References
- I.H. Kim, D.Y. Jang and D.C. Han, "A Study on Cutting Force Measurement Using a Cylindrical Capacitive Spindle Sensor", Transactions of the KSPE, Vol. 11, No. 2, pp. 17-23, 2002.
- Y.H. Lee, "Development of Autonomus Manufacturing System", Final Report, Kimm, pp. 76-186, 1996.
- D.C. Han, "Development of the in-process spindle and tool monitoring system during hard-turning", Final Report, Seoul National University, 2000.
- M.S. Hong, J.M. Kim, "A Study on the Cutting Force Simulation for Ball-end Milling Operation", Transactions of the KSMTE, Vol. 12, No. 6, pp. 84-91, 2003.
- I.H. Kim, D.Y. Jang and D.C. Han, "A Study on Cutting Force Measurement Using a Cylindrical Capacitive Spindle Sensor", Transactions of the KSPE, Vol. 11, No. 2, pp. 17-23, 2002.
- G. Byrne, D. Dornfeld, I. Inasaki, G. Ketteler, W. Konig and R. Teti, "Tool Condition Monitoring (TCM)-The Status of Research and Industrial Application", Annals of the CIRP, Vol. 44, pp. 541-567, 1995. https://doi.org/10.1016/S0007-8506(07)60503-4
- F. Klocke, R. Schmitz, Dr. A. Kirchheim and J. Stirnimann, "Advanced Machining Process Analysis", Industrial Tooling Conference, KISTLER, pp. 1-16, 2003.
- H.G. Kim, H.S. Yang and G.B. Lee, "Cutting Process Monitoring Using Tool Dynamometer in End-Milling Process", KSMTE Fall Conference, pp. 14-18, 2001.
- 지식경제부 생산시스템 전략기술지원단, "IT 부품가공용 유연성 머시닝센터", 전략기술 생산시스템 연구기획 최종보고서, pp. 37-48, 2008.
- 원시태, 허장희, 이영주, "볼 엔드밀 가공에서 고경도 강재의 절삭특성에 관한 연구", 한국소성 가공학회 금형가공 심포지엄, pp. 11-19, 2002.
- W.S. Yang, S.H. Lee, "A Study on a New Cutting Force Model Including Unbalance", Transactions of the KSMTE, Vol. 10, No. 1, pp. 59-64, 2001.
- "About MATLAB7.9.0(R2009b) User's Guide", 2009.
- M.C. Kang, J.S. Kim, D.W. Lee, K.Y. Lee and J.H. Kim, "Development of 3 - Component Tool Dynamometer for Evaluation of Machinability in High Speed Machining", Transactions of the KSPE, Vol. 16, No. 5, pp. 11-18, 1999.
- D.C. Han, "Development of the in-process spindle and tool monitoring system during hard-turning", Final Report, Seoul National University, 2000.
- M.S. Hong, J.M. Kim, "A Study on the Cutting Force Simulation for Ball-end Milling Operation", Transactions of the KSMTE, Vol. 12, No. 6, pp. 84-91, 2003.
- I.H. Kim, D.Y. Jang and D.C. Han, "A Study on Cutting Force Measurement Using a Cylindrical Capacitive Spindle Sensor", Transactions of the KSPE, Vol. 11, No. 2, pp. 17-23, 2002.