• Korean Journal of Community Nutrition
• /
• v.8 no.5
• /
• pp.744-754
• /
• 2003

At present, health care industries throughout the world are struggling with the challenges to set up financial structures as cost-effective ways and means of satisfying customer needs for health care services. Many hospitals consign foodservice management to foodservice companies for the purpose of efficiency. The companies taking charge of hospital foodservice are also striving to gain an advantage over keen competitions. This study applied Quality Function Deployment(QFD) to one hospital (which will be shown as $\ulcorner$A hospital$\lrcorner$ below) managed by a contract foodservice company for the purpose of strategy planning to provide sustainable competitive advantage. First of all, this study scanned internal and external environment of $\ulcorner$A hospital$\lrcorner$ by means of a Quality Measurement Tool and a fieldwork study. With the result of environment scanning, this study elicited 20 strategies through SWOT analysis, which were categorized by 4 perspectives such as financial, customer, internal process, learning and growth perspectives. Finally, the priorities of 20 strategies were extracted from QFD methodology. According to the results obtained by applying QFD to $\ulcorner$A hospital$\lrcorner$'s foodservice, the strategies which $\ulcorner$A hospital$\lrcorner$ foodservice was obliged to introduce and implement were : the specialization of Children's hospital foodservice, scientific foodservice management through the standardization of foodservice operations, the maintenance of sanitary quality through sanitary system, the remodeling of facilities, the introduction of new equipment, the prompt and accurate response to customer needs, the development of appropriate patient menus, the provision of competitively priced meals for patient selection, the development of a demand forecast model by considering the characteristics of a children's hospital, improvement of productivity and the reduction of labor costs through the employment of experienced employees based on their seniority.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.26 no.2
• /
• pp.241-268
• /
• 2015

Since 2008, the Presidential Committee on Library and Information has conducted 'National Library Management Evaluation,' and almost all of the public libraries have participated in the evaluation. In order to find the effect of the Evaluation on the public libraries, this study analyzed four years of the performance scores (2010~2013) during the period of the $1^{st}$ National Library Development Plan 2009~2013, which used the same measurement, were analyzed by the size groups and regions. The results indicated positive effect on the quality of the internal process such as planning and collection building. Yet attainment gab remains between metropolitan and the other regions, and also different relationship exists between input and attainment among the public library size groups. It suggested the policy development considering the library size and the regional difference.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.273-280
• /
• 2017

As massive integration technology of transistors has been developing, multi-core circuit is fabricated on a silicon chip and a clock frequency is getting faster to meet the system requirement. But increasing the clock frequency can induce some problems to violate the operation of system such as clock synchronization, so it is very import to avoid metastability events to design digital chips. In this paper, metastability windows are measured by bisection method in H-spice depending on temperature, supply voltage, and the size of transmission gate with D-FF designed with 180nm CMOS process. The simulation results show that the metastability window(: MW) is slightly increasing to temperature and supply voltage, but is quadratic to the area of a transmission gate, and the best area ration of P and Ntransitor in transmission gate is P/N=4/2 to get the least MW.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.1
• /
• pp.61-68
• /
• 2017

Electrochemical conversion of $CO_2$ and production of $H_2$ were attempted on a three-dimensionally ordered, porous metal organic framework (MOF-74) in which transition metals (Co, Ni, and Zn) were impregnated. A lab-scale proton exchange membrane-based electrolyzer was fabricated and used for the reduction of $CO_2$. Real-time gas chromatography enabled the instantaneous measurement of the amount of carbon monoxide and hydrogen produced. Comprehensive calculations, based on electrochemical measurements and gaseous product analysis, presented a time-dependent selectivity of the produced gases. M-MOF-74 samples with different central metals were successfully obtained because of the simple synthetic process. It was revealed that Co- and Ni-MOF-74 selectively produce hydrogen gas, while Zn-MOF-74 successfully generates a mixture of carbon monoxide and hydrogen. The results indicated that M-MOF-74 can be used as an electrocatalyst to selectively convert $CO_2$ into useful chemicals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.208-216
• /
• 2002

In this paper, the design method of a waveguide broad-wall longitudinal slot array monopulse antenna of X-type monopulse axes is presented, and the method is verified through manufacture and measurement. In the antenna design of this paper, the antenna size is small and the monopulse axes are X-type. Thus, the common continuous aperture distribution fuction is not suitable and the power balance among antenna quadrants should be considered. Also, since the waveguide height is reduced into 0.1 wavelength, the modelling of the slot characteristics is not simple. Thus, in this paper, the aperture distribution is optimized by using random number, and the balance among the quadrants is achieved by applying the quadrant weighting factor during the aperture optimization process. Also, the moment method procedure is accelerated by applying the interpolation technique to some part of the moment matrix, and the moment method procedure is added to the array synthesis program as a subroutine so that the slot characteristics can be calculated directly when it is required. Based on this method, a antenna of 28dBi is designed and manufactured. It is found that the antenna characteristics is similar to design data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.6
• /
• pp.505-508
• /
• 2017

This paper analyzes the effect of metal dummy structures in CMOS on antenna performances of a sub-terahertz on-chip microstrip patch antenna. A 400-GHz on-chip antenna is designed in a 45-nm CMOS process, and the resonance frequency and efficiency of the antenna are analyzed depending on the density of metal dummy structures. Antennas integrated with an oscillator are designed and fabricated for verification, and measurements are performed using quasi-optical methods with an FTIR and bolometer. The measurement results shows that the radiated power drops from 420 nW to 90 nW by 6.8 dB due to the dummy structures with the density of 27 %.

