• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.60-67
• /
• 2023

Background: In our study, a silver diamine fluoride (SDF) compound for the treatment of dental caries was synthesized to characterize its remineralization activity upon direct application to deciduous teeth. This study aimed to use microscopic computed tomography (microCT) and nanoindentation to evaluate whether SDF composite application could effectively arrest dental caries in five exfoliated primary molars. Methods: Carious teeth were extracted and visually examined using quantitative photofluorescence devices (Qraycam and QraypenTM). After performing microCT, the SDF composite was applied to the teeth according to the manufacturer's instructions. The researchers exchanged and precipitated the irritant saliva once daily for 1 week. The teeth were sectioned longitudinally through the centers of the mesial and distal surfaces, embedded, polished, and measured using nanoindentation. Thereafter, microCT was repeated. Statistical analyses were performed using GraphPad Prism software. Results: Following SDF composite application, a remineralized layer was observed on microCT images, and the hardness increased when measured using nanoindentation. We found that demineralized enamel presented with an increased number of irregular crystals in the deep carious lesion group compared with those in the shallow carious lesion group, resulting in a rougher surface. Conclusion: The SDF composite may be used for remineralization of early caries and cessation of advanced caries in primary molars.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.453-460
• /
• 2010

This study was one of the caries pattern studies. The purpose was to investigate the degree of intraoral symmetry of dental caries in the primary dentition. The dmfs data from children aged 36 to 71 months were analyzed. Pearson correlation coefficients between right teeth and left teeth were from 0.558 (upper canines) to 0.847 (upper central incisors) and 0.905 in total (P<0.01). Differences between right teeth and left teeth were mostly not significant (P>0.05). Pearson correlation coefficients between upper teeth and lower teeth were from 0.150 (right lateral incisors) to 0.506 (right first molars) and 0.680 in total (P<0.01). Differences between upper teeth and lower teeth were mostly significant (P<0.05). Percentages of bilateral caries experience cases per cases having caries experience were from 34.0% (upper canines) to 80.1% (upper central incisors), and from 53.9% (distal) to 84.9% (mesial) in upper central incisors, from 34.1% (mesial) to 45.0% (occlusal) in upper first molars, from 20.7% (distal) to 48.0% (occlusal) in upper second molars, from 34.4% (buccal) to 58.1% (occlusal) in lower first molars, and from 29.7% (distal) to 61.4% (occlusal) in lower second molars, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.627-634
• /
• 1998

Children who have severely destructive anterior primary dentition, as in nursing-bottle caries, in trauma, in rampant caries and in developmental defects, present the dentist with one of the most perplexing situations in dentistry. Especially, children with managed behavor difficultly is very severly situations. This paper reported a new technique for the utilization of resin post and strip crown to indirect methods on severely destructive primary anterior teeth. We name it "indirect short resin post crown" in this paper. Indirect technique be considered to be a simple, a retentive, intensive, color-stable and esthetic restoration.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.429-449
• /
• 1996

