• 풍력에너지저널
• /
• 제5권1호
• /
• pp.50-55
• /
• 2014

Surface Permanent-Magnetic-Synchronous-Generator (SPMSG) discussed in the present study has operational characteristics such as high rotational speed over 1,000 rpm and centrifugal force of 12 kN·m for each magnet. Structure-development analysis for the minimization of rotor-core weights and the maximization of thermal emission is performed by applying the aluminum-laminated cap which combines the advantages of IPM and SPM in order to overcome the difficulty that attaching the magnet to rotor-core only with an adhesive. In this study, the simulations in terms of structure and electromagnetic were performed with the variable parameters such as shape and thickness of laminated-cap and division method of magnet. As a result, condition for minimized centrifugal force with minimum loss is derived.

• 대한물리치료과학회지
• /
• 제9권3호
• /
• pp.97-106
• /
• 2002

Purpose. This study was tried to compare the effect of the change in postural deviation caused by the pain side Subjects and Methods. Inpatients and outpatients (n=71) were selected from I hospital who have a musculoskeletal low back pain and shoulder pain without any history of the central nervous system (CNS) lesions, orthopaedic problems of the both lower extremities, or the vestibular and the visual default. For the control group, normal and healthy subjects (n=30) were selected without any history of weight bearing disorders. the weight bearing was rated by the computerized force plate. Results. 1) Postural deviation was not significant difference between patients and control group(p<0.01). But postural deviation in patients was more pronounced than control group. 2) There was significant difference of postural deviation between in patients according to the pain side(p<0.01). When the pain side was on the left side, postural deviation tended to the right. When the pain side was on the right side and vertebral body, postural deviation tended to the left. 3) There was no significant difference of postural deviation between regional pain in shoulder and regional pain in low back(p<0.01). Discussions and Conclusion. As a result, the pain, for sure, affected the good posture and its keeping process directly or/and indirectly. Therefore, as the postural deviation increases, the additional energy consumption increased by the works of the muscles to keep the good posture. Preponderated postural deviation, furthermore, could load too much to the musculoskeletal system, leading to increase the pain. The postural deviation, a result of the pain, can cause a secondary deformity of the distal area as a compensatory reaction, and this compensation actually become a cause of the musculoskeletal symptom back in a cycle. Therefore, the appropriate treatment of the musculoskeletal problem and the education of the posture correction should be given to decrease the pain, preventing the secondary deformities, and increasing muscle energy efficiency of the posture remaining muscles.

• 설비공학논문집
• /
• 제20권7호
• /
• pp.478-485
• /
• 2008

The extreme steam temperature deviation experienced in the superheater of a tangentially fired boiler can seriously affect its economic and safe operation. This temperature deviation is one of the main causes of boiler tube failures. The steam temperature deviation is mainly due to the thermal load deviation in the lateral direction of the superheater. The thermal load deviation consists of several causes. One of the causes is the non-uniform heat flow distribution of burnt gas on the superheater tube system. This distribution is very difficult to measure in situ using direct experimental techniques. So, we need thermal load model to estimate the tube temperature. In this paper, we propose a thermal load distribution model by using CFD analysis and plant data. We successfully predict the tube temperature and the steam flow rate in a final superheater system from the thermal load model and one dimensional heat-flow system analysis. The proposed model and analysis method would be valuable in preventing the frequent tube failure of the final superheater tubes.

• Journal of Biosystems Engineering
• /
• 제31권1호
• /
• pp.9-15
• /
• 2006

Draft control is key technique in plow control system for automation of implement control system. To make the consistent draft force is an essential factor for preventing the reduction of working efficiency by tractor's slip and also improving the working efficiency. Therefore, the purpose of this study is to develop the draft sensor for draft control of plow and evaluate the usability of the algorithm of draft control system using proportional control valve. The developed draft control system could extract the draft force very well regardless of draft condition, change of setting draft force and response time in the response characteristic test. The maximum draft force at 3-Point linkage was 10,000 N and the deviation of the control system was 125.8 N in steady state condition. The developed control system worked very well with regard to the change of draft force in field and even in soil condition with soil reaction. The results of experiment showed the characteristics of response was sufficient to be used as the implement draft control system for tractor using proportional valve.

• 한국멀티미디어학회논문지
• /
• 제3권5호
• /
• pp.506-515
• /
• 2000

본 논문은 학교현장에서 학습자의 창의력 신장을 위해 멀티미디어 교육을 지원하는 웹 기반 실시간 교육 시스템을 제안하였다. 제안된 시스템은 교수·학습자간의 실시간 상호작용과 개별학습, 학습자의 학습일탈을 방지하기 위한 강제화면 분배를 지원할 수 있게 설계되었다. 본 시스템은 UML을 적용하여 다중 사용자 환경에서의 실시간 메시지 교환과 관리를 위한 모듈을 두어 효율적인 상호작용이 가능하게 하였으며, 학습자의 실험·실습을 위한 시뮬레이션이 이루어지고 실험의 방법과 결과분석 등에 대한 질의 응답을 지원한다. 학습자의 학습진행과 지식형성을 위해 시스템의 교육적 기반을 구성주의에 두었다.

