• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.77-88
• /
• 2019

One way of appling 3D printing to garments is through the combination of 3D polymer filaments in textile fabrics. it is essential to understand the interface between the polymer and the 3D composite fabric in order to enhance the adhesion strength between the polymers and the peeling strength between the fabric and the polymer. In this study, the adhesion of composite printed specimens using a combination of fabric and polymers for 3D printing was investigated, and also the change in adhesion was investigated after the composite fabric printed with polymers was subjected to constant pressure. Through this process, the aims to help develop and utilize 3D printing textures by providing basic data to enhance durability of 3D printing composite fabrics. The measure of the peeling strength of the composite fabric prepared by printing on a fabric using PLA, TPU, Nylon polymer was obtained as follows; TPU polymer for 3D printing showed significantly higher peel strength than polymers of composite fabric using PLA and Nylon polymer. In the case of TPU polymer, the adhesive was crosslinked because of the reaction between polyurethane and water on the surface of the fabric, thus increasing the adhesion. It could be observed that the adhesion between the polymer and the fiber is determined more by the mechanical effect rather than by its chemical composition. To achieve efficient bonding of the fibers, it is possible to modify the fiber surface mechanically and chemically, and consider the deposition process in terms of temperature, pressure and build density.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.543-549
• /
• 2018

In this study, the treatment efficiency of inorganic membrane according to the flux that blending raw water was investigated at the laboratory level. Based on the results of each blending and flux, we obtained the best efficiency according to each measurement item. The treatment efficiencies were different depending on the raw water and treatment amount of the treated water. Especially, turbidity removal efficiency was high. In the case of $UV_{254}$, the removal efficiency according to the concentration of the raw water and the removal efficiency according to the flux of the treated water showed a maximum of 69 % to minimum of 48 %. In the case of TOC and DOC, the processing efficiency was 22 % and 28 %, respectively, because the organic value of the raw water was low. These results suggest that there is an optimal process to effectively remove contaminants from the inorganic membrane process, and it is necessary to optimize it according to operating conditions.

• Journal of Digital Convergence
• /
• v.19 no.8
• /
• pp.43-48
• /
• 2021

There are prior studies that describe in detail the classification and shape of 26 species of Korean flounder, but it is difficult to make them out and they are used interchangeably or misused. It is intended to present the taxonomic standards of Pleuronichthys cornutus and Pleuronichthys japonicus and use them as tourism education materials using aquatic resources. Morphological comparison was made through counting and measurement. The two fish species were generally flattened in an oval shape with a low body height and a wide body width, and the anal fin developed and sized similar to the dorsal fin, and the caudal fin was widely spread out. Among the hyoid bones, in three parts of the coccyx, the main part, the ischial part, and the cardinal process, there were differences in the degree of curvature, the open angle, and the shape of the ischial part and the lateral process, which corresponded to the representative classification characteristics. In addition, it will be expected that it will serve as a basis as a fishery and marine education material for marine tourism that classifies and categorizes the characteristics as a genus of flounder and categorizes the characteristics, and reduces misuse of scientific names and names in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1037-1043
• /
• 2020

This paper presents a new Physical Unclonable Function (PUF) security chip based on a low-cost, small-area, and low-power semiconductor process for IoT devices. The proposed security circuit has multiple challenge-to-response pairs (CRP) by adding the switching circuit to the cross-coupled path between two inverters of the SRAM structure and applying the challenge input. As a result, the proposed structure has multiple CRPs while maintaining the advantages of fast operating speed and small area per bit of the conventional SRAM based PUF security chip. In order to verify the performance, the proposed switched SRAM based PUF security chip with a core area of 0.095㎟ was implemented in a 180nm CMOS process. The measurement results of the implemented PUF show 4096-bit number of CRPs, intra-chip Hamming Distance (HD) of 0, and inter-chip HD of 0.4052.

• Journal of Marine Bioscience and Biotechnology
• /
• v.12 no.2
• /
• pp.81-90
• /
• 2020

Sialic acid, which is contained in about 60-160 mg/kg in the edible bird's nest (EBN), is known to facilitate in the proper formation of synapses and improve memory function. The objective of this study is to extract effectively the sialic acid from edible bird's nest using affinity bead technology (ABT). After preparing the non-polar polymeric bead "KJM-278-28A" having a porous network structure, and then desorbed sialic acid was concentrated and dried. The analysis of the physicochemical properties of bead "KJM-278-28A" showed that the particle size was 400-700 ㎛, the moisture holding capacity was 67-70%, the surface area (BET) was 705-900 ㎡/g, and the average pore diameter 70-87 Å. The adsorption capacity of the bead "KJM-278-28A" for sialic acid was shown a strong physical force to bind sialic acid to the bead surface of 400 mg/L. In addition, as a result of analyzing the adsorption and desorption effects of sialic acid on water, ethanol, and 10% ethanol on the bead, it was confirmed that desorption effectively occurs from the beads when only ethanol is used. As a result of HPLC measurement of the separated sialic acid solution, a total of four sialic acid peaks of N-acetyl-neuraminic acid (Neu5Ac), α,β-anomer of Neu5Ac and N-glycoly-neuraminic acid were identified. Through these results, it was confirmed that it is possible to separate sialic acid from EBN extract with efficient and high yield when using ABT.

