• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.253-268
• /
• 2020

In this study, recharge rates are estimated using SWAT-K (a distributed hydrological model). The validity of the estimated recharge rates were evaluated by employing the baseflow separation method based on observed hydrological data. The exploitable groundwater is typically determined as the 10-year drought frequency recharge rate that is calculated by average recharge ratio multiplied by 10-year drought frequency precipitation. In practice, however, recharge rates typically decrease in line with precipitation; therefore, exploitable groundwater could be overestimated when average recharge rates are used without considering precipitation. To resolve this overestimation, exploitable groundwater was calculated by re-estimating recharge rates that consider precipitation intensity. By applying this method to the Uiwang, Gwacheon, and Seongnam sub-basins, the exploitable groundwater decreased by 55.5~77.6%, compared with recharge rates obtained using the existing method.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.1
• /
• pp.21-29
• /
• 2019

This study analyzed the variability of drought risk based on trend analysis of dry-seasonal dam inflow located in upper river basins. To this, we used areal averaged precipitation and dam inflow of three upper river dams such as Soyang dam, Chungju dam, and Andong dam. We employed Mann-Kendall trend analysis and change point detection method to identify the significant trends and changing point in time series. Our results showed that significant decreasing trends (95% confidence interval) in dry-seasonal runoff rates (= dam inflow/precipitation) in three-dam basins. We investigated potential causes of decreasing runoff rates trends using changes in potential evapotranspiration (PET) and precipitation indices. However, there were no clear relation among changes in runoff rates, PET, and precipitation indices. Runoff rate reduction in the three dams may increase the risk of dam operational management and long-term water resource planning. Therefore, it will be necessary to perform a multilateral analysis to better understand decreasing runoff rates.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.3
• /
• pp.206-214
• /
• 1999

The effect of cooling rate on carbide precipitation during quenching of austenitic manganese steel was investigated by optical microscopy, image analyzer and numerical analysis. A computer program based on the finite difference method for analyzing heat treatment processes was developed in order to evaluate cooling rates and the possibility of carbide precipitation during quenching. The area ratio of carbide precipitated in the austenite matrix was measured by the image analyzer, and used to determine the critical point of carbide precipitation. Temperature-dependent critical cooling rates at the critical points were calculated using the present simulation program, The calculated results showed a good agreement with the experimental ones.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.200-204
• /
• 2012

In engineering hydrology, an estimation of precipitation loss is one of the most important issues for successful modeling to forecast flooding or evaluate water resources for both surface and subsurface flows in a watershed. An accurate estimation of precipitation loss is required for successful implementation of rainfall-runoff models. Precipitation loss or hydrological abstraction may be defined as the portion of the precipitation that does not contribute to the direct runoff. It may consist of several loss elements or abstractions of precipitation such as infiltration, depression storage, evaporation or evapotranspiration, and interception. A composite loss rate model that combines four loss rates over time is derived as a lumped form of a continuous time function for a storm event. The composite loss rate model developed is an exponential model similar to Horton's infiltration model, but its parameters have different meanings. In this model, the initial loss rate is related to antecedent precipitation amounts prior to a storm event, and the decay factor of the loss rate is a composite decay of four losses.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.6
• /
• pp.37-45
• /
• 2018

The source of Chusan Spring water in the Ulleungdo is the precipitation in the Nari caldera basin, which permeates in the Trachitic pumice and tuff area and moves downward, outflowing at the lithologic boundary between the trachyte and Nari tuff. It is known that the discharge rate of the Chusan Spring is large enough to be used for the small hydroelectric power generation, but the exact discharge rate and hydrogeologic characteristics have not been known. The discharge rates of the Spring were measured 11 times, which ranged from $15,220m^3/d$ to $36,278m^3/d$. The discharge rates, measured by the automatic level recorder, for two-year period, were $20,000{\sim}38,000m^3/d$. The variation of discharge rates did not coincide with rainfall event, but showed daily increases of $3,000{\sim}5,000m^3/d$. The annual discharge rate excluding the evapotranspiration and the surrounding stream discharge corresponded to 70.6% of the annual precipitation of the recharge area. Therefore, meteorological observations at the Nari basin, rather than the Ulleung-do meteorological station, are more appropriate to properly interpret the discharge characteristics of the Chusam Spring and the recharge rate of the basin.

