• Korean Journal of Construction Engineering and Management
• /
• v.24 no.1
• /
• pp.3-11
• /
• 2023

According to the post evaluation scheme in Korea of a public construction project which is more than 30 Billion KRW, project performance is evaluated by investigating outcomes and effects of the construction after the completion of the project. The current post evaluation results can be used for planning and estimating a construction project in the future. However, it is not easy to utilized for an on-going project because the system does not provide the phase-based performance of a project. Although project planning performance is important for project initiation, few attempt has been made to evaluate planning performance in Korea. The purpose of this study is to provide a conceptual performance evaluation of planning performance using preliminary feasibility study conducted by Korea Development Institute. This study developed a planning performance database using data extracted from preliminary feasibility study reports of the completed 354 road construction projects. This study analyzed the performance of the planning stage of road projects by developing absolute metrics such as standard construction cost and standard construction schedule based on a Lane-Km. Using the standard construction cost and schedule metrics, the planning performance was analyzed by project characteristics. The results of this study can be used for phase-based performance evaluation from planning phase to construction phase.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.3
• /
• pp.283-288
• /
• 2011

For the earthquake resistance design designer should provide that structural yielding process is principally designed with the ductile failure mechanism. In order to get the ductile failure mechanism for typical bridges, pier columns yielding should occur before that of connections. However domestic bridge design with unnecessary stiff substructure leads to unnecessary seismic loads and makes it difficult to get the ductile failure mechanism. Such a problem arises from the situation that earthquake resistant design is not carried out in the preliminary design step. In this study a typical bridge is selected as an analysis bridge and design strengths for connections and pier columns are determined in the preliminary design step by carrying out earthquake resistant design. It is shown through this procedure that it is possible to get the ductile failure mechanism with structural members determined by other design.

• Journal of forensic and investigative science
• /
• v.2 no.2
• /
• pp.67-91
• /
• 2007

The nature of deaths occurred at sea may be revealed the differences from that in the land, but there is no comprehensive statistical analysis of deaths occurred at Korean Sea so far. Therefore, the cases of deaths or missing in the period 1993 - 2006 were analyzed by the cause, place of death, and results of preliminary investigation. In the period from 1993 to 2006, over 1000 peoples were died or missing every year. The cases of marine safety accidents including self-carelessness and mishap were approached over 60% and cases of homicide were less than 1%. The closure cases of preliminary investigation were reached over 70% and the most of deaths occurred in fishing vessels (the range of 20 ~ 99 tonnage). The suspension cases of preliminary investigation were reached to 70% of all missing and drowning cases. The results showed that the most of deaths occurred at sea could be prevented by the safety regulations including mandatory report of accidents, marine safety education and training, punishment the people responsible for the accidents. For the unidentified bodies, data should be collected and recorded for the future identification. The crime scene investigators should be trained to ensure the quality of their professional skills regularly.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.2
• /
• pp.77-86
• /
• 2020

Nonlinear static analysis and preliminary evaluation were performed in this study to evaluate the seismic performance of unreinforced masonry buildings subjected to various soil conditions based on the revised Korean Building Code. Preliminary evaluation scores and nonlinear static analyses indicated that all buildings were susceptible to collapse and did not reach their target performance. Therefore, retrofit of those building models was carried out through a systematic procedure to determine areas to be strengthened. It was possible to make most building models satisfy performance objectives through the reinforcement alone of damaged external shear walls. However, the application of a preliminary evaluation procedure to retrofit design was found to be too conservative because all the retrofitted building models verified with nonlinear static analysis failed to satisfy performance objectives. Therefore, it is possible to economically retrofit unreinforced masonry buildings through the fortification of external walls if a simple evaluation procedure that can efficiently specify vulnerable parts is developed.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.233-238
• /
• 2012

In this study, we carried out a precedent investigation for an ultra-large container ship, which is expected to be a higher value-added vessel. We studied a preliminary optimized design technique for estimating the principal dimensions of an ultra-large container ship. Above all, we have developed optimized dimension estimation models to reduce the building costs and weight, using previous container ships in shipbuilding yards. We also applied a generalized estimation model to estimate the shipping service costs. A Genetic Algorithm, which utilized the RFR (required freight rate) of a container ship as a fitness value, was used in the optimization technique. We could handle uncertainties in the shipping service environment using a Monte-Carlo simulation. We used several processes to verify the estimated dimensions of an ultra-large container ship. We roughly determined the general arrangement of an ultra-large container ship up to 1500 TEU, the capacity check of loading containers, the weight estimation, and so on. Through these processes, we evaluated the possibility for the practical application of the preliminary design model.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.4
• /
• pp.659-668
• /
• 2013

