• Journal of the Korean School Mathematics Society
• /
• v.10 no.4
• /
• pp.415-435
• /
• 2007

A transition from elementary to secondary school, and among grades, among learning contents is a essential problem in education. A connectivity between learning contents is important in student's growth and development. A gap between lower grades and higher grades in elementary school is no less extensive than a gap between elementary mathematics and secondary mathematics. In this paper, we start with a critical mind about a transition and connectivity between lower grades and higher grades in elementary school. In order to compare between elementary grades, we firstly focus 4th grade mathematics which finish lower grades and start higher grades at the same time. First, we make up a questionnaire to 4th grade students and teachers in charge 4th grade. A questionnaire is composed of questions about the degree of difficulty in the learning(and teaching) of 4th grade mathematics comparing with 3rd grade mathematics. Second, we compare to lower grades lessons(1st grade) and 4th grade lessons using a qualitative method. we analyze the lesson contents, activities and time through 'analysis of the learning course'. And we compare the pattern of eliciting questions, question patterns, nomination patterns and feedback patterns between 1st grade and 4th grade lessons. We hope that this paper is a fundamental sources in investigating a connectivity between lower grades and higher grades in elementary mathematics in the future.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.199-205
• /
• 2010

Medium-density fiberboard (MDF) is widely used as an indoor building materials. However, formaldehyde resins, commonly used to bind MDF together, emit formaldehyde and other volatile organic compounds that cause health risk at sufficient concentration. In this study, condensed tannin having formaldehyde absorption ability was used to solve the problem of formaldehyde emission generated from surface material. The synthesis of melamine-formaldehyde resin and reaction of melamine-formaldehyde and condensed tannin were analyzed by FT-IR spectrum. Also surface properties, such as shear force, impact strength, tape adhesion, pencil hardness and gloss retention were measured. Free formaldehyde analysis was performed to analyze remaining unreacted formaldehyde. According to the results, the optimum shear force and impact strength could be obtained by 10 wt.% usage of condensed tannin. In cases of pencil hardness and gloss retention, the optimum properties could be obtained at 20 wt.% of condensed tannin. The amounts of formaldehyde emission of surface material containing 20 wt.% of condensed tannin was 59 ${\mu}g/m^2{\cdot}h$. The amounts of formaldehyde emission could be reduced 3 times by using 20 wt.% of condensed tannin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.125-131
• /
• 2018

Ascorbic acid (Vitamin C) has been widely used in skin care formulations. Due to its remarkable effects on anti-oxidation, collagen biosynthesis and whitening, ascorbic acid is considered as an effectible anti-aging active ingredient. But, the instability problems of ascorbic acid in cosmetic formulation such as oxidation, browning and changes in smell is the difficult issue to be overcome for the application of high concentration of ascorbic acid. We tried to stabilize the ascorbic acid in non-aqueous liquid formulation that contains polyol solvent at first. The non-aqueous system was effectible to reduce oxidation. But, ascorbic acid was crystallized in the non-aqueous formulation at the low temperature below $5^{\circ}C$. We tried to develop way to stabilize the ascorbic acid in aqueous solutions to solve the crystallizing problem. In this study, we search the optimal ratio of antioxidant combination, such as zinc sulfate, glutathione and curcuma longa (turmeric) root extract. Formulations were stored at - $16^{\circ}C$, $5^{\circ}C$, $25^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$ and cycle($5-40^{\circ}C$) (in incubator) for a period of eight weeks to investigate their stability. In the stability analysis, the test parameters consisted of color, scent, phase separation and sedimentation. Ascorbic acid stability was checked by HPLC analysis.

• Journal of Service Research and Studies
• /
• v.9 no.1
• /
• pp.51-71
• /
• 2019

The purpose of this research is to analyze the ETF market, which has a large increase in the number of listed shares and the market capitalization, and to identify the investment effects of ETFs. The study procedure and method used to calculate the return and change trend of ETFs for the sample of the transaction information, the transaction amount, and the market capitalization for the period from 2010 to 2018, and performed correlation and regression analysis. As a result, the ETF's total return was 2.11%, the domestic underwriting market ETF yield was 2.39%, and the stock ETF yield was 2.59%, which was lower than the KOSPI 200 index and the KOSPI 200 index. Index ETF was 2.63%, followed by stock ETF and oversea underwriting market ETF. The problem with ETF investment is that the annual return of ETFs and domestic ETFs is as low as 2%, which is not enough for investors to expect more than 5%. The study contributes to the realization of the ETF by analyzing the actual effect of the investment and to establishing considerations when buying ETFs from the viewpoint of investors. The direction of the research is to accumulate more ETF data and present the investment direction precisely.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.99-108
• /
• 2011

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents as fire, explosion or leakage of toxic gas at factories in order to not only protect the workers and neighbors but also prevent economic losses and environmental pollution. Though it is well known that accident probability is very low in NPP(Nuclear Power Plants), the reason why many researches are still being performed about the accidents is the results may be so severe. HRA is the main process to make preparation for possibility of human error in designing of the NPP. But those techniques have some problems and limitation as follows; the evaluation sensitivity of those techniques are out of date. And the evaluation of human error is not coupled with the design process. Additionally, the scope of the human error which has to be included in reliability assessment should be expanded. This work focuses on the coincidence of human error and mechanical failure for some important performance shaping factors to propose a method for improving safety effectively of the process industries. In order to apply in these purposes into the thesis, I found 63 critical Performance Shaping Factors of the eight dimensions throughout studies that I executed earlier. In this study, various analysis of opinion of specialists(Personal Factors, Training, Knowledge or Experience, Procedures and Documentation, Information, Communications, HMI, Workplace Design, Quality of Environment, Team Factors) and the guideline for construction of PSF were accomplished. The selected method was AHP which simplifies objective conclusions by maintaining consistency. This research focused on the implementation process of PSF to evaluate the process of PSF at each phase. As a result, we propose an evaluation model of PSF as a tool to find critical problem at each phase and improve on how to resolve the problems found at each phase. This evaluation model makes it possible to extraction of PSF succesfully by presenting the basis of assessment which will be used by enterprises to minimize the trial and error of construction process of PSF.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.325-331
• /
• 2013

