• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.55-63
• /
• 2017

Due to spatial problems and system size,conventional measurement methods used to acquire the information needed for existing electrical energy and management have been limited to new buildings or areas where replacement is possible. This electric load management method is problematic when applying it to energy and safety management of vulnerable areas or existing homes or offices. The problem with installing a measurement module in every branch is that the system is too large. Even if the measurement module is installed, the type of load is not recognized, and efficient management is not performed. In particular, it is very difficult to apply it to traditional markets and backward facilities in Korea. In this paper, we apply NIALM technology and arc detection technology to solve these problems and verify the feasibility of NIALM for normal arc generation. Also, based on the verification results, we propose a new smart home safety management system that can effectively manage electrical safety and that can be applied to conventional market and existing home safety management systems. The proposed system conducts a comparative performance test with an existing safety management system. In addition, it achieves 95% or more load recognition for four loads, which is impossible in 40% of the existing systems, and the arc detection function was confirmed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.301-315
• /
• 2010

Recently, competition between companies has intensified and so has the necessity of creating a new business value inventions has increased. A numbers of Business organizations are beginning to realize the importance of business process management. Processes however can often not go the way they were initially designed or non-efficient performance process model could be designed. This can be due to a lack of cooperation and understanding between business analysts and system developers. To solve this problem, business process mining which can be used as the basis of the business process re-engineering has been recognized to an important concept. Current process mining research has only focused their attention on extracting workflow-based process model from competed process logs. Thus there have a limitations in expressing various forms of business processes. The disadvantage in this method is process discovering time and log scanning time in itself take a considerable amount of time. This is due to the re-scanning of the process logs with each new update. In this paper, we will presents a modified FP-Tree algorithm for FP-Tree based business processes, which are used for association analysis in data mining. Our modified algorithm supports the discovery of the appropriate level of process model according to the user's need without re-scanning the entire process logs during updated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.609-616
• /
• 2017

In this paper, we propose an algorithm to obtain more stable and high recognition rate by using left and right rotation information of input image in order to obtain a stable recognition rate in face recognition. The proposed algorithm uses the facial image as the input information in the web camera environment to reduce the size of the image and normalize the information about the brightness and color to obtain the improved recognition rate. We apply Principal Component Analysis (PCA) to the detected candidate regions to obtain feature vectors and classify faces. Also, In order to reduce the error rate range of the recognition rate, a set of data with the left and right $45^{\circ}$ rotation information is constructed considering the directionality of the input face image, and each feature vector is obtained with PCA. In order to obtain a stable recognition rate with the obtained feature vector, it is after scattered in the eigenspace and the final face is recognized by comparing euclidean distant distances to each feature. The PCA-based feature vector is low-dimensional data, but there is no problem in expressing the face, and the recognition speed can be fast because of the small amount of calculation. The method proposed in this paper can improve the safety and accuracy of recognition and recognition rate faster than other algorithms, and can be used for real-time recognition system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.608-614
• /
• 2018

In addition to the diffusion of ICT technology, various protocols of short range wireless communication technology are being applied for efficient information operation. However, due to limitations of short-range wireless communication, communication is not smooth in places where frequency environment is poor, such as frequency confusion and warehouse type factory. When an alternative is needed. The development of LED technology and expansion of infrastructure through LED based visible light communication is attracting attention as an alternative and spreading the usage in wide range now a days. In addition, the infrastructure has been expanded with solar panels in response to the development of smarthome built-in with renewable energy. In this situation, visible light communication using PD has been limitedly applied in a near environment where the receiving angle of the PD and the ambient light ensure the LoS and the influence of the ambient light is small. In order to solve this problem, we have implemented visible light communication using LED lighting with large current infrastructure and solar panel with large receiving area, and proposed a circuit for restoring accurate data even in ambient light. Through this study results, it is expected that visible light communication can be more widely used and this result used as the base data for visible light communication research using the solar panel as the receiver.

• Journal of Intelligence and Information Systems
• /
• v.18 no.1
• /
• pp.71-90
• /
• 2012

Although it has been studied for a long time in various disciplines, most of control theories remain being developed by analyzing relatively simple tasks. Even recent research on control of information systems development explains only a small part of control phenomena observed in the real world projects. This research focuses on identifying and analyzing the concepts and structures in order to make them useful for understanding and explaining control of information systems development comprehensively This investigation utilizes the complementary relationship between views on control from organizational and economic perspectives. A conceptual framework developed by integrating previous research on control allows us to analyze the development of information systems for control purposes. The results of discussion about control mechanisms and network can be used as guidelines for designing control systems in real projects. Analysis of control networks shows that control of development projects requires quite complex networks intertwining a variety of controllers and controlees. The results of this research are expected to contribute to correcting the unbalanced status of IS research which has emphasized too heavily on planning and implementation, and deepening and widening our understanding about controlling development projects. Practitioners can use the results as guidelines for designing control mechanisms and networks, and get alerted by them about the agency risks inherent in outsourced developments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.709-716
• /
• 2016

