• 한국조경학회지
• /
• 제35권6호
• /
• pp.29-36
• /
• 2008

This study examined the de-icing agents' stresses on Pinus strobus and Pinus thunbergii by chlorophyll fluorescence analysis. The assumption of this study was that photosynthetic efficiency was changed by de-icing agents applied onto highways in winter by altering the concentration of the de-icier, types of de-icer and leaf surface coating liquid application. The practical purpose of this study was to investigate the de-icing gents stresses on Pinus strobus by the highway area where de-icing agents were used frequently and to discover out minimizing stratages to prevent further damages. or this simulation study, a sample plot was established in Bogae-myeon, Anseong, Gyeonggi-do and Pinus strobus and Pinus thunbergii were planted for the examination in April, 2005. Five types of de-icing agents - NaCl, $CaCl_2$, T product(NS40:low cWoride de-icer type), NaCl+$CaCl_2$ and T product+$CaCl_2$ - were selected and the their concentration was altered to 0%, 5%, and 9%. Five types of de-icing agents were applied to both trees treated by a leaf surface coating liquid and trees not treated by leaf surface coating liquid. For the fluorescence analysis, the leaf surface coating liquid, which was diluted by 10 times, was sprkinkled onto the two tree species three days prior to gathering samples. Sample leaves from the two tree species were gathered at 10 o'clock in the morning of mid-August, 2006 and brought to the laboratory within three hours to be dipped in different concentrations (0%, 5%, or 9%) of the five de-icing agents for two minutes. Then the eaves were placed on the filter paper dipped in each solution on a petri dish, sealed with polyethylene film and kept in a growth chamber at $22^{\circ}C$ for 72 hours. Out of the growth chamber, the leaves were treated with a chorophyll fluorescence reaction analyzer for 30 minutes to measure the initial light acceptance rate(Fo), maximum light acceptance ate(Fv/Fm), light acceptance usage(F' q/F' m) and optical electron delivery coefficient(qP). As a result, Pinus strobus' initial light acceptance rate(Fo) decreased as T product and NaCl increased in concentration, and $Cal_2$ did not reduce much with the eaf surface coating liquid application. Maximum light acceptance rate(Fv/Fm) and light acceptance usage(F' q/F' m) decreased sharply as T product and NaCl increased in concentration and NaCl+$CaCl_2$ and T product+$CaCl_2$ did not reduce much with leaf surface coating liquid application. Optical electrons delivery coefficient (qP) decreased as T product increased in concentration on trees without the leaf surface coating liquid application and all other de-icing agents did not show much reduction. As for Pinus thunbergii, the initial light acceptance rate(Fo) decreased as T product increased in concentration, but the maximum light acceptance rate(Fv/Fm) was not reduced much by changes in concentration. light acceptance usage(F' q/F' m) decreased as NaCl increased in concentration and optical electron delivery coefficient(qP) decreased as NaCl increased in concentration in both with and without leaf surface coating liquid application. In conclusion, it was possible to plant Pinus strobus if spraying leaf surface coating liquid or cleaning deicing salt to prevent the damage caused by deicing agents was more economical than replacing the trees. If not, it was better to plant Pinus thunbergii. Another way to decrease the deicing gents stresses of landscape plants would be planting the trees further away from the roads even though it might take longer period to display its planting functions.

