 하기 위해서는 신제품을 개발해야 한다. 본 논문에서는 제품 설계의 고객의 목소리를 충분히 반영한 제품을 제안하였다. 1차 설계에서 Kano의 매력 품질특성을 반영하여 설계하였고, 2차 설계에선 Kano 품질 특성에서 일원적 품질특성이 Timko가 제안한 고객만족지수 방법을 통하여 찾아진 고객 요구를 만족하는가를 분석하였다. 또한 Kano의 매력품질을 찾는 기법과 Timko의 고객만족지수를 찾는 기법을 신제품 개발에 적용하면 매우 효과적으로 문제를 해결할 수 있다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.127-133
• /
• 2006

Minimizing the total number of setup changes of a machine increases the throughput and improves the stability of a production process, and as a result enhances the product quality. In this context, we consider a new product-mix problem that minimizes the total number of setup changes while producing the required quantities of a product over a given planning horizon. For this problem, we develop a mixed integer programming model. Also, we develop an efficient heuristic algorithm to find a feasible solution of good quality within reasonable time bounds. Computational results show that the developed heuristic algorithm finds a feasible solution as good as the optimal solution in most test problems. Also, we developed a web based scheduling and monitoring system for a zinc alloy production process using the developed heuristic algorithm. By using this system, we could find a monthly zinc alloy production schedule that significantly reduces the total number of setup changes.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.35-43
• /
• 1997

Concurrent Engineering is one of the methods which are used for the rapid product development. One of the important features in Concurrent Egineering is that the development process is to be parallel and the organization should be cross-functional. In order that the process be parallel and that the organization be cross-functional, an integrated information system such as PDM (Product Data Management) is required. Although the integrated data base is constructed, it could be meaningless if the application softwares were not inter-operable. This study shows an example of intergrated information system from three-dimensional product design to mold design and tooling for the development of Deflection Yoke(DY) which is one of the important parts of Cathode Ray Tube(CRT). A three-dimensional product design software, which is based on a commercial code, has been developed by ourselves. Selective Laser Sintering(SLS), which is one of the rapid prototyping techniques, has been used in this study. Mold design has been done by the three-dimensional way. A newly developed method of mold tooling, which is called Quick Die Manufacturing(QDM), has been introduced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.186-191
• /
• 2008

Injection molding is used to manufacture various kinds of products including very thin plate like frames. One such product is Door video phone system Panel which is our present object of investigation. During the molding process, large deflection problems in the final product always provokes for the several trials for the accuracy. To solve the issue we use Moldflow6.2 which is injection molding simulation software. It simulates the product exactly the way it happens in actual manufacturing environment. Differences in the geometrical parameters such as thickness changes will lead to the large deformation problems in the frame. However in our present study we simulate it in a well defined condition under several trials. Interesting observations are made in minimizing the deformation of the frame during the injection molding process. This way of approach is very useful in further works if any changes have to be made in the product.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.18-25
• /
• 2018

Both injection and injection molding dies have evolved into advanced technology. Product quality is also evolving day after day. Therefore, the conditions of the injection mold and the injection conditions are becoming important. In order to improve the quality of the product, the Hardware part of the mold has developed as an advanced technology, and the Software part has also developed with advanced technology. This study deals with the cooling part, which is part of the hardware. In addition to fluid cooling, which is commonly used in the industry, by using gas cooling identify the phenomena that appear on the surface of the product and the critical point strain of the product to find the optimal cooling. Electronic parts and automobile parts whose surface condition is important, the cooling process is important to such a degree that they are divided with good products and defective products according to the cooling process at the time of injection. By controlling this important cooling and reducing the injection time with additional cooling, the product quality can be increased to the highest production efficiency. In addition, high efficiency can be achieved without additional investment costs. This study was conducted to apply these various advantages in the field.