• 제목/요약/키워드: processing speed

검색결과 4,313건 처리시간 0.04초

5456-H116 합금에 대한 마찰교반 용접과 마찰교반 프로세싱에 관한 연구 (Investigation on friction stir welding and friction stir processing for 5456-H116)

  • 김성종;박재철
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.242-243
    • /
    • 2009
  • Friction stir welding and friction stir processing is a new solid state processing technique for ioining and micro..structural modification in metallic materials. It has been applied not only joining for light metals but also modification of the microstructure to enhance mechanical properties. In thin study, we investigated the mechanical properties for applied friction stir welding and processing under various parameters such as probe diameter, probe type, traveling speed and rotating speed for 5456-H116 AI allov. As a result of experiments, optimum condition of friction stir welding is traveling speed of 15mm/min, rotating speed of 500RPM at 6mm diameter probe. Moreover, in the case of friction stir processing, the optimum condition is traveling speed of 15mm/min, rotating speed of 250RPM at full screw probe. As above mentioned, the mechanical characteristics enhanced with the decreasing of traveling speed and the increasing of friction areas because of plastic flow due to high friction heat. These result can be used as reference data for ship repairment.

  • PDF

CCSDS PN PROCESSING SPEED OPTIMIZATION

  • Ahn, Sang-Il;Kim, Tae-Hoon;Koo, In-Hoi
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.537-539
    • /
    • 2007
  • Telemetry processing system requires minimum bit transition level in data streams to maintain a bit synchronization while receiving telemetry signal. PN code has a capability of providing the bit transition and is widely used in the packet communication of CCSDS. CCSDS PN code that generator polynomial is $h(x)=x^{8}+x^{7}+x^{5}+x^{3}+1$, and the random bit sequence that is generated from this polynomial is repeated with the cycle of 255 bits. As the resolution of satellite image increases, the size and transmission rate of data increases. To process of huge and bulky size of satellite image, the speed of CCSDS PN Processing is very important. This paper introduces the way of improving the CCSDS PN Processing speed through processing 128 bits at one time using the feature of cyclic structure that repeats after first 255 bytes by grouping the random bit sequence with 1 byte and Intel Streaming SIMD Extensions 2. And this paper includes the comparison data of processing speed between SSE2-applied implementation and not-applied implementation, in addition, the measured value of speed improvement.

  • PDF

Development of an Image Processing Hardware for Detecting Defects on the surface of the High Speed Moving Plate

  • Sejeong Jang;Kwangsuck Boo;Jeonghoon Song;Lee, Seungyoung
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2002년도 ICCAS
    • /
    • pp.96.6-96
    • /
    • 2002
  • In this study an image processing system is designed and developed, which can detect and assort some defects on the surface of an object moving with high speed. For real time surface detection of high speed moving object, the fast processing should be managed and the image information including some surface features should be captured. It is difficult to acquire the noise free image due to various light sources and high speed moving materials under the environment of the general industrial site. In general, because pre-processing methods are employed for getting a noise free feature, the image processing speed has some limitation and the expensive image processing devices are required. This...

  • PDF

처리속도가 가변적인 작업들의 일괄처리 일정 계획 문제 (A Batch Processing Problem for Jobs with Variable Processing Sneed)

  • 오세호;이근부
    • 대한안전경영과학회지
    • /
    • 제8권4호
    • /
    • pp.195-204
    • /
    • 2006
  • This paper deals with a batch processor model in which the batch processing speed depends on the jobs assigned to the batch. Each job is completed by accomplishing its required job processing quantity which is calculated as job speed product processing time. Its speed is given as not the exact value but the range. Thus the batch sets are constructed by the jobs which hold the speed in common. And the batch sets are processed as soon as possible. We developed the model to described the problem situation and adopt the total tardiness as the decision criterion.

Improvement of Processing Speed for UAV Attitude Information Estimation Using ROI and Parallel Processing

  • Ha, Seok-Wun;Park, Myeong-Chul
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권1호
    • /
    • pp.155-161
    • /
    • 2021
  • 최근 UAV를 활용하는 정밀 추적이나 임무완수 등의 군사 목적의 연구가 활발하게 진행되고 있다. 특히 앞서가는 유도 UAV의 자세 정보를 추정하고 이 정보를 이용하여 임무 UAV가 스텔스로 따라가서 자신의 임무를 완수하는 기능이 필요한 경우에는 유도 UAV의 자세 정보 추정 속도를 실시간으로 처리 해야만 한다. 최근까지 영상처리와 칼만 필터를 사용해서 앞서가는 유도 UAV의 자세정보를 정밀하게 추정하는 연구가 수행되어 왔으나 처리과정의 순차처리로 인해 처리속도에 있어 문제점이 있어왔다. 따라서 본 연구에서는 영상 처리에 있어 처리영역을 전체영역이 아닌 물체를 포함하는 ROI 영역으로 한정하고 또한 연속적인 처리 과정을 OpenMP 기반의 멀티스레드로 분배하고 스레드동기를 맞추어서 병렬 형태로 처리함으로써 자세정보 추정 속도를 향상시킬 수 있는 방법을 제안한다. 구현 결과를 통해서 기본의 처리에 비해 45%이상 처리 속도를 향상시킴으로써 실시간처리가 가능하게 되어 임무 UAV의 추적 기능 향상을 통한 임무 완수 가능성을 증가시킬 수 있음을 확인하였다.