Recently, the operating conditions of the various mechanical structures have become more severe and the running time has become longer as the development of plant equipment increases with the introduction of high technology. Thus, the reliability of the system and its accessories is becoming a problem. Normally, synthetic natural gas (SNG) plants use 1.25Cr-0.5Mo or 2.25Cr-1Mo heat resistant steel according to the operating conditions. In this study, a lab-scale reactor was set up using 1.25Cr-0.5Mo steel, in order to carry out corrosion tests for producing synthetic natural gas. The corrosive characteristics were investigated under 1st-methanator operating conditions and fundamental data about the durability and reliability were obtained by using the experimental test. The analysis of results obtained on the durability of the reactor under emission and injection compositions showed that the hydrogen embrittlement caused by hydrogen and the oxidation corrosion caused by H2O had the most effect on the durability of 1.25Cr-0.5Mo steel in the SNG reactor. However, the hydrogen embrittlement and oxidation corrosion occurred simultaneously under emission conditions, so that the corrosion of the material increased suddenly after a long operating time. Besides, the corrosion of the 1.25Cr-0.5Mo steel under the injection composition was faster than that under the emission composition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4560-4571
• /
• 2013

Current global issue of climate change is growing and greenhouse gases occur in most cities. To solve the problem of climate change, the city should be changed to low-carbon structure. Low-carbon city planning is a step-by-step plan from the initial establishment, from design and operation of urban structure, to maintenance and management should be considered as an integrated whole process. Under this background, this study evaluated the whole process of low-carbon urban planning ways. For this step, divided into three steps and eight divisions, 30 sub-indicators are derived. Through domestic and foreign cases analysis studies and survey of the relevant experts, results were derived. In order to improve these points, in the intial planning establishment stage, planning of urban policy and institutional steps should be made and the plan should be appropriate to the local characteristics. In the design and operation of urban structure stage, detailed and feasible approach is needed and maintenance and management stage, participation of various stakeholders, including establishing governance and management practices could see the need.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.962-969
• /
• 2014

This study investigated the patterns and correlations of spinopelvic alignments in in middle school and high schools students of Gyeongnam areas in Korea using rasterstereography. Sixty-one subjects were recruited from May to October 2013, the average age of subjects was $16.40{\pm}2.20$ years. In the present results, PSIS ratio was statistically different between the sexes(male $21.15{\pm}2.40$%, female $23.41{\pm}3.28$%)(p<.01) and lordotic angle was statistically different between the sexes(male $33.44{\pm}8.46^{\circ}$, female $38.96{\pm}8.11^{\circ}$)(p<.001), but other parameters were not statistically different between the sexes. However, we verified that lordotic angle was significant correlation separately with pelvic tilt(r=.348), kyphotic angle(r=.609). Surface rotation was significant correlation separately with kyphotic angle(r=-.278), lordotic angle(r=-.256), trunk inclination(r=.493). These finding could be used as basic data research to confirm normal pattern of spinopelvic alignment and balance in health adolescents, and might help understand adolescents with structure problem in spine and pelvis.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.527-534
• /
• 2016

The emergent information society requires the talent for creative thinking based on problem-solving skills and comprehensive thinking rather than simple memorization. Therefore, the Korean curriculum has also changed into the direction of the creative thinking through increasing short-answer questions that can determine the overall thinking of the students. However, their scoring results are a little bit inconsistency because scoring short-answer questions depends on the subjective scoring of human raters. In order to alleviate this point, an automated scoring system using a machine learning has been used as a scoring tool in overseas. Linguistically, Korean and English is totally different in the structure of the sentences. Thus, the automated scoring system used in English cannot be applied to Korean. In this paper, we introduce an automated scoring system for Korean short-answer questions using predictability and unanimity. We also verify the practicality of the automatic scoring system through the correlation coefficient between the results of the automated scoring system and those of human raters. In the experiment of this paper, the proposed system is evaluated for constructed-response items of Korean language, social studies, and science in the National Assessment of Educational Achievement. The analysis was used Pearson correlation coefficients and Kappa coefficient. Results of the experiment had showed a strong positive correlation with all the correlation coefficients at 0.7 or higher. Thus, the scoring results of the proposed scoring system are similar to those of human raters. Therefore, the automated scoring system should be found to be useful as a scoring tool.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.103-110
• /
• 2010

In this paper, a new mode changeable asymmetric full bridge dc/dc converter is proposed to solve the freewheeling current problem of the conventional zero voltage switching(ZVS) phase shift full bridge(PSFB) dc/dc converter of low output voltage and high output current applications. The proposed converter is operated as an asymmetric full bridge converter when the duty cycle is less than 50% and active clamp full bridge converter when the duty cycle is greater than 50%. As a result, since its freewheeling current is eliminated, the conduction loss is lower than that of the conventional ZVS PSFB dc/dc converter. Moreover, ZVS of all power switches can be ensured along a wide load ranges and output current ripple is very small. Therefore, high efficiency of the proposed converter can be achieved. Especially since its operation mode is changed to the active clamp full bridge converter during hold up time and can be operated with 50~100% duty ratio, it can produce the stable output voltage along wide input voltage range. The operational principles, theoretical analysis and design considerations are presented. To confirm the operation, validity and features of the proposed converter, experimental results from a 1.2kW($400V_{dc}/12V_{dc}$) prototype are presented.