• 한국전산구조공학회논문집
• /
• 제21권6호
• /
• pp.543-553
• /
• 2008

최근의 제조 산업에서 제품개발 정보는 제품 수명주기 관리(PLM: Product Lifecycle Management) 시스템을 통하여 관리하고, 조달과 생산 계획에 관련된 통제는 전사적 자원관리(ERP: Enterprise Resource Planning), 생산 관리 시스템이 담당하고 있다. 특히, 효율적인 제품 개발과 시스템 구축 여부는 설계 및 생산, 원가 관리 전체에 걸쳐 영향을 미친다. 따라서 도면, 모델, 자재 정보 등 제품정보관리를 위한 PLM시스템의 역할이 매우 중요하게 여겨지고 있다. 이러한 PLM체계는 요구 사항 분석, 시스템 설계 그리고 기존 Data Migration 등 정보 시스템 개발 절차를 따라서 수행된다. PLM시스템은 전사적인 시스템 개발 과정에서 Prototype개발을 진행하여 구축 절차와 체계 설계를 검증하는 것이 효과적이다. 이 과정에서 PLM 아키텍처 및 제품 구조(Product Structure) 구성, PLM의 기능 개발을 수행한 후에 전체 시스템 설계 개발을 재 수행하는 것이 효과적이다. 본 연구에서는 조선 PLM구축에 필요한 절차와 체계 설계 방법을 제시하고, 이를 초기 기본 설계 단계에 적용하여 PLM구축 방법론을 제시하고자 한다. 초기 설계를 대상으로 요구사항을 도출하고, PLM의 아키텍처를 설계하였으며, 설계한 시스템을 Prototype형태로 제시하였다.

• 정보처리학회논문지D
• /
• 제11D권1호
• /
• pp.133-142
• /
• 2004

차세대 웹 애플리케이션은 거대하고 복잡하고 유연성을 요구한다. 에이전트 지향 시스템은 이러한 애플리케이션에 큰 가능성을 가지고 있으며, 에이전트는 동적으로 발견할 수 있고, e-서비스를 합성할 수 있고 상호작용을 중재할 수 있다. CBD(Component Based Development)를 통한 소프트웨어 에이전트의 개발은 프로젝트의 개발 속도를 증가시키며, 좀 더 나은 품질을 제공하며 낮은 개발비용으로 성공을 증명할 수 있다. 본 논문에서는 컴포넌트와 UML(Unified Modeling Language)을 사용한 소프트웨어 에이전트를 위한 체계적인 개발 프로세스를 제안한다. 일반 에이전트와 e-비즈니스 에이전트의 분류를 통해 식별된 관련 컴포넌트 계층에 대한 ebA-CBD 참조 아키텍처를 제시한다. 또한, UML로 사용한 의미적인 프레임워크에서 에이전트 지향 개념을 기반 함으로써 기존의 에이전트 지향 소프트웨어 광학 방법론의 특징을 고려한 가이드라인으로 ebA-CBD 프로세스를 제안한다. 첫 번째로 에이전트 컴포넌트 명세를 개발하고, 목표, 역할, 상호작용과 아키텍처 모델을 작성한다. 제안된 프로세스에 따라 사례 연구로서 상품정보의 메일링 서비스인 e-CPIMAS(e-Commerce Product Information Mailing Agent System)를 개발한다. 끝으로 비즈니스 애플리케이션과 e-비즈니스 에이전트를 개발하기 위해 그 효율성, 재사용성, 생산성과 품질성 증가를 기대한다.

• 한국CDE학회논문집
• /
• 제11권1호
• /
• pp.11-19
• /
• 2006

For several years, a research about the simulation for shipyard and shipbuilding has been performed. This research is based on the concept of PLM (Product Lifecycle Management) and DM (Digital Manufacturing). Global leading companies and research center are trying to get a good position of PLM, especially M&S field. Digital shipbuilding is to computerize shipyard facilities and shipbuilding processes, and to simulate expected scenarios of shipbuilding processes using a computer model in order to resolve a potential problem such as a bottleneck processes, and over loaded resources. In this paper, simulation methodology for shipbuilding is described. In addition, a local and global strategy for the use of simulation methodology is suggested. Finally, case studies about an indoor shop and an outdoor shop are described.

• 복식문화연구
• /
• 제20권5호
• /
• pp.775-781
• /
• 2012

There are various kinds of patterns on Li brocade textile of Hainan province in China. Those patterns are rich and colorful. Li (黎族) traditional brocade is an ancient exquisite craftsmanship and a world cultural heritage. This study analyzed and categorized Li brocade pattern of traditional Chinese textiles. Li (黎族) traditional brocade is an ancient exquisite craftsmanship. Based on the research of classifications of Li brocade patterns, expound the application of women's costume. The patterns of Li brocade textile of Hainan province analyzed through three levels: design transforming, meaning prolongation, and refining spirit. The patterns were explored the feasibility way to inherit the patterns of Li brocade for the modern fashion product design. The results showed that Li brocade textile pattern of Hainan province were images sourced from local environment and geographical terrain. They contained the nation's history memory, religion, hope for life of the Li nationality. Those patterns can be categorized as human figure pattern, animal pattern, geometric pattern, appliance or architecture pattern, and Chinese character pattern.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.322-325
• /
• 2001

