• Korean Journal of Computational Design and Engineering
• /
• v.11 no.2
• /
• pp.148-155
• /
• 2006

This paper presents a new method for assessing the efficiency of production process plans using tolerance chart to lower production cost. The tolerance chart is used to predict the accuracy of a part that is to be produced following the process plan, and to carry out the quantitative measurement on the efficiency of the process plan. By comparing the values of design tolerances and their corresponding resultant tolerances calculated using the tolerance chart, the process plan that is incapable of satisfying the design requirements and the faulty production operations can be identified. Similarly, the process plan that imposes unnecessarily high accuracy and wasteful production operations can also be identified. For the latter, a quantitative measure on the efficiency of the process plan is introduced. The higher the unnecessary cost of the production, the poor is the efficiency of the process plan. A coefficient is introduced for measuring the process plan efficiency. The coefficient also incorporates two weighting factors to reflect the difficulty of manufacturing operations and number of dimensional tolerances involved. To facilitate the identification of the machining operations and the machined surfaces, which are related to the unnecessarily tight resultant tolerances caused by the process plan, a rooted tree representation of the tolerance chart is introduced, and its use is demonstrated. An example is presented to illustrate the new method. This research introduces a new quantitative process plan evaluation method that may lead to the optimization of process plans.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.200-207
• /
• 2011

The research which sees accomplishes the capital region high-speed railway and examines investigates about process of railroad construction project and an advance service contents from to understand a progress process, change process and technical investigation of basic design and the execution plan at the time of route led and accomplishes the plan which is detailed the process which in the center researched. Also plan start method and application plan, clear the security of the plan air which is proper is necessary and dividing which design phase is, plan process construction etc. improvements sacrifice froze.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.4
• /
• pp.669-686
• /
• 1997

In this research, an object-oriented Petri net model for representing a flexible process plan is proposed, which is hierarchically multi-faceted for supporting planning, scheduling, and shop floor control functions. The multi-faceted process plan model consists of the following: a) an object model which represents on object-oriented data model, b) a static model which represents a process flow model with process alternatives, and c) a dynamic model which represents a process activity model with resources alternatives, of a flexible process plan. Petri nets allow the static and the dynamic process plan models to be represented in a unified formalism with an ease of model transformation. The multi-faceted process plan model suggested in this paper, is illustrated with a prismatic port in comprehensive detail.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.181-196
• /
• 1998

The aim of this research is the development of a CAPP system which can use the old experience of process planning to generate a process plan for a new part and learn from its own experience using the concept of stratified case-based reasoning(CBR). A process plan is determined through the hierarchical process planning procedure that is based on the hierarchical feature structure of a part. Each part and case have their own multiple abstractions that are determined by the feature structure of the part. Retrieving the case in stratified case-based process planning is accomplished by retrieving the abstraction that is most similar to the input part abstraction in each abstraction level of the case-base. A new process plan is made by the adaptation that translates the old case's process plan into the process plan of a new part. Operations, machines and tools, setups and operation sequence in each setup are determined in the adaptation of abstraction using some algorithms and the reasoning based on knowledge-base. By saving a new part and its process plan as a case, the system can use this new case in the future to generate a process plan of a similar part. That is, the system can learn its own experience of process planning. A new case is stored by adding the new abstractions that are required to save as the new abstraction to the existing abstractions in the case-base.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.235-242
• /
• 2008

This paper proposes a method for improving the process plan quality by use of dimensional tolerances. Dimensioning and tolerancing plays a key role in manufacturing process plan because the final part must ensure conformance with the dimensions and tolerances in its drawing. As a first step for the improvement of process plan quality, two resultant tolerances in design and process plan should be compared each other, and so a tolerance chart is used for acquisition and comparison of the two tolerances. In addition to two kinds of design and manufacturing tolerances, operational sequences or paths for the resultant dimension and tolerance are additionally recognized for measuring the quality of process plan quantitatively. Rooted tree is applied to find the related paths for the manufacturing resultant tolerances. A quality coefficient is defined by the components of two tolerances and their relations, the paths related to manufacturing resultant tolerances and the difficulty of an operation. In order to improve the quality of manufacturing process plan, the paths that two kinds of tolerances are the same or different in the rooted tree are recognized respectively and a method for tolerance rearrangement is developed. A procedure for improving the quality is suggested by combining the coefficient and the tolerance rearrangement method. A case study is applied to illustrate the efficiency of improvement method.