An objective definition of the anomaly is not avaliable and most investigators define the term differently or fail to describe their criterion. Because dental anomaly may lead to many complications, early detection and diagnosis of dental anomalies are essential steps in the evaluation of the child patient and in treatment planning. These procedures require detailed medical and dental histories, through clinical examination and the use of radiographs. So, this study was designed to find out the prevalence of dental anomalies. The clinical and roentgenographic examination was undertaken for 8,054 children at age from 0 to 15 years and statistical analysis was done. The results were as follows : 1. Among the examined subjects, 2,134 subjects(26.5%) showed dental anomalies. The prevalence of individual dental anomalies were as follows : supernumerary teeth 15.6%, congenitally missing teeth 6.6%, fusion 2.2%, odontoma 0.35%, microdontia 1.2%, macrodontia 0.05%, gemination 0.22%, talon cusp 0.36%, dens evaginatus 0.24%, dens invaginatus 0.15%, dilaceration 0.27%, taurodontism 0.09%, abnormal tooth position 1.7%, natal & neonatal teeth 0.92%, amelogenesis imperfecta 0.01%. 2. Significant correlations between the groups with individual dental anomalies were as follows : between group I and other groups, there was negative correlation, especially group I and group II. And the correlation coefficient between male and female showed differences. 3. For the supernumerary teeth group, the prevalence of male was higher than female(p<0.001). While for the congenitally missing teeth, macrodontia, microdontia, abnormal tooth position group, the prevalence of female was greater than male(p<0.001). 4. For the congenitally missing teeth group, the mandibular primary lateral incisor showed the highest incidence in primary dentiton, while mandibular lateral incisor in permanent dentition. In the mandible(72.5%), this site showed higher prevalence than in maxilla. In the case with deciduous congenitally missing teeth, the prevalence of successive permanent congenitally missing teeth was about 33.9%, the incidence was highest in mandibular lateral incisors. 5. Most supernumerary teeth existed on middle area and showed inverted position and unerupted state. In addition, supernumerary teeth showed higher incidence on maxilla (99.3%). 6. In the case with deciduous fused teeth, the prevalence of successive permanent congenitally missing teeth was 39.9%, while that of successive permanent fused teeth was 2.7%. And the highest rate of the prevalence (40.3%) appeared in fusion of mandibular deciduous lateral incisor and canine. 7. In the case of odontoma, the prevalence was higher in maxilla(78.6%) and anterior region(82.7%) than mandible and posterior region.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.103-108
• /
• 1999

Restoration of severly carious, malformed or traumatically fractured primary incisors is one of the most difficult challenges in restorative dental care for preschoolers. In restoring primary anterior teeth, four types of complete coverage crowns have been attempted over the years. Stainless steel crowns, open-faced stainless steel crowns, acid-etched crowns(strip crowns), and preformed polycarbonate crowns have been the choices. While these restorations have been acceptable for many patients, they all have very distinct limitations. The ideal full coronal restoration for a primary incisor requires durability, retention, and esthetics. This paper reported veneered stainless steel crown restoration of primary anterior teeth by silicoater technique. Veneered stainless steel crown restoration by silicoater technique is considered to be a durable, retentive, and esthetic restoration.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.43-52
• /
• 2016

PURPOSE. This study was conducted to evaluate the effects of full-coverage all-ceramic zirconia, lithium disilicate glass-ceramic, leucite glass-ceramic, or stainless steel crowns on antagonistic primary tooth wear. MATERIALS AND METHODS. There were four study groups: the stainless steel (Steel) group, the leucite glass-ceramic (Leucite) group, the lithium disilicate glass-ceramic (Lithium) group, and the monolithic zirconia (Zirconia) group. Ten flat crown specimens were prepared per group; opposing teeth were prepared using primary canines. A wear test was conducted over 100,000 chewing cycles using a dual-axis chewing simulator and a 50 N masticating force, and wear losses of antagonistic teeth and restorative materials were calculated using a three-dimensional profiling system and an electronic scale, respectively. Statistical significance was determined using One-way ANOVA and Tukey's test (P<.05). RESULTS. The Leucite group ($2.670{\pm}1.471mm^3$) showed the greatest amount of antagonist tooth wear, followed by in decreasing order by the Lithium ($2.042{\pm}0.696mm^3$), Zirconia ($1.426{\pm}0.477mm^3$), and Steel groups ($0.397{\pm}0.192mm^3$). Mean volume losses in the Leucite and Lithium groups were significantly greater than in the Steel group (P<.05). No significant difference was observed between mean volume losses in the Zirconia and Steel groups (P>.05). CONCLUSION. Leucite glass-ceramic and lithium disilicate glass-ceramic cause more primary tooth wear than stainless steel or zirconia.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.328-337
• /
• 2010