• Journal of Radiation Protection and Research
• /
• v.30 no.4
• /
• pp.231-236
• /
• 2005

Dosimeters are manufactured from same process in the manufacturer but the deviation of TL raw counts exists among the dosimeters. TL raw counts are also gradually degrade due to multiple readings and physical abuse. ECF (Element Correction Factor) correct the degradation and deviation of TL raw counts to the average TL raw counts of reference dosimeters. Procedures for producing ECF of thermoluminescent dosimeters were described In detail. ECFs of 319 reference, control and field dosimeters were measured three times and average of three ECF values was calculated. Also, % CV(Coefficient of Variation) of three ECF values was calculated to verify ECF. ECF & % CV distributions for the field and control dosimeters are presented. TL raw counts of field dosimeters, being used about 6 times for the past 3 years, were almost unchanged, but those of control dosimeters being used more frequently, were degraded about 4.7 %.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.161-170
• /
• 2014

Making jungkwa, a traditional Korean snack, is difficult and complicated. In this study, a rice cooker was used to simplify the process of making jungkwa made with ginseng. Comparing ginseng jungkwa cooked in a rice cooker with the control group cooked in a traditional way, their chewiness, browness, glossy and overall preference were similar when cooked for 160 minutes, 175 minutes, 190 minutes, 205 minutes, and 220 minutes. The moisture content of ginseng jungkwa cooked in a rice cooker decreased, while its sugar content increased with increased cooking time. Also, the ginseng jungkwa had lower lightness and higher redness and yellowness as its cooking time got longer. The ginseng jungkwa cooked for 205 minutes was most similar to the one cooked in a traditional way. In the measurement of texture, the ginseng jungkwa had higher hardness with increased cooking time, and, when cooked for 205 minutes, it was most similar to the one cooked in a traditional way in chewiness. The sensory evaluation showed that the one cooked for 205 minutes was most preferred in appearance, smell, taste, texture and overall preference. Based on these results, this study revealed that using a rice cooker can be substituted for the traditional way of making jungkwa.

• Journal of the Korean Ceramic Society
• /
• v.55 no.1
• /
• pp.55-60
• /
• 2018

In this study, quantum dots composed of $Mn^{2+}$ doped ZnS core and ZnS shell were synthesized using MPA precursor at room temperature. The ZnS: Mn/ZnS quantum dots were prepared by varying the content of MPA in the synthesis of ZnS shells. XRD, Photo-Luminescence (PL), XPS and TEM were used to characterize the properties of the ZnS: Mn/ZnS quantum dots. As a result of PL measurement using UV excitation light at 365 nm, the PL intensity was found to greatly increase when MPA was added at 15 ml, compared to the case with no MPA; the PL peaks shifted from 603 nm to 598 nm. A UV sensor was fabricated by using a sputtering process to form a Pt pattern and placing a QD on the Pt pattern. To verify the characteristics of the sensor, we measured the electrical properties via irradiation with UV, Red, Green, and Blue light. As a result, there were no reactions for the R, G, and B light, but an energy of 3.39 eV was produced with UV light irradiation. For the sensor using ZnS: Mn/ZnS quantum dots, the maximum current (A) value decreased from $4.00{\times}10^{-11}$ A to $2.62{\times}10^{-12}$ A with increasing of the MPA content. As the MPA content increases, the PL intensity improves but the electrical current value dropped because of the electron confinement effect of the core-shell.

• Preventive Nutrition and Food Science
• /
• v.7 no.1
• /
• pp.67-71
• /
• 2002

Capsaicin (trans-8-methyl-N-vanillyl-6-nonenarnide), a major pungent component of hot pepper, is known to exert antioxidative properties. In this study, we investigated the protective effects of capsaicin against chemical carcinogen-induced oxidative damage in rats. Male Sprague Dawley rats weighting 230~250 g were treated with chemical carcinogens such as 2-nitropropane (2NP) or n-methyl-N'-nitro-N-nitrosoguanidine (MNNG) after (or before) the administration of capsaicin at doses of 0.5, 1,5 mg/kg. The level of lipid peroxidation in rat liver was estimated by measuring the amounts of thiobarbituric acid reactive substances. The degree of oxidative DNA damage was evacuated by measuring a DNA adduct, 8-hydroxydeoxyguanosine (8-OHdG), in urine. Antioxidative activities of capsaicin and its metabolites in vitro were determined by the measurement of DPPH (1,1-diphenyl-2-picrylhydrazyl), a radical quencher. Significant inhibition of 2-NP induced lipid peroxidation was observed in the liver of the rat when treated with capsaicin. MNNG-induced urinary excretion of 8-OHdG was decreased by capsaicin treatment. Capsaicin and its metabolites inhibited net only the formation of free radicals, but also lipid peroxidation in vitro. Our results show that capsaicin may function as a free radical scavenger against chemical carcinogen-induced oxidative cellular damage in vivo. The observed antioxidative activities of capsaicin may play an important role in the process of chemoprevention.