• Elastomers and Composites
• /
• 제52권4호
• /
• pp.332-335
• /
• 2017

The national competency standards (NCS) is the national standard for standardizing the skills needed to successfully carry out the duties of industrial sites. It consists of competency units and their sub units. Two standards were developed for the manufacturing of Korean rubber products: rubber compounding and rubber product manufacturing. Each standard consists of ten competency units and their elements. Learning modules will be developed in the near future. It is expected that researchers and workers in the Korean rubber industry will utilize these standards.

• 한국항공운항학회지
• /
• 제16권3호
• /
• pp.50-57
• /
• 2008

This paper analyse the economic inducement effects of aviation industry using Input-Output Model. For measuring economic inducement effects of aviation industry on korean economy, this paper divides air transport industry as two - manufacturing industry and service industry. we also use Input-Output Table of year 1990 through 2003 from Bank of Korea. Empirical results tells that aviation manufacturing industry have high product inducement effects to national economy although its low value-added coefficient such as 0.486 for aviation manufacturing industry and 0.447 for aviation service industry. public R&D doesn't have much effect to each of aviation industries.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.625-629
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS (Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 경영과학
• /
• 제12권2호
• /
• pp.165-188
• /
• 1995

The conversion processes from traditional job shops to cellular manufacturing systems can be viewed as an aggregation of cause-and-effect relationships among many strategic, managerial, and technical variables. Therefore, management needs to fully understand these interacting variables and possible relationships between the variables to successfully convert their plants to cellular manufacturing systems. The purpose of this study is to assist such management's needs in part. The objectives of this research are i) investigating contingency variables that may affect the conversion processes and outcomes to cellular manufacturing systems and ii) examining relationships between the variables and the conversion processes and outcomes. In this paper, particularly three categories of variables are examined: product, process routing, and process technology / facilities characteristics. Literature review and the mail survey method are used. The results are compared and synthesized with the findings of previous studies for useful discussions. Some previous arguments and propositions are empirically supported.

• 기술혁신연구
• /
• 제6권2호
• /
• pp.80-100
• /
• 1998

The application of computers and information technologies progressed with remarkable pace has paved the way for technological innovation toward the efficient integration of various functions in a manufacturing system. Actually it is observed that the greater part of manufacturing companies already initiated significant efforts to integrate information systems and attained the level of integration to some extent. The purpose of this paper is to clarify the strategic direction that manufacturing firms are pursuing through integrating information systems. Using the extensive data gathered from Japanese manufacturers, it is attempted to find the differences in competitive priorities and action programmes between the companies with high and low-level system integration. Our empirical data reveals that the manufacturers with highly integrated system are focusing their competitive capabilities on the rapid design change and new product introduction, and accordingly they place a greater emphasis on the action programmes related to design, process and quality improvement. As a conclusion, highly integrated firms tend to pursue new product development strategy more intensively, thereby they want to be a preemptor in the new market through exploiting technological advantages of integrated manufacturing system.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.51-64
• /
• 2006

The PL (Product Liability) Law has been going into effect in Korea since July 2002. Accordingly, a company's responsibility for customers who are damaged by the defect in the product safety has been gradually strict and imposed burden on management. This paper presents suggestions as to PL prevention of diary manufacturing companies through the case research of PL prevention strategies and the prevention systems of the domestic diary manufacturing company.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 추계학술대회
• /
• pp.315-324
• /
• 2011

The purpose of this study is to improve for the inhibition of the generating the PCH(Propylene Chlorohydrins) in HPMC(Hydroxypropylmethyl Cellulose) manufacturing process. HPMC is made of cellulose which is natural high polymer. And HPMC is applicable to several industrial areas. Especially it can be used in food industrial as an effective additive. PCH is the by-product which is generated in chemical reaction in HPMC manufacturing process. So it is essential to eliminate PCH for the improvement of product quality. Therefore we have studied to minimize the amount of PCH. It is expected that the application of HPMC could be enlarged as the result of this study.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.473-476
• /
• 2005

Today's manufacturing industry is facing challenges from advanced difficult-to-machine materials (WC-Co alloys, ceramics, and composites), stringent design requirements (high precision, complex shapes, and high surface quality), and machining costs. Advanced materials play an increasingly important role in modem manufacturing industries, especially, in aircraft, automobile, tool, die and mold making industries. The greatly-improved thermal, chemical, and mechanical properties of the material (such as improved strength, heat resistance, wear resistance, and corrosion resistance), while having yielded enormous economic benefits to manufacturing industries through improved product performance and product design, are making traditional machining processes unable to machine them or unable to machine them economically. In this paper, mechanical characteristic evaluation test of fine powder type WC-Co alloy was accomplished to obtain clear data for miniaturized special die parts machining with high reliability and high quality.

• 산업경영시스템학회지
• /
• 제29권4호
• /
• pp.91-99
• /
• 2006

A POP system, which collects manufacturing data from the shop floors and supply them to higher level systems, should be maintained and upgraded according to the change of production environment such as new product introduction. This situation leads to the need of a cost-effective system development methodology. In this paper, a methodology based on the classification and the similarity comparison of manufacturing processes is proposed. In this, a new product is classified according to the similarity of its manufacturing processes, which enables recycling of existing system modules. The proposed methodology has been tested in the case of an electronics parts manufacturing company, where a POP system is implemented. The result shows that the proposed methodology can save time and efforts for system implementation.

• 산업융합연구
• /
• 제2권2호
• /
• pp.31-46
• /
• 2004

The ratio of industrial injury in Korea is higher 2~4 times than advanced nations like Japan and Singapore, because the industrial injuries in small-medium industry are higher than large size industry. The investment ability is insufficient for working conditions and prevention of the industrial injuries in the small & medium industry. The industrial safety management of machinery manufacturing for transportation, chemical factory, textile product manufacturing, wire & circuit products for computer, plastic goods manufacturing, and metal products manufacturing was investigated. Therefore, the purpose of the paper is to recognize the seriousness of the industrial injuries, understand product, layout, and machinery, and working conditions, etc., and indicate safety engineering techniques for improvement of quality and productivity under this safety working conditions.