The Baekje Gilt-bronze Incense Burner which was excavated in an ancient temple site in Neungsan-ri, within the City wall of Buyeo-Gun on 23rd December 1993, was a quintessence of the Bakje Arts that people could not have imagined until that time. The Baekje Gilt-bronze Incense Burner transcended 1400 years of time and space. The censer that finally came up to us delivered a kind of a powerful message to us. The power was so strong and mysterious that as if an ancestor who had been sleeping in the grave with a great silent had woken up and become alive to tell us something very precious. Baekje Gilt-bronze Incense Burner, unlike any other existing artifacts, might have a possibility that could provide an insight of the ancients' psych who once lived on our land. This kind of view from several archaeologists, therefore, made our hearts be filled with excitement and flutter. We call 21st century as an era of culture. This era requests that the culture needs to be ethnical but the culture also needs to go beyond that ethnic. In other words, a culture without an ethnic cannot exist, and a culture that puts an ethnic the very first before any other things cannot exist as well. Regaining our identities first and then embracing and harmonizing various cultures can be an wise way overcoming above problem. Hence, through this study, I intend to recognize characteristic of plasticity for Baekje Gilt-bronze Incense Burner, understand the world of Baekje people's spirit and thus provide an opportunity to shed new light on the Baekje Arts. By doing so, I would like to publicize a metal craft of Korea to the world. I also try to seek for an identity of Korea's craft culture which is receding and find a direction for the Korea's craft.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.95-101
• /
• 2008

Modeling of stock prices forecast has been considered as one of the most difficult problem to develop accurately since stock prices are highly correlated with various environmental conditions including economics and political situation. In this paper, we propose a agent system approach to predict Korea Composite Stock Price Index (KOSPI) using neural network and statistical methods. To minimize mean of prediction error and variation of prediction error, agent system includes sub-agent modules for feature extraction, variables selection, forecast engine selection, and forecasting results analysis. As a first step to develop agent system for KOSPI forecasting, twelve economic indices are selected from twenty two basic standard economic indices using principal component analysis. From selected twelve economic indices, prediction model input variables are chosen again using best-subsets regression method. Two different types data are tested for KOSPI forecasting and the Prediction results showed 11.92 points of root mean squared error for consecutive thirty days of prediction. Also, it is shown that proposed agent system approach for KOSPI forecast is effective since required types and numbers of prediction variables are time-varying, so adaptable selection of modeling inputs and prediction engine are essential for reliable and accurate forecast model.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.367-380
• /
• 2020

Recently, Korea's economy is facing a difficult economic situation due to sluggish domestic demand, low corporate investment and a cliff in youth employment. In order to overcome this problem and turn the economy into a virtuous circle, the government has introduced and implemented various economic policies. In this study, the effects of the corporate accumulated earnings tax system included in the 2014 tax code revision were to be verified. The validity of the business income was verified and analyzed using the financial data of the entity as to whether the income of the entity was being circulated to household income. First, validating the validity of whether the income tax on non-current income affects the level of an entity's investment, the results showed significant negative effects at a significant level of 5 per cent. Second, the analysis of whether the return tax on corporate income is affecting management decisions that increase the level of dividends for an entity has identified a metaphorical positive relationship. Third, it was confirmed that the income tax on uncurrency income does not have a significant effect on the increase in wages for workers. The result is presumed to be the main reason for the increased uncertainty in the economy and business environment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.193-200
• /
• 2008

Statement of problem: There have been a few studies about unsplinted implant retainted maxillary overdenture. Purpose: The purpose of this study was to examine the effect of different position of implant for 2 implants-retained maxillary overdenture. Materials and methods: Three-dimensional finite element models were used to reproduce an edentulous human maxilla with an implant-retained overdenture. Two implants in the canine tooth positions on both side and in the second premolar tooth positions on both side models were examined. Axial loads of 100 N were applied to the occlusal surface at the right first molar tooth positions. Maximum stress at the implant-bone interface and stress at the cortical bone surface just under the loading point were observed. Results and conclusion: Within the limits of this study, maximum stresses were concentrated around implant of canine position at loading side. The second premolar area was thought to be more favorable to distribution of stress on mucosa, alveolar bone and implants than canine area for maxillary overdenture.

• Journal of The Korean Association For Science Education
• /
• v.37 no.4
• /
• pp.651-658
• /
• 2017

The purpose of this study is to analyze the invention-related content of foreign science curricula and investigate the perception of science educators about the degree of relevance between science curriculum and invention. For the analysis of foreign science curricula, we investigated the programs of 10 nations, including the US, Canada, UK, Japan, Australia, Singapore, New Zealand, France, Finland and China. To analyze the relevance between Korean science curriculum and invention, we examined common topics such as science, integrated science, and science inquiry experiment, and investigated that the elements related to invention education were included in each 'achievement standard' and 'teaching and evaluation methods'. Science educators including science teachers were asked to evaluate the degree of relevance of invention education. The results were as follows. First, science curricula in many countries contained invention-related content. Second, science educators recognized that invention education was related to science curriculum, but the systematic connection was insufficient. Third, because it is mainly limited to the results of designing and device design, they recognized that the relevance of invention education, which focuses on various processes such as problem design, inventive techniques and intellectual property, was not revealed. Therefore, it is necessary to be process-oriented when developing invention education teaching-learning methods and related materials in science education for the future.