• Research in Community and Public Health Nursing
• /
• v.8 no.2
• /
• pp.178-196
• /
• 1997

The purpose of this study is to identify the kind, the frequency, and the type of Stress Management Program(SMPs) throughout life-span used foreign, recent research. The period of this study was from July 1 to Dec. 10, 1997. The data were collected through Medline using two concepts: stress management programs and life-span. The number of these research were 106 and thirty-one experimental researches that were tested the effectiveness of SMPs throughout life span were selected. The data were analysed by the kind, frequency, and life-span. The results were as follows: 1. The kind and frequency of SMP : The total number of the kind of SMP were twenty-two. The most used SMP was relaxation therapy, 22 out of 31. The second biofeedback was 10, the third, cognitive behavior program was 9, the fourth, nutrition and diet, and education were 7. The others were coping skill(4), cognitive therapy(4), breathing(4), imagery(3), autogenic training(3), sleep and rest(2), meditation(2), information(2), desensitization(2), hypnosis(2), behavior therapy(1), time management (1), visualization(I), yoga(I), diversion(1), and problem solving skill. 2. Throughout life-span: Most SMPs were applied to adolescents, young adults, and middle-adults. Other subjects could not be found under the schooler. 3. The type of SMPs : 28(90.3%) out of 31 research used combined-SMP : two-combined SMP, 5: three-combined SMP, twelve: four-combined SMP, seven: five-combined SMP. 4. Afterward, further study such as meta-analysis are needed in order to identify effective ness of the SMPs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.109-112
• /
• 2008

It has better seismic performance and construction performance in precast column than in conventional RC column. In this research, seismic performances of precast column are analyzed by OpenSEES. Main variables of analysis are concrete strength, jacking ratio of tendon, amount of tendon and size of segment. As the amount of tendon and jacking ratio are increased, the flexural strength is also increased. And there is very little effect as it varies concrete strength and size of segment. But high initial jacking ratio leads to early yielding of tendon. And it is considered that a size of segment is related on construction problem. And also, strain in core concrete is less than ultimate strain. Consequently, it is considered that the amount of transverse steel will be reduced.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.172-180
• /
• 2005

The purpose of this study is to suggest a new SRC(Steel Ready mixed Concrete) lining board. The research method of this study includes problem analysis of existing lining boards a constant load test and a fatigue test. The results of this study are as follow : 1) the suggested new lining board improves the function and reduce slipperiness than existing lining boards. 2) the strength of the new SRC lining board is analyzed as superior than existing lining boards from the results of constant load test and fatigue test.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.1 s.29
• /
• pp.128-137
• /
• 2006

Recently the role and the importance of design value engineering is expected to be high, so research is needed for its effective accomplishment. But in domestic arena, the introduction of the history of design value engineering is too short and insufficient in act of research. Therefore in this research we have suggest the standard for the effective accomplishment of design value engineering work. The way is the abstraction many causes. firstly, we analyzed the team project case of value engineering professional instruction. second, we analyzed the cause of problem produced in accomplishment process of design value engineering work through research for the professional field. So from the base of the analyzed content, we have suggest main control factor for the effectiveness of design value engineering work and the following scheme and process of work efficiency optimization.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.204-215
• /
• 2008

Demolition work is a precedence activity that is performed earlier than other remodeling activities. And demolition work is one of the critical path activities. So, demolition work is needed for systematic plan and management. However, contractors of the remodeling project established a rough plan and did not consider recycling wastes, safety of workers and structural stable of building. To improve this problem, a eco-friend process model of remodeling project is needed to be established. The process model is composed of five phases; 1) survey and analysis of general condition of demolition work, 2) prepare documents of demolition work 3) establishing demolition work plan, 4) demolition and inspection, 5) post-demolition management. Especially, demolition documents are based on establishing WBS, selecting the equipment and method, waste management and structure reinforcement. A process model of eco-friend demolition work is developed by using IDEF0 method.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.147-155
• /
• 2008

In the 1970s, increasing penetration of the housing co-housing policy, reconstruction be a great success to improve 1990‘s Old aged apartment's performance. However, in case of reconstruction, it causes the problem such as city environment destruction, resource waste, real-estate speculation etc. With the trend of sustainable construction and resource recycling, remodeling gets more attention than before. In case of country's remodeling, conventional method causes some problems such as delayed construction period and increased cost. Therefore, efforts that obtain economical efficiency are required to power remodeling through use of prefabrication method like PC technology that is useful for reduction effect of construction period, cost and site labor and excellent quality. This research indicates reduceing factor for facilitating prefabrication method and technology selecting framework through specific of Expanding Floor method and remodeling cases to increase the efficiency of remodeling, considers construction parties approaching plan for prefabrication as occasion that powers remodeling.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.109-114
• /
• 2016