Objectives : The purpose of this study is to analyze the causes of stress driven by the national examination and to find out correlation between stress factors and students' general characteristics. Methods : Data were collected from self-reported questionnaires by dental hygiene students in D university in February, 2012. Results : Those having good high school GPAs (p<.05) and high preliminary test scores (p<.01) towards dental hygienist (p<.05). National license examination was the most stressful factor for 54.2% of the students. Much more stressful pressure goes to students of non-scheduled admission (p<.01), students who graduated from vocational high schools(p<.01), students with good high school GPAs (p<.05), and having high preliminary test scores(p<.05). Most of the students tended to bear the burden on national written examination with an average of 4.17. The most difficult subject was oral biology introduction (average 4.52). Oral biology introduction was more stressful to students of early admission, students graduating from vocational high schools (p<.05), students with good high school GPAs (p<.05), and students who had relatively low preliminary test scores (p<.001). Conclusions : It is crucial to reduce stress factors and to develop related programs.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.125-129
• /
• 2006

In the present study, preliminary design and analysis of flow distribution for a jet pump, which is able to transfer fuel from the tank to the engine, were performed as an aerospace component technology development project. The jet pump is a core part, which is normally installed in the fuel tank, to supply the fuel from the tank to the engine feed pump, or to transfer the feed between tanks. In order to design preliminarily installed in the jet pump, equations for design were modelled using SIMULINK, and the design was carried out based on the simulation model.

• International Commerce and Information Review
• /
• v.4 no.2
• /
• pp.1-12
• /
• 2002

The purpose of this paper is to examine the scope of the application of Preliminary Draft Convention, which will be fixed as international uniform rules soon, in relation to the CISG. First, this Draft Convention will cover service contracts as well as sales contract of goods, but the license agreement will be excepted because it does not transfer the complete property. Second, this will cover the commercial contracts(sales or services) concluded by data message fully or partially. Third, this will be applied in international contract regardless of contracting states or non-contracting states. As it is very difficult to confirm the places of business of contracting parties in on-line contracts, the first criterion to confirm them is the indication by the party in each contract. This presumption may be supplemented, if they are not indicated in the contract, by the location of the equipment and technology supporting an information system used by a legal entity for the conclusion of a contract. It is essential to establish an international uniform rules as soon as possible in order to activate the international businesses with on-line basis. Thus this author hopes that this paper will contribute to the clear understanding to the scope of application of Preliminary Draft Convention for which the UNCITRAL is under working.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.180-185
• /
• 2013

In this study, preliminary design of human powered aircraft was performed by considering the aerodynamic performance. For this, overall weight including the aircraft and pilot was determined. Then, the main wing and horizontal/vertical tail were designed with appropriate selection of the airfoils and planform shapes. Based on these, three dimensional flow was calculated to obtain lift and drag coefficients and the position of center of gravity (CG). Consequently, it was shown that the lift and power of the aircraft satisfied the constraints of the minimum required lift and the pilot's available power. Also, the CG of the aircraft was located at aerodynamic center (AC) of the main wing, which guaranteed 26% of the static margin.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.324-327
• /
• 2008

Two stage startup of high thrust liquid rocket engine can reduce the abrupt impulse to the vehicle and engine by changing oxidizer flow rate to the combustion chamber. Also it ensures stable ignition of combustion chamber against hard start and to prevent pump stall by the sudden supply of large mass flow rate. However high discharge pressure of oxidizer pump or temperature rise in gas generator may be a problem in applying the preliminary stage. To solve this problem, we analyzed the effect of the slope of oxidizer pump's head curve and the oxidizer mass flow rate to combustion chamber during preliminary stage using the rocket engine startup analysis code. A moderate slope(${\circleddash}{\sim}$-3) of head curve and 80% mass flow rate during preliminary stage can reduce the oxidizer pump discharge pressure by 15 to 20% comparing with the condition of ${\circleddash}$=-4.37 head curve and 70% mass flow rate. Also it can maintain the turbine inlet temperature rise within 50K from the nominal value.