• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.04a
• /
• pp.330-333
• /
• 2006

Many practical problems of quality control in service management are derived from the use of ordinal variables. Ordered linguistic variables differ from measurement variables. This paper presents a new control chart of a production process based on ordinal variables.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.7
• /
• pp.87-96
• /
• 2021

The purpose of this study is to analyze the problems of the Physical Activity Promotion System(PAPS) implemented in elementary, middle, and high schools in Korea and to prepare improvement measures. The data of the study was obtained through in-depth interviews, related papers, and press releases. The research participants of this study were 5 incumbent physical education teachers who directly instruct and measure PAPS at school and 5 college students who directly experienced PAPS. The results of the study are as follows. First, the problems that occurred in the educational environment of PAPS were students' indifference, teachers' passive guidance, and decreased physical education hours replaced by PAPS measurement days. Second, the problems occurring in the measurement environment of PAPS were errors due to measurement equipment, deviations due to different measurement locations, and differences in grades according to measurement items. Third, the problems that occur in the measurement process of PAPS are the lack of measurement personnel, the expedient physical fitness measurement, and the non-standardized measurement method. In order to improve these problems and successfully apply PAPS, the following improvement measures should be attempted. Details on this are as follows. First, teachers should inspire students' interest and interest in PAPS. Second, it is necessary to secure the reliability of the measurement result value of PAPS. Third, it is necessary to systematically supplement the school education system for PAPS measurement.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.228-239
• /
• 2013

Purpose: The objectives of this study were to develop an automated disinfectant dilution system, and an automated data management system for spraying amount for resolving uncertainty problem. Methods: Proper diluting rate was made by a controlled volume pump for liquid disinfectant and a screw conveyer pump for solid disinfectant. The water capacity of disinfecting system of 400 L was controlled by two water level sensors. The water quantity of water tank was controlled by the signals which were produced by the water level sensors. Signals were processed by Labview Programming, and ON/OFF of solenoid valve that was used for controlling water supplying to water tank, was controlled by SSR. The operating time of pumps for disinfectant was controlled quantitatively. A turbine flowmeter was used for development of automated measurement system for spraying amount of disinfectant. In order to save the flowmeter data and to control the spraying system, a multi-function data logger was used, and it was processed and saved in Excel file by a program developed in this study. Results: Labview 2010 was used for programming to control the automated measurement system for spraying amount of disinfectant. Results showed that the relationship between flowmeter value and time had a significant linear relationship such as 0.99 of $R^2$. Generally, 6.74 L/s of diluted disinfectant is sprayed for a vehicle passing through the disinfection system (about 15 seconds). Test results showed that average error between the measured spraying amount and the flowmeter data was 50 mL, and the range of error was 1.3%. Since the amount and time of spraying could be saved in real-time by using the spreadsheet files which could not be modified arbitrarily, it made possible to judge objectively whether the disinfection spraying was performed or not. Test results of spraying liquid and solid disinfectant showed that the errors between the measured discharge rate and the theoretical one were ranged within 3-4% for various dilution rates. Conclusions: The disinfection system developed would be working accurately. The automated spraying data base management system satisfied the purpose of this study. The automated dilution process system developed in this study could discharge liquid and solid disinfectant with accurate dilution rate, relatively.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.180-189
• /
• 2017

Pharmaceutical co-crystals primarily to improve the solubility as well as stability of insoluble drug are to be investigated more intensively for IMDs as US FDA has reclassified co-crystal as a special case of solvates in August this year. In this study, we proposed a mechanism of indomethacin-saccharin co-crystal formation and the creation of transient indomethacin meta-stable form using in-line monitoring tools with the addition rate of anti-solvent as a critical process parameter. Among various instruments, we combined PVM (particle vision measurement) and FBRM (focused beam reflectance measurement) for the in-line monitoring of anti-solvent co-crystallization process. The off-line characterization of resulting powders was carried out employing the PXRD (powder x-ray diffraction) and DSC (differential scanning calorimeter). It was observed that the pathway to the final IMC-SAC co-crystal was significantly dependent upon the anti-solvent addition rate. The process conditions to obtain high quality co-crystal powder effectively were established. Consequently, we concluded that in-line monitoring combing the PVM and FBRM should be useful for the in-line monitoring of pharmaceutical co-crystallization processes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.131-144
• /
• 2006