• Korean Management Science Review
• /
• v.14 no.2
• /
• pp.185-198
• /
• 1997

Business process reengineering(BPR) aims at a radical redesign of our business processes in order to achieve dramatic improvements in their performance. However, the fact that many BPR projects have failed hesitates the companies who have started to use BPR or who are planning to do so. Implementing a radical plan from a cross-functional perspective needs a more careful consideration of process vision, preventive measures and contigency plan. Our research suggests to use a visual decision making process (VDMP) in the development of a process vision and implementation plan. A BPR project of Carlaon School of Mnagement (CSOM) at the University of Minnesota is illustrated to show our suggested methodology.

• Korean Journal of Human Ecology
• /
• v.24 no.3
• /
• pp.451-461
• /
• 2015

It was the purpose of this study that propose architectural design process through analysis of concepts considering regional characteristics. The procedure of this study was as follows : First, classifying design process through investigating paper-survey and case studies. And We would investigate representation process of design concepts applied to design competitions entries. Finally, we would investigate design process applied to buildings in various districts. In the results, we could find that domestic architects were applying to site plan, floor plan, elevation plan, section plan and mass plan-led design process to express design concepts. And according to survey on buildings in various districts, we could verify that architects were applying various design process to express design concepts according to site characteristics. These results could help architects to design appropriately, according to site characteristics.

• IE interfaces
• /
• v.11 no.2
• /
• pp.159-176
• /
• 1998

In the motor manufacturing system with the properties of short delivery and order based production, the process plan is performed individually for each order by the expert of process plan after the completion of the detail design process to satisfy the specification to be required by customer. Also it is hard to establish the standard process plan in reality because part routings and operation times are varied for each order. Hence, the production planner has the problem that is hard to establish the production schedule releasing the job to the factory because there occurs the big difference between the real time to be completed the process plan and the time to be required by the production planner. In this paper, we study the decision supporting system for the process plan based on knowledge base concept. First, we represent the knowledge of process planner as a database model through the modified POI-Feature graph. Then we design and implement the decision supporting system imbedded in the heuristic algorithm in the client/server environment using the ORACLE relational database management system.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.7-15
• /
• 2018

Purpose: The life span of a hospital building is short. This is because the building will have to be built up due to the fact that it can not cope with the new medical environment, it can not be replaced due to low floor height, lack of land. The purpose of the hospital building master plan is to find a way to fulfill its role in the long term. Methods: Comparison the proposals submitted by the master plan and the proposals submitted by the hospitals, the case of three hospitals that have established a master plan for the past three years. In addition, interviews with the designers who participated in the design competition and the administrator of hospital about the variables that occurred during the business process. Results: The result of this study can be summarized into four points. The first one is that master plan is changed by administrator of hospital so that Thy need to understand about the role of master plan. And next is to protect reduction of the project cost. Third, continuous participation of master plan researchers in following projects is good to communicate with administrator and designer. The last one is empathy of master plan by designer and users. Implications: It is necessary to reduce changing of master plan in design process for sustainable managing of hospital.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.1124-1128
• /
• 2005

In this paper, a plan-coordination architecture is proposed for multi-agent control in the fractal manufacturing system (FrMS). A fractal in FrMS is a set of distributed agents whose goal can be achieved through cooperation, coordination, and negotiation with other agents. Since each agent in the FrMS generates, achieves, and modifies its own plan fragments autonomously during the coordination process with other agents, it is necessary to develop a systematic methodology for the achievement of global plan in the manufacturing system. The heterarchical structure of the FrMS provides a compromised plan-coordination approach, it compromise a centralized plan-generation/execution (which mainly focuses on the maximization of throughput) with a distributed one (which focuses on the autonomy of each module and flexibility of the whole system). Plan-coordinators in lower level fractal independently generate plan fragments according to the global plan of higher level fractal, and plan-coordinators in higher level fractal mediate/coordinate the plan fragments to enhance the global performance of the system. This paper assumes that generation method of the plan fragments and the negotiation policy of the fractal is achieved by a simple process, and we mainly focuses on the information exchanging and distributed decision making process to coordinate the combinations of plan fragments within a limited exchange of information.