The purpose of this study was to research the traumatized primary teeth and investigate following factors: sex, age, cause, place and time(of the year) of injury, elapsed time, area and type of injury, dental treatment and prognosis. The analysis includes total of 1533 traumatized primary teeth from 758 children aging from 6 months to 6 years(mean age: 2.8) from 2003 to 2007. The result follows : 1. The children of age between 1-2 and 2-3 were involved in the largest number of injuries in both sexes with boy/girl ratio of 1.77:1(p<0.001). 2. Fall and collision were the main causes of traumatic dental injury, especially in younger children(p<0.05). Places of injury occurrence varied: home, outdoors, and kindergarten. Warm climate accounts for frequent outdoor injuries in May, September and October(p<0.001). 3. Most of the children visited dental clinic within 24 hours of the injury(77.6%). From March to September, dental trauma occurrences were distributed evenly, except for Winter period(p<0.001). 4. Upper central incisors were the most commonly affected teeth, and the injuries usually involved 1 tooth or 2 teeth. 5. Periodontal tissue injuries dominated and subluxation was the most common type. Lateral luxation, enamel fracture, intrusion and root fracture followed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.545-553
• /
• 2003

To achieve good dentin bonding, we must obtain proper wet dentin surface. The purpose of this study was to compare dentin surface according to different wetness degree by AFM image as studying how to obtaining proper wet dentin surface. Intact recently extracted primary teeth were used in the study. The extracted teeth were stored in distilled water at $4^{\circ}C$ until prepared. The teeth were used to prepare 1mm thick dentin disks with exposed surfaces parallel to the occlusal surfaces. The surface of the dentin were polished with polishing disk. The sample were ultrasonically cleaned with distilled water. The sample of each group were treated by different ways. We compared dentin surface of each group by AFM image. From the experiment, the following results were obtained. 1. Acid etching in the dentin surface of primary teeth, resulted in the removal of the smear layer, which opened dentinal tubules, caused the demineralization of peritubular and intertubular dentin, and exposed a collagen-rich transition zone. 2. If the etched dentin was so dehydrated, the intertubular dentin surfaces deceased in height and the diameters of the dentinal tubules decreased slightly. 3. In the group dried with compressed air for 20 seconds at 2 cm, the dentin surfaces were too excessive dried and dehydrated. 4. In the group dried with compressed air for 3 seconds at 2 cm, dry cotton, wet cotton, microbrush and absorbent tissue paper, the dentin surfaces were properly wet.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.429-437
• /
• 2006

The purpose of this study was to evaluate the shade of primary incisors. One hundred and nineteen children 394 maxillary anterior primary incisors were assessed. Digital shade analysing system ($ShadeScan^{TM}$, Cynovad, Canada) was used for measuring the shades This system enabled to improve the accuracy and objectivity The images of the teeth were taken with $ShadeScan^{TM}$ and shade maps of the teeth were obtained with $ShadeScan^{TM}$ software. The shades of three regions (cervical third middle third, incisal third) of the teeth were evaluated. The results were as follows : 1. In cervical third of primary incisors, D2 and D3 were the major shades and D2 was the most frequent shade. 2. In middle third of primary incisors, C1, D2, and B1 were the major shades and C1 was the most frequent shade. 3. In incisal third of primary incisors, A2 was the most frequent shade and D2 shade followed.

• Journal of Technologic Dentistry
• /
• v.9 no.1
• /
• pp.51-55
• /
• 1987

One of the primary advantages of acrylic resin teeth is their ability to bond chemically to the denture base resins. Fracture od acrylic resin teeth from a maxillary denture, however, is not uncommon. Bonding failures have been attributed to faulty boil-out procedures that fail to eliminate all traces of wax from the ridge lap surfaces of the teeth and to contamination of the ridge lap surface by careless application of tinfoil substitute. Attempts to increase the strength of the bond between acrylic resin teeth and heat-cured denture base resin include grinding the glossy ridge lap surface (in fluid system), painting the ridgelap surface of the teeth with monomer-polymer solution, and cutting retention grooves in the ridge lap surface of the teeth. This latter method has been tested by applying a tensile force in a labial direction to the incisal part of the lingual surface of the acrylic resin teeth. A progressive shear compressive load was applied at an angle to the lingual surface of acrylic resin teeth bonded to denture base acrylic resin. No statistically singificant advantage was derived by preparing retention grooves of different shapes in the ridgelap surface of the denture teeth.