• Economic and Environmental Geology
• /
• v.48 no.5
• /
• pp.371-377
• /
• 2015

Isotopic compositions of precipitation have been used to understand moisture transport in the atmosphere and interactions between precipitation and groundwater. Isotopic compositions of speleothems and ice cores, so called, ''paleoarchives'', can be utilized to interpret climate of the past and global circulation models (GCMs). The GCMs are able to explain the paleoarchives, can be validated by the precipitation isotopes. The developments of stable isotope analyzers make high-resolution isotopic studies feasible. Therefore, a high-resolution study of precipitation isotopes is needed. For this study, precipitation samples were collected for every 5 to 15 minutes, depending on precipitation rates, using an auto-sampler for precipitation isotopes near coastal area. The isotopic compositions of precipitation range from -5.7‰ (-40.1‰) to -10.8‰ (-74.3‰) for oxygen (hydrogen). The slope of ${\delta}^{18}O-{\delta}D$ diagram for the whole period is 6.8, but that of each storm is 5.1, 4.2, 7.9 and 7.7, respectively. It indicates that evaporation occurred during the first two storms, while the latter two storm did not experience any evaporation. The isotopic fractionations of precipitation has significant implications for the water cycle and high-resolution data of precipitation isotopes will be needed for the future studies.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5299-5303
• /
• 2014

Background: To explore etiology for providing scientific clues for the prevention of lung cancer. Materials and Methods: Data for lung cancer incidence and meteorological geographic factors from 25 counties in Zhejiang province of China during 2011 were studied. Stepwise multiple regression and correlation analysis were performed to analyze the geographic distribution and epidemiology of lung cancer. Results: 8,291 new cases (5,998 in males and 2,293 females) of lung cancer during 2011 in Zhejiang province were reported in the 25 studied counties. Reported and standardized incidence rates for lung cancer were 58.0 and 47.0 per 100,000 population, respectively. The incidence of lung cancer increased with age. Geographic distribution analysis shows that the standardized incidence rates of lung cancer in northeastern Zhejiang province were higher than in the southwestern part, such as in Nanhu, Fuyang, Wuxing and Yuyao counties, where the rates were more than 50 per 100,000 population. In the southwestern Zhejiang province, for instance, in Yueqing, Xianju and Jiande counties, the standardized incidence rates of lung cancer were lower than 37 per 100,000 population. Spearman correlation tests showed that forest coverage rate, air quality index (AQI), and annual precipitation level are associated with the incidence of lung cancer. Conclusions: Lung cancer in Zhejiang province shows obvious regional differences. High incidence appears associated with low forest coverage rate, poor air quality and low annual precipitation. Therefore, increasing the forest coverage rate and controlling air pollution may play an important role in lung cancer prevention.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.542-544
• /
• 2007

In this study, several methods to convert rain rate data for various time intervals to one-minute rates are compared. High-resolution tipping bucket precipitation records for seven locations in a tropical region are analyzed and compared using these conversion models. The Segal, Chebil, and Burgueno methods give the smallest average errors below 10% at different integration times.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.693-697
• /
• 1990

TIACA has two different side groups(ligands) as iso-propoxy groups and acetylacetonate groups. These two side groups have different hydrolysis rates. The two different rates of hydrolysis confer unique properties on TIACA, which are stability in aqueous solution and easy preparation of TiO2 and its multi components gels without precipitation. Their hydrolysis rates were monitored with I.R. and U.V. spectrophotometer.

• Clean Technology
• /
• v.29 no.4
• /
• pp.327-332
• /
• 2023

This study investigated synthesis gas production via steam reforming of biogas. Ni-Al₂O₃ and Ni-CeO₂ catalysts were synthesized using the co-precipitation method, with controlled precipitation agent injection rates. Catalytic performances were tested at various temperatures, with a gas composition ratio of CH₄:CO₂:H₂O = 1:0.67:3 and a gas hourly space velocity (GHSV) of 647,000 mL h^-1 gcat^-1. The rate of precipitation agent injection influenced the characteristics of the catalysts depending on the type of support used. As the temperature increased, both the CO₂ reforming of methane and the reverse water gas shift reactions occurred. The Ni-Al₂O₃ catalyst, synthesized with a single injection of the precipitation agent, exhibited the best catalytic activity under conditions with sufficient steam supply among the prepared catalysts, due to its high Ni dispersion.