Purpose: The underground air is the warm air discharged from the porous volcano bedrock 30-50m underground in Jeju, including excessive humidity. The temperature of the underground air is $15-20^{\circ}C$ throughout the year. In Jeju, the underground air was used for heating greenhouses by supplying into greenhouses directly. This heating method by supplying the underground air into greenhouses directly had several problems. The study was conducted to develop the heat pump system using underground air as heat source for resolving excessive humidity problem of the underground air, adopting the underground air as a farm supporting project by Ministry of Agriculture, Food and Rural Affairs(MAFRA) and saving heating cost for agricultural facilities. Method: 35kW scale(10 RT) heat pump system using underground air installed in a greenhouse of area $330m^2$ in Jeju-Special Self-Governing Province Agricultural Research & Extension Services, Seogwipo-si, Jeju. The inlet and outlet water temperature of the condenser, the evaporator and the thermal storage tank and the underground air temperature and the air temperature in the greenhouse were measured by T type thermocouples. The data were collected and saved in a data logger(MV200, Yokogawa, Japan). Flow rates of water flowing in the condenser, the evaporator and the thermal storage tank were measured by an ultrasonic flow meter(PT868, Panametrics, Norway). The total electric power that consumed by the system was measured by a wattmeter(CW240, Yokogawa, Japan). Heating COP, rejection heat of condenser, extraction heat of evaporator and heating cost were analyzed. Result: The underground air in Jeju was adopted as a farm supporting project by Ministry of Agriculture, Food and Rural Affairs(MAFRA) in 2010. From 2011, the heat pump systems using underground air as a heat source were installed in 12 farms(16.3ha) in Jeju.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.696-702
• /
• 2007

The family of (Sr,Mg)-doped $LaGaO_3$ compounds, which exhibit high ionic conductivity at $600-800^{\circ}C$ over a wide range of oxygen partial pressure, appears to be promising as the electrolyte for intermediate temperature solid oxide fuel cells. Conventional synthesis routes of (Sr,Mg)-doped $LaGaO_3$ compounds based on solid state reaction have some problems such as the formation of impurity phases, long sintering time and Ga loss during high temperature sintering. Phase stability problem especially, the formation of additional phases at the grain boundary is detrimental to the electrical properties of the electrolyte. From this point of view, we focused to synthesize single phase (Sr,Mg)-doped $LaGaO_3$ electrolyte at the stage of powder synthesis and to apply relatively low heat-treatment temperature using novel synthesis route based on combustion method. The synthesized powder and sintered bulk electrolytes were characterized by XRD, TG-DTA, FT-IR and SEM. AC impedance spectroscopy was used to characterize the electrical transport properties of the electrolyte with the consideration of the contribution of the bulk lattice and grain boundary to the total conductivity. Finally, relationship between synthesis condition and electrical properties of the (Sr, Mg)-doped $LaGaO_3$ electrolytes was discussed with the consideration of phase analysis results.

• KDI Journal of Economic Policy
• /
• v.29 no.1
• /
• pp.177-196
• /
• 2007

This paper investigates the cyclical patterns of buffer capital using an unbalanced panel data for the banks in 30 OECD countries and 7 non-OECD Asian countries. We test whether the relationships between buffer capital and business cycle are systematically different across country groups controlling for other potential determinants of bank capital. We find that the correlation is positive for developed countries while it is negative for Asian developing countries. These findings suggest that, once Basel II is implemented, developing countries are more likely to observe an increase in output volatility. We then review the policy recommendations to mitigate the procyclicality problem of Basel II.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.163-168
• /
• 2010

In this paper, we propose novel two-way relaying scheme in which number of two users transmit the signal to number of two destination. The scheme is difference with conventional multi-hop two-way relay scheme in which number of two users exchange the each signal. In the conventional scheme, each user have to perform back-propagating self-interference method to remove the own signal from received signal. It occurred to increase the complexity for signal processing at the user. To overcome the problem, we apply the Pre-cancellation which can reduce the process of back-propagating self-interference to our proposal network Simulation result show that proposal scheme outperform the convention multi-hop two-way relay scheme. Also we analysis the trad-off between performance and complexity accordance with using Pre-cancellation method.