An Implementation of Pipelined Prallel Processing System for Multi-Access Memory System

  • Lee, Hyung;Cho, Hyeon-Koo;You, Dae-Sang;Park, Jong-Won
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.149-151
    • /
    • 2002
  • We had been developing the variety of parallel processing systems in order to improve the processing speed of visual media applications. These systems were using multi-access memory system(MAMS) as a parallel memory system, which provides the capability of the simultaneous accesses of image points in a line-segment with an arbitrary degree, which is required in many low-level image processing operations such as edge or line detection in a particular direction, and so on. But, the performance of these systems did not give a faithful speed because of asynchronous feature between MAMS and processing elements. To improve the processing speed of these systems, we have been investigated a pipelined parallel processing system using MAMS. Although the system is considered as being the single instruction multiple data(SIMD) type like the early developed systems, the performance of the system yielded about 2.5 times faster speed.

  • PDF

고속 처리를 위한 이진 영상 정규화 하드웨어의 설계 및 구현 (Design and Implementation of Binary Image Normalization Hardware for High Speed Processing)

  • 김형구;강선미;김덕진
    • 전자공학회논문지B
    • /
    • 제31B권5호
    • /
    • pp.162-167
    • /
    • 1994
  • The binary image normalization method in image processing can be used in several fields, Especially, its high speed processing method and its hardware implmentation is more useful, A normalization process of each character in character recognition requires a lot of processing time. Therefore, the research was done as a part of high speed process of OCR (optical character reader) implementation as a pipeline structure with host computer in hardware to give temporal parallism. For normalization process, general purpose CPU,MC68000, was used to implement it. As a result of experiment, the normalization speed of the hardware is sufficient to implement high speed OCR which the recognition speed is over 140 characters per second.

  • PDF

고속가공기를 이용한 CAD/CAM 포켓가공에 관한 연구 (A Study on CAD/CAM Pocket Processing using the High Speed Machine)

  • 류춘회;이육형;송준호
    • 한국기계가공학회지
    • /
    • 제3권3호
    • /
    • pp.32-38
    • /
    • 2004
  • Recently, the system of high speed milling(HSM) is widely used for reducing the operation time and maximizing efficiency of work. The most research of high speed milling system is still leaves much to be desired. Specially the research of mass pocket high speed processing with high precision is the first and probably the last. So this paper showed mass pocket processing of high precision with a duralumin and then confirmed a cause of inferior goods through the CAD/CAM pattern simulation and experimentation. And this paper showed high speed processing system reduce the rate of inferior from this optimal pattern.

  • PDF

Real Time Processing을 위한 Image Processing Unit의 설계 (Design of Image Processing Unit for Real Time Processing)

  • 김진욱;김석태
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 1998년도 추계종합학술대회
    • /
    • pp.194-197
    • /
    • 1998
  • Image Processing은 Image Data가 대량이고 내재된 정보가 병렬로 연관성을 가진다는 측면에서 실시간 처리가 용이하지 알다. 본 연구에서는 High Speed Real Time Image Processing을 위한 IPU(Image Processing Unit)와 이를 구동하기 위한 High Speed Real Time image Processing Language인 IPASM(Image Processing Assembly)을 제안한다. 우선 IPU의 기본개념을 설명하고 IPU의 구현을 위한 IPLU(Image Processing Logic Unit)를 설계한다. 그 후 Window98환경에서 구동 가능한 IPASM Interpreter를 실제로 제작하여 IPU의 동작방식을 간접적으로 진단한다.

  • PDF

고속 주축의 상태모니터링 및 제어 알고리즘 설계 (Design of High Speed Spindles Active Monitoring and Control Algorithm)

  • 최현진;박철우;배정섭;안정훈;최성대
    • 한국기계가공학회지
    • /
    • 제10권5호
    • /
    • pp.13-19
    • /
    • 2011
  • In this paper, the active monitoring and control system is developed. This system can monitor the status of high the speed spindle in real time during its processing, and can analyze its influence of dimensional accuracy and processing if any, and can control the machining condition to realize the machining system equipped with active monitoring and self-diagnostic features. Machining experiment was performed on 3 materials Al, Brass and S45C in order to derive the relation between active monitoring and control algorithm by the machining load. In addition, we measured surface roughness of processing specimen along with the data change of spindle rotating speed and conveying speed according to variation of machining load. Based on these experiments, we derived relations for each material that can be applied to the control algorithm to allow self control of the rotating speed and conveying speed according to the machining load.