• 컴퓨터교육학회논문지
• /
• 제5권3호
• /
• pp.127-133
• /
• 2002

본 논문은 학교현장에서 학습자의 창의력 신장을 위해 멀티미디어 교육을 지원하는 웹 기반 실시간 교육 시스템을 제안하였다. 제안된 시스템은 교수 학습자간의 실시간 상호작용과 개별학습, 학습자의 학습일탈을 방지하기 위한 강제화면 분배를 지원할 수 있게 설계되었다. 본 시스템은 UML을 적용하여 다중 사용자 환경에서의 실시간 메시지 교환과 관리를 위한 모듈을 두어 효율적인 상호작용이 가능하게 하였으며, 학습자의 실험 실습을 위한 시뮬레이션이 이루어지고 실험이 방법과 결과분석 등에 대한 질의 응답을 지원한다. 학습자의 학습진행과 지식형성을 위해 시스템의 교육적 기반을 구성주의에 두었다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.776-783
• /
• 2022

Since Mechanical, Electrical, and Plumbing(MEP) routing is a repetitive and experience-centered process that requires considerable time and human resources, if automated, design errors can be prevented and the previously required time and human resources can be reduced. Although research on automatic routing has been conducted in many industries, the MEP routing in AEC projects has yet to be identified due to the complexity of system configuration, distributed expertise, and various constraints. Therefore, the purpose of this study is to identify the target subjects for MEP routing automation and the constraints of each subject. The MEP design checklist provided by a CM company and existing literature review were conducted, and target subjects and constraints were identified through process observation and in-depth expert interviews for five days by visiting a MEP design company. The target subjects were largely divided into six categories: air conditioning plumbing, air conditioning duct, restroom sanitary plumbing, heating plumbing, and diagram. The findings from interviews show that work reduction and error reduction has the greatest effect on air conditioning plumbing while the level of difficulty is the highest in air conditioning duct and restroom sanitary plumbing. Major constraints for each subject include preventing cold drafts on air conditioning pipes, deviation in ventilation volume in air conditioning ducts, routing order on restroom sanitary plumbing, and separation distance from the wall on heating plumbing. In this way, subjects and constraints identified in this study can be used for MEP automatic routing.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.589-599
• /
• 2017

Objective: The objective of this study was to measure the upper-limb motions and postures of grapes-harvesting tasks using electrical goniometers and analyze the upper-limb motions in a kinematic way to assess the risk of musculoskeletal disorders. Background: Grapes farmers are exposed to various risk factors of musculoskeletal disorders (MSDs) such as repetitive upper-limb motions, non-neutral postures, and manual handling of heavy items. The farmers have to use scissors repetitively while harvesting grapes with their being arms elevated over the shoulder height, which presumed to increase the physical workload. It has been reported that the grapes farmers feel the harvesting task as the one of the hardest work in cultivating grapes. We tried measure the wrist and elbow angles while the farmers were carrying out harvesting tasks to understand how much workload the work impose on the farmers, which can be helpful in making interventions of preventing musculosksletal disorders among grapes farmers. Method: We measured joint angles at the right wrist and elbow with a wireless measuring system with two electrical goniometers from five grape farmers. The grapes-harvesting task was classified into 6 different subtasks: 1) searching, 2) picking, 3) cleaning, 4) carrying, 6) storing, and 7) miscellaneous tasks. The subtasks were compared by mean angles, 10%, 50%, and 90% APDF values of wrist flexion/extension, ulnar/radial deviation, and elbow flexion. Results: The Kruskal-Wallis tests showed that the 10th percentiles of APDF of ulnar/radial deviation and flexion/extension of the wrist significantly differs among subtasks (p<0.05). It was found that the farmers assumed more deviated wrist postures in the ulnar direction when they picking and adjusting the grapes. The use of scissors seemed to force the farmers to severely bend their wrist in the directions of ulnar deviation and flexion. The grapes-harvesting task showed similar wrist postures and motion with poultry deboning and milking tasks. Conclusion: The grapes harvesting tasks make the farmers take ulnar deviated and extended postures in the wrist. The use of scissors makes them take more severely deviated postures in the wrist. Safety guidelines including use of ergonomic scissors can be provided to the farmers to improve their work conditions. Application: The results of this study can be used as a basic data for the development of safety guidelines for agricultural work.

• 대한화학회지
• /
• 제60권2호
• /
• pp.118-124
• /
• 2016

파라벤은 화장품, 식품, 의약품 등에 첨가되는 살균성 보존제로 미생물의 성장을 억제한다. 그러나 체내에서 에스트로겐과 유사한 작용을 하는 내분비계 교란물질이며, 특히 독성물질에 민감한 영유아 및 태아에게 노출될 경우 생식기 기형, 고환암, 성조숙증 등 성장발달에 큰 영향을 미친다. 따라서 본 연구에서는 영아가 주로 섭취하는 모유에서의 파라벤 수준을 확인하기 위하여 모유 중 4가지 파라벤(methyl paraben, ethyl paraben, propyl parabne, butyl paraben)의 분석법을 확립하였다. 시료는 액체상추출(Liquid-liquid extraction, LLE)을 통하여 전처리 한 후, 액체크로마토그래피 텐덤 질량분석기(liquid chromatography tandem mass spectrometry, LC-MS/MS)를 사용하여 정량분석 하였다. 확립된 분석조건에서 얻어진 검량선의 직선성은 r² > 0.999이고, 검출한계(LOD)는 0.019~0.044 ng/mL이었다. 또한 정확도는 85.3~105.9%, 정밀도는 10% 이하의 값을 나타내었다. 10개의 모유시료 중 파라벤류의 평균농도 ± 표준편차는 MP 0.660 ± 0.519 ng/mL, EP 1.631 ± 2.081 ng/mL, PP 0.326 ± 0.320 ng/mL이었고, BP는 불검출 되었다.