• Computers and Concrete
• /
• v.30 no.5
• /
• pp.357-367
• /
• 2022

In this paper, we propose an efficient control method that can be transformed into a general building control problem for building structure control using these reliability criteria. To facilitate the calculation of controller H∞, an efficient solution method based on Linear Matrix Inequality (LMI) is introduced, namely H∞-based LMI control. In addition, a self-tuning predictive grey fuzzy controller is proposed to solve the problem caused by wrong parameter selection to eliminates the effect of dynamic coupling between degrees of freedom (DOF) in Self-Tuning Fuzzy Controllers. We prove stability using Lyapunov's stability theorem. To check the applicability of the proposed method, the proposed controller is applied and the control characteristics are determined. The simulation assumes system uncertainty in the controller design and emphasizes the use of acceleration feedback as a practical consideration. Simulation results show that the performance of the proposed controller is impressive, stable, and consistent with the performance of LMI-based methods. Therefore, an effective control method is suitable for seismic reinforcement of civil buildings.

• Korean Journal of Community Nutrition
• /
• v.14 no.4
• /
• pp.462-473
• /
• 2009

The purpose of this study is to analyze the accuracy of predictive equations for resting metabolic rate (RMR) in Korean college students. Subjects were 60 healthy Korean college students (30 males, 30 females) aged 18-25 years. RMR was measured by indirect calorimetry. Predicted RMRs were calculated using the Harris-Benedict, Schofield (W)/(WH), FAO/ WHO/UNU(W)/(WH), Owen, Mifflin, Cunningham, Liu, IMNA and Henry (W)/(WH) equations. The accuracy of the equations was evaluated on basis of accurate prediction (the percentage of subjects whose RMR was predicted within 90% to 110% of the RMR measured), mean difference, RMSPE, mean % difference, limits of agreement of Bland- Altman method between predicted and measured RMR. Measured RMR of male and female students were $1833.4{\pm}307.4kcal/day$ and $1454.3{\pm}208.0kcal/day$, respectively. All predictive equations underestimated measured RMR. Of the predictive equations tested, the Harris-Benedict equation (mean difference: -80.4 kcal/day, RMSPE: 236 kcal/day, mean % difference: -3.1%) was the most accurate and precise, but accurate prediction of the equation was only 42%. Thus, this study suggests that the ethnicity-specific predictive equation from Korean people should be developed to improve the accuracy of predicted RMR for Koreans. (Korean J Community Nutrition 14(4) : 462${\sim}$473, 2009)

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.12-18
• /
• 2001

In this paper, we propose the Recurrent Neural Predictive HMM (RNPHMM). The RNPHMM is the hybrid network of the recurrent neural network and HMM. The predictive recurrent neural network trained to predict the future vector based on several last feature vectors, and defined every state of HMM. This method uses the prediction value from the predictive recurrent neural network, which is dynamically changing due to the effects of the previous feature vectors instead of the stable average vectors. The models of the RNPHMM are Elman network prediction HMM and Jordan network prediction HMM. In the experiment, we compared the recognition abilities of the RNPHMM as we increased the state number, prediction order, and number of hidden nodes for the isolated digits. As a result of the experiments, Elman network prediction HMM and Jordan network prediction HMM have good recognition ability as 98.5% for test data, respectively.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1458-1469
• /
• 2018

This paper proposes a novel common-mode voltage (CMV) elimination (CMV-EL) method based on model predictive control (MPC) to eliminate CMV for three-level T-type inverters (3LT2Is). In the proposed MPC method, only six medium and one zero voltage vectors (VVs) (6MV1Z) that generate zero CMV are considered as candidates to perform the MPC. Moreover, the influence of dead-time effects on the CMV of the MPC-based 6MV1Z method is investigated, and the candidate VVs are redesigned by pre-excluding the VVs that will cause CMV fluctuations during the dead time from 6MV1Z. Only three or five VVs are included to perform optimization in every control period, which can significantly reduce the computational complexity. Thus, a small control period can be implemented in the practical applications to achieve improved grid current performance. With the proposed CMV-EL method, the CMV of the $3LT^2Is$ can be effectively eliminated. In addition, the proposed CMV-EL method can balance the neutral point potentials (NPPs) and yield satisfactory performance for grid current tracking in steady and dynamic states. Simulation and experimental results are presented to verify the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.754-759
• /
• 1993

An adaptive model predictive control (AMPC) strategy using auto-regression moving-average (ARMA) models is presented. The characteristic features of this methodology are the small computer memory requirement, high computational speed, robustness, and easy handling of nonlinear and time varying MIMO systems. Since the process dynamic behaviors are expressed by ARMA models, the model parameter adaptation is simple and fast to converge. The recursive least square (RLS) method with exponential forgetting is used to trace the process model parameters assuming the process is slowly time varying. The control performance of the AMPC is verified by both comparative simulation and experimental studies on distillation column control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.27.2-27
• /
• 2001

This paper proposes a receding horizon predictive control (RHPC) for nonlinear time-delay systems. The control law is obtained by minimizing finite horizon cost with a terminal weighting functional. An inequality condition on the terminal weighting functional is presented, under which the closed-loop stability of RHPC is guaranteed, A special class of nonlinear time-delay systems is introduced and a systematic method to find a terminal weighting functional satisfying the proposed inequality condition is given for these systems. Through a simulation example, it is demonstrated that the proposed RHPC has the guaranteed closed-loop stability for nonlinear time-delay systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.150.3-150
• /
• 2001

Requirements for Distributed Monitoring and Control Networks (DMCN) differ greatly from those of typical data networks. Specifically, any DMCN technology which employs a fieldbus protocol is different from If network protocol TCP/IP. In general, one needs to integrate fieldbus protocol and TCP/IP to realize DMCN over IP network or internet Interoperability between devices and equipments is essential to enhance the quality and the performance of predictive maintenance (PM). This paper suggests a basic framework for LonWorks-based DMCN over IP network and a method to guarantee interoperability between devices and equipments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.359-359
• /
• 2000

Generally, level control in the steam generator of a nuclear power plant is difficulty process control, because the low power operating can lead nonminimum phase characteristics(swell and shrink phenomenon) and flow measurement are unreliable and nonlinear characteristics. This paper presents a framework for solving this problem based on the constrained linear model predictive control and introduces the design of method for the level of the controller in the entire operating power of the steam generator, and compares with conventional PI controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.344-344
• /
• 2000

Recently, the demand for high precision and large stroke in linear positioning systems is increasing in industry. A coarse-fine position control system composed of a linear motor and a piezoelectric actuator has such characteristics. Many optimal control laws have been applied to the position control of coarse-fine actuators but most of them did not take account into constraints. In this study, model predictive control (MPC) method with constraints is applied to the position control of the coarse-fine actuator and the performance of MPC is compared with those of conventional control laws.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.263-264
• /
• 2007

This paper presents a model predictive controller for tracking control of the wheeled mobile robots (WMRs) subject to nonholonomic constraint. The input-output feedback-linearization method and the mode transformation are used. The performance of the proposed control algorithm is verified via computer simulation. It is shown that the control strategy is feasible.