For the purpose of preparing the fundamental data on working environment of small scale manufacturing industries and preventing the occupational diseases of workers in these industries, authors surveyed the status of working environment to several chemical substances and physical agents by types of industry and types of process in the small scale manufacturing industries with less than five workers in Gimhae including 235 workplaces, 14 types of industry and 25 types of process from January 2002 to December 2004. This measurement method was work environment measurement method (established in Ministry of Labor, Korea), analytical methods (2nd Ed.) of Occupational Safety and Health Administration (OSHA) and manual of analytical methods (4th Ed.) of National Institute for Occupational Safety and Health (NIOSH) and collected data was analyzed by using SPSS 10.0 for windows, the results were as follows: 1. Noise generated in 14 types of industry and 22 types of process. an actual level of mean exposure (90.7 dB(A)) exceeded threshold limit values (TLVs) in manufacture of other transport equipment. An actual level of mean exposure (90.2dB) exceeded TLVs in the process of wire-drawing and 90.4dB in the process of wire-stranding. 2. Dusts of type I, II, III were generated in 9 types of industry and 8 types of process. Its mean concentration did not exceed TLVs. 3. Heavy metals (Pb, Mn, Cr, Ni) were generated in 7 types of industry and 7 types of process. Its mean concentration did not exceed TLVs. 4. 16 kinds of organic solvents were generated in 11 types of industry and 6 types of process. Its mean concentration did not exceed TLVs. As the above results, chemical substances and physical agents were generated in the several different types of industry and process of the manufacturing industry with less than five workers, and only mean level of noise was exceeded TLVs. In case of exceeding threshold limit values, improvement of work environment is actively needed, and work environment management should be performed continuously for prevention of an occupational diseases and work related diseases.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.44-55
• /
• 2017

Many enterprises have recently been pursuing process innovation or improvement to attain their performance goal. To comprehensively support business process execution, the concept of business process management (BPM) has been widely adopted. A life cycle of BPM is composed of process diagnosis, (re)design, and enactment. For aligning with enterprise strategies, all BPM activities must be closely related to performance metrics because the metrics are the drivers and evaluators of business process operations. The objective of this paper is to propose a life cycle-based BPM framework integrated with the process-based performance measurement model, in which business processes are systematically interrelated with key performance indicators (KPIs) during an entire BPM life cycle. By using the proposed BPM framework, company practitioners involved in process innovation projects can easily and efficiently find the most influencing processes upon enterprise performance in the process diagnosis phase, evaluate the performance of newly designed process in the process (re)design phase, monitor the KPIs of new business process, and adjust business process activities in the process execution phase through the BPM life cycle.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2473-2478
• /
• 2013

The recently developed military system adopts System Engineering for quality insurance. The process of military system's development basically adopts specification(MIL-STD-499) and system engineering(ISO/IEC 15288) that was developed by America. Recently the level of company's capability maturity is granted by measurement and assessment for the level of CMM or CMMI that was developed by Carnegie Mellon University. This article introduces adopted range of process that developed military system adopted additional process of CMMI. This article writes a merit of process for military system's output that is developing device adopted diverse process.

• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.116-122
• /
• 2014

Assessment of setting process of concrete is important as it provides useful information to schedule concreting work in construction site. Electrical impedance measurement method, which utilizes the change of electrical resistance of concrete, has been applied to assess setting process of cement-based materials. However, the applicability of the method has been demonstrated only for cement paste and mortar. The main purpose of this research is to develop the electrical impedance based setting process assessment for concrete. To this end, electrical impedance response model for concrete should be developed in advance since it is essential to estimate the electrical resistance of concrete from measured impedance response. The electrical resistance of concrete is a key parameter for the setting process assessment. In this study electrical impedance responses of the concrete in setting process are measured and analyzed. Thereby, an electrical impedance response model of the liquid state concrete is developed and schematically validated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.4 s.247
• /
• pp.381-388
• /
• 2006

The objective of this study is to predict the etching characteristics using spray characteristics for the optimization on the etching process of Lead-Frame. The etching characteristics such as etching factor, uniformity were investigated on the actual operating conditions. The correlation between the etching characteristics and the spray ones obtained by measurement were analyzed to simulate the etching characteristics according to actual conditions of lead-frame etching process. These conditions of lead-frame process were spray pressure, distance from nozzle tip to substrate, pipe pitch, and nozzle pitch. To improve the etching characteristics in the lead-frame process, effects of the various operating conditions should be understood in detail. The spray characteristics obtained by experiment using PDA system were simulated by the Monte-Carlo method. The etching process model was coded by Java language. It was found that simulation results generally agreed well with the measured results of etching characteristics in lead-frame etching process. The optimal operating parameters were successfully found under variable conditions.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.36-41
• /
• 2020

Recently, due to the development of MEMS technology, researches for the production of effective micro structures and shapes have been actively conducted. However, the process technology based on chemical etching has a number of problems such as environmental pollution and time problems due to multi-process. Various processes to cope with this process are being studied, and one of the mechanical etching processes is the powder blasting process. This process is a method of spraying fine particles, which has the advantage of being an effective process in manufacturing hard brittle materials. However, it is also a process that adversely affects the material surface roughness and material properties due to the impact of the injection of fine particles. In this study, after fabricating micro-channels in fused silica glass with excellent optical properties among the hard brittle materials, we used the nano indentation system to analyze the micro parts using nano-particles as well as machinability and surface roughness analysis of the processed surface. The analysis was performed for the effective processing of powder blasting.