• 음성과학
• /
• 제10권2호
• /
• pp.45-55
• /
• 2003

Strange attractor can be used as a presentation method for signal processing. Fractal dimension is well known method that extract features from attractor. Even though the method provides powerful capabilities for speech processing, there is drawback which should be solved in advance. Normally, the size of the raw signal should be long enough for processing if we use the fractal dimension method. However, in the area of connected-digits problem, normally, syllable or semi-syllable based processing is applied. In this case, there is no evidence that we have sufficient data or not to extract characteristics of attractor. This paper discusses the relationship between the size of the signal data and the calculation result of fractal dimension, and also discusses the efficient way to be applied to connected-digit recognition.

• 전자공학회논문지 IE
• /
• 제45권2호
• /
• pp.20-27
• /
• 2008

본 논문에서는 TFT-LCD 편광필름의 결함을 검출하기 위한 새로운 영상처리기법을 제안한다. 레이저 반사광을 이용하여 획득한 편광필름 영상에서 우선 배경잡음을 제거하기 위하여 형태론적 영상처리기법(열림, 닫힘)을 사용한다. 배경잡음이 제거된 영상으로부터 결함을 검출하기 위하여 2차원 LMS 적응 예측기를 사용하여 밝은 결함을 검출하고 통계적 특성을 이용하여 어두운 결함을 검출한다. 산업현장에서 제공된 TFT-LCD 편광필름을 사용하여 제안된 기법의 성능을 평가한다.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.75-78
• /
• 2003

The paper deals with experimental results which was performed to investigate the characteristics of Korean lexical processing and representation of morphemes involved in Korean noun and verb Eojeols. The investigation is also related with the 'English past tense debate' which deals with human mental computation. Experiments using fMRI methods, show that Korean noun Eojeols and both regular and irregular verb Eojeols show a similar activation pattern. Thus, the results indicate that the morphological processing in Korean noun and verb Eojeols are performed quite differently than the Indo-European morphological processing.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.156-158
• /
• 2004

The microstructural evolution in a 304 stainless steel weld during FSW was examined. The SZ and TMAZ showed typical dynamically recrystallized and recovered microstructures, respectively, The microstructural observation revealed that sigma phase was formed at the advancing side of the stir zone. A possibility was suggested that the rapid formation of the sigma phase is related to the transformation of austenite to delta-ferrite in the stir zone, from introduction of high strain and dynamic recrystallization during FSW.

• 한국인지과학회:학술대회논문집
• /
• 한국인지과학회 2010년도 춘계학술대회
• /
• pp.13-17
• /
• 2010

Consciousness is really regarded as too ambiguous a concept to be understood and accepted as a mental construct without the inclusion of memory and attention in any conceptualization. However we need one criterion to count satisfactorily as an explanation of consciousness in information processing. An operational working definition of consciousness could be made in comparison of memory and attention: Consciousness would be a subjective awareness of momentary experience and also have the characteristics of an operating system performing control and consolidation information processing. This could be called a cognitive consciousness. It is possible that some distinctions between consciousness, memory and attention can be made conceptually and functionally from the perspectives of information processing.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.394-400
• /
• 2012

Due to the increasing demand for carious methodologies, the quality improvement of products were introduced. A brush, the most frequently used type of grinding process, is one of the deburring. In order to produce consistent burr shape, various machining conditions have been combined and applied to disk grinding process. By tool dynamometer, acoustic emission sensor and acceleration sensor depend on changes in processing conditions(depth of engagement, cutting speed, workpiece position, workpiece orientation, cutting time) signals were obtained for brush deburring grinding system. Root mean square obtained by processing the signal processing conditions by analyzing the characteristics of deburring is to derive the optimum conditions.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.384-386
• /
• 2005

Initial oxide layer on the butt surface fragments during friction stir welding (FSW) and then often remains as a faint zigzag-line pattern on the cross section. When remnant of the oxide layer often adversely affects the mechanical properties in the weld, it is called as 'kissing-bond'. The present study systematically examines effect of oxide array on bend property in the root of friction stir (FS) welded Al alloy 1050 by transmission electron microscopy (TEM), and then clarifies identity of the kissing-bond.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.84-89
• /
• 2014

This paper proposes the new multiple signal processing monitoring sensor for the marine installation. The recent marine technology is focused on underwater sensors and underwater sensor networks in order to measure, monitor, surveillance of and control of underwater environments. For these marine applications to be available, however, the provision of precise location information using monitoring sensor is essential. In this paper, the multiple signal processing circuit for obtaining the precise location information of marine installation sensor is developed and analyzed. The performance characteristics for obtaining the location information of marine installation sensor is analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the monitoring for the marine installation.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.137-150
• /
• 2011

Mobile ad hoc networks are expected to be widely used in the near future. However, they are susceptible to various security threats because of their inherent characteristics. Malicious flooding attacks are one of the fatal attacks on mobile ad hoc networks. These attacks can severely clog an entire network, as a result of clogging the victim node. If collaborative multiple attacks are conducted, it becomes more difficult to prevent. To defend against these attacks, we propose a novel defense mechanism in mobile ad hoc networks. The proposed scheme enhances the amount of legitimate packet processing at each node. The simulation results show that the proposed scheme also improves the end-to-end packet delivery ratio.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.406-411
• /
• 2003

This paper deals with the effect of laser material processing on the EMU production technique. Material processing with lasers takes advantage of all the characteristics of laser light. The high energy density and directionality achieved with lasers permits strong localized heat- or photo-treatment of materials with spatial resolution below one micrometer. The pulsed and mono-chromatic light allows the control of depth of heat treatment or selective excitation. The laser beam can be moved to process large areas, is a sterile tool and is no subject to wear and tear. Using laser processing have taken more interests in EMU production for improving the rigidity, weight reduction, crash durability, and cost savings so that their application to auto-bodies has been increased.