This paper is focused on the development of the DFX system which can support the task that designer or project teams analyse and evaluate the feasibility of the product concept quickly, and then improve the problem of the product and process design before the manufacture in the M-T-O (make-to-order) environments. In this paper, we importantly treated three points for the effective development of the DFX system. The first, we proposed the procedure and architecture of the DFX system which fit with the M-T-O environments. The second, we designed and implemented the DFX prototype system on the WWW, in order to allow the multi-accessing and multi-processing regardless of time and position. The last, we described the benefits of the Web-based DFX system.

• 품질경영학회지
• /
• 제22권1호
• /
• pp.188-204
• /
• 1994

Most of computer-aided process planning(CAPP) systems have been developed to automate the process planning function. In this paper, we describe an analytical model for a CAPP system in order to improve the performance of production system in flexible manufacturing systems(FMSs) for computer intergrated manufacturing(CIM) architecture. This paper proposes an optimal process planning that minimizes the load time by minimizing the cycle time and the number of workstations using Kang and Hahm's heuristic approach so as to improve the performance of production system under the batch production of discrete products. We also perform simulation using SIMAN language to campare the line utilization of each for various product types. The proposed algorithm can be implemented in existing FMSs for on-line control of product quantity using programmable logic controllers(PLC) and communication devices.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1888-1892
• /
• 2008

In this paper, a new parallel CMOS self-bias differential amplifier is designed to use in high-speed analog signal processing circuits. The designed parallel CMOS self-bias differential amplifier is developed by using internal biasing circuits and the complement gain stages which are parallel connected. And also, the parallel architecture of the designed parallel CMOS self-bias differential amplifier can improve the gain and gain-bandwidth product of the typical CMOS self-bias differential amplifier. With 1.8V $0.8{\mu}m$ CMOS process parameter, the results of HSPICE show that the designed parallel CMOS self-bias differential amplifier has a dc gain and a gain-bandwidth product of 64 dB and 49 MHz respectively.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.480-486
• /
• 2003

Due to rapid computerization of many consumer electric products, user interface of digital products comes an important issue for the user satisfaction. Although Menu Driven Interface are frequently employed for user interfaces on many digital products, there still exists many problems. This study attempts to apply to usability guideline digital camera through the review. And the study also an alternative devises design for digital product menu interface. The general type design guidelines include menu depth/breadth, information architecture, categorize and consistency among design components.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1793-1799
• /
• 2006

생산자 폐기 책임 규제 강화로 인하여, 제조업 영역이 제품 제조(BOL) 뿐만 아니라 사용, 보수(MOL)와 폐기(EOL)까지 확장 수명주기로 확대 되고 있다. 또한 EOL상에서 개별 제품에 대한 제품 복원 관리 시스템 (PRMS: Product Recovery Management System)에 관한 연구가 활발히 진행 되고 있다. 그러나 BOL, MOL과 EOL간의 정보 단절 문제, MOL상의 정보를 저장하고 사용할 수 없었던 문제는 EOL관리의 자동화를 저해한 큰 요인이다. 최근 유비쿼터스 기술의 발달로 개별 제품 추적이 가능해 졌지만, EOC 등의 식별부호(ID)만으로는 PRMS에 필요한 제품 정보를 얻을 수 없다. 본 논문에서는 제품 ID로부터 MOL상의 정보를 연결하고, 국제표준 기반 정보모델을 이용하는 PRMS를 개발한다. 이를 위해: (1) PRMS에 필요한 정보를 국제표준(ISO10303-239 등)을 기반으로 모델링하고, (2) 제품 ID를 통해 MOL상의 정보를 수집하여 제품 복원에 대한 의사결정을 수행할 수 있는 PRMS를 설계하고, (3) 시제품 구현을 통해 제안된 데이터 모델 및 시스템의 유효성을 검증한다.