• Journal of Korean Academy of Nursing
• /
• v.51 no.3
• /
• pp.363-379
• /
• 2021

Purpose: The purpose of this study was to evaluate the validity and reliability of the Korean version of Person-Centered Practice Inventory-Staff (PCPI-S) for nurses. Methods: The English PCPI-S was translated into Korean with forward and backward translation. Data were collected from 338 nurses at one general hospital in Korea. Construct validity was evaluated with confirmatory factor analysis, convergent validity, and discriminant validity. Known-group validity was also evaluated. Cronbach's α was used to assess the reliability. Results: The PCPI-S Korean version consisted of 51 items in three areas: prerequisites, the care environment, and person-centered process. The comparative fit index (CFI) and values of person-centered care process were improved after engagement and having sympathetic presence items were combined as one component. The construct validity of PCPI-S Korean version was verified using four-factor structures (.05 < RMSEA < .10, AGFI > .70, CFI > .70, and AIC). The convergent validity and discriminant validity of the entire PCPI-S question were verified using a two-factor structures (AVE > .50, construct reliability > .70). There was an acceptable known-group validity with a significant correlation between the PCPI-S level and the degree of person-centered care awareness and education. Internal consistency was reliable with Cronbach's α .95. Conclusion: The Korean version of PCPI-S is valid and reliable. It can be used as a standardized Korean version of person-centered care measurement tool. Abbreviation: RMSEA = root mean square error of approximation; AGFI = adjusted goodness of fit index; AIC = Akaike information criterion; AVE = average variance extracted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1384-1390
• /
• 2019

This paper proposes a technological solution for improving the recognition direction of target objects for automatic vision inspection by machine vision. This paper proposes a technological solution for improving the recognition direction of target objects for automatic vision inspection by machine vision. This enables the automatic machine vision inspection to detect the image of the inspection object regardless of the position and orientation of the object, eliminating the need for a separate inspection jig and improving the automation level of the inspection process. This study develops the technology and method that can be applied to the wire harness manufacturing process as the inspection object and present the result of real system. The results of the system implementation was evaluated by the accredited institution. This includes successful measurement in the accuracy, detection recognition, reproducibility and positioning success rate, and achievement the goal in ten kinds of color discrimination ability, inspection time within one second and four automatic mode setting, etc.

• Corrosion Science and Technology
• /
• v.20 no.6
• /
• pp.426-434
• /
• 2021

The effect of two different annealing temperatures on the level of the second phase precipitated in the microstructure and the corrosion behaviors of super austenitic stainless steel were examined. The sample annealed at a higher temperature had a significantly lower fraction of the sigma phase enriched with Cr and Mo elements, showing more stable passivity behavior during the potentiodynamic polarization measurement. However, after the welding process with Inconel-type welding material, severe corrosion damage along the interface between the base metal and the weld metal was observed regardless of the annealing temperature. This was closely associated with the precipitation of the fine sigma phase with a high Mo concentration in the unmixed zone (UMZ) during the welding process, leading to the local depletion of Mo concentrations around the sigma phase. On the other hand, the fraction of the newly precipitated fine sigma phase in the UMZ was greatly reduced by post-weld heat treatment (PWHT), and the corrosion resistance was greatly improved. Based on the results, it is proposed that the alloy composition of welding materials and PWHT conditions should be further optimized to ensure the superior corrosion resistance of welded super austenitic stainless steel.

• Journal of Environmental Science International
• /
• v.31 no.4
• /
• pp.365-368
• /
• 2022

The purpose of this study was to investigate the effects of desensitization and flooding on the behavior of dogs during grooming, focusing on their response to the sound and skin stimulation while using a clipper. A total of 20 adult dogs over two years of age with complete personality formation were included in the study. Ten dogs, of which three were Bichons (average weight 5 kg), four were Poodles (average weight 5 kg), and three were Malteses (average weight 4 kg), were subjected to the desensitization process. The remaining 10 adult dogs were subjected to the flooding experiment, and were of the same breed and average weight as the adult dogs used in the desensitization process. The desensitization and the flooding were performed three times a day (approximately 1 min per session) for 10 days. For desensitization, statistical significance was observed only on the fifth day, when compared by breed (p<0.05). Overall, when compared by measurement day, the results of desensitization for Bichon, Poodle and Maltese dogs were statistically significant (p<0.05). The results for the Bichon, Poodle, and Maltese dogs that were subjected to flooding were found to be statistically significant (p<0.05). There was a significant difference in the results of the flooding on the second and ninth days (p<0.05); however, flooding had no effect on the other days (p>0.05). Desensitization using the clipper, a beauty tool, was faster than flooding in achieving stabilization. In conclusion, desensitization and flooding showed positive results on the stress relief and emotions of dogs during grooming, with respect to cosmetic fear response.

• Journal of Internet of Things and Convergence
• /
• v.8 no.2
• /
• pp.49-54
• /
• 2022

Immersive contents is content that provides a realistic experience by maximizing the user's five senses, and includes virtual reality, augmented reality, and mixed reality. In order to provide a sense of reality to users in immersive content, it is necessary to provide realistic visual images, hearing, and touch. However, due to the rapid change in the environment for developing immersive content, experts in training human resources are having difficulties in designing the curriculum. In this study, we propose a series of educational courses that use drones to acquire and process real-world measurement data and apply the derived data to VR, AR, and MR to help experts in training immersive content develop talent. The design of training process composes through demand survey and analysis of companies, students, and local communities. This study can be a useful resource for education experts who want to train immersive contents manpower.