• Journal of the Korean earth science society
• /
• v.29 no.6
• /
• pp.495-505
• /
• 2008

The main purposes of this study are to: (1) to develop astronomy observation program based on a standardized coefficient decision program; and (2) to apply the developed program to after-school or club activities. As a first step, we analyzed activities related to astronomy in the authorized textbooks that are currently adopted in high schools. based on the analysis, we developed an astronomy observation program according to the standardized coefficient decision program, and the program was applied to students' astronomical observations as part of the club activities. Specifically, this program used a 102 mm refracting telescope and digital camera. we took into account the observation site's environment of the urban areas in which many school were located and then developed a the computer program for observation activities. The results of this study are as follows. First, the current astronomical education in schools was based off of the textbooks. Specifically, it was mostly about analyzing the materials and making simulated experiments. Second, most schools participated in this study were located in urban areas where students had more difficulty in observation than in rural areas. Third, an exemplary method was investigated in order to make an astronomical observation efficiently in urban areas with the existing devices. In addition, the standardized coefficient decision program was developed to standardize the magnitude of stars according to the observed value. Finally, based on the students' observations, we found that there was no difference between the magnitude of a star in urban sites and in rural sites. The current astronomical education in schools lacks an activity of practical experiments, and many schools have not good observational sites because they are located in urban areas. However, use of this program makes it possible to collect significant data after a series of standardized corrections. In conclusion, this program not only helps schools to create an active astronomy observation activity in fields, but also promotes students to be more interested in astronomical observation through a series of field-based activities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.1
• /
• pp.89-93
• /
• 2011

This study was conducted to investigate the proteolysis and extraction conditions of deer antler for application of food materials. ProteAX (A) was the most effective enzyme for proteolysis of deer antler and the proteolysis condition was 0.5% (w/w) for enzyme concentration and 5 hr for proteolysis time. The effect of mixing enzyme ProteAX (A)+KFEN 2 (C) treatment in $60^{\circ}C$, 5 hr was investigated; soluble solid and protein content were the highest with A 0.5% (w/w) and B 0.5% (w/w) concentration. Result for DAH (deer antler hydrolysate) and DA (deer antler) prepared with extraction in $95^{\circ}C$ atmospheric pressure (AP, 6~18 hr) and extraction under $120^{\circ}C$ pressure condition (UP, 15~60 min) after hydrolysis on preceding established condition descriptions indicated that difference in pH according to enzyme treatment and extraction conditions was not significant. Sugar content of DA was $1.5^{\circ}Brix$, DA-UP (under pressure) and DAH-AP (atmospheric pressure) were $2.2^{\circ}Brix$; the highest sugar content of $2.7^{\circ}Brix$ was observed in DAH-UP for 60 min extraction. Also total free sugar, crude protein and collagen content were the highest in DAH-UP for 60 min recording at 1.97%, 742.7 mg/100 g and 498.8 mg/100 g, respectively. From these results, deer antler hydrolysate prepared with extraction under pressure was the most effective for functional characteristics enhancement. Hereafter, various practical uses of materials with enhanced characteristics of antler is expected.

• Journal of The Korean Association For Science Education
• /
• v.19 no.3
• /
• pp.409-427
• /
• 1999

The aim of this study was to illustrate how STS-related ideas in science education have been developed historically in the context of British education, particularly focused on the period of the 19th century and the first half of the 20th century. It has been hardly considered that the basic ideas of the STS education, one of the two paradigms of current science education together with constructivism, can be traced back to the beginning of the school science education itself. far beyond some of the programs which are largely regarded as the first-developed STS programs in Britain, such as Science in Society and SISCON. The movement of Mechanics' Institute during the first half of the 19th century would be the first systematic attempt to bridge the gap between the knowledge of pure science and its practical applications, although the main target was working-class adults rather than school pupils. At the end of the first half of the 19th century, this application-focused approach of science teaching was echoed in the elementary schools by Richard Dawes, one of the early experimenters of school science. The second half of the century was in large the period of the establishment of science as one of the core elements of school curriculum, mainly by emphasizing the aspect of pure science as a means for mental training. During this period, the elements of STS education-related appeared in the subject called 'Object Lesson' in elementary schools which was practically a separate subject from those of science. After the turn of the century, triggered by the experience of World War I, the growing appreciation of the impacts of science upon society and of the necessity of the teaching of science for wider audience gave a great impact towards two new main movements, i.e. for General Science and Citizen Science. The later illustrates a typical example of the STS movement in school science during the first half of the 20th century, particularly driven by the socialistic ideas towards the relation between science and society.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.337-341
• /
• 2014

Due to the nature of the ambient air temperature in summer in korea, the growth of crops in greenhouse normally requires cooling and dehumidification. Even though various cooling and dehumidification methods have been presented, there are many obstacles to figure out in practical application such as excessive energy use, cost, and performance. To overcome this problem, the lab scale experiments using lithium bromide(LiBr) solution and cooling coil for dehumidification and cooling in greenhouses were performed. In this study, preliminary experiment of dehumidification and cooling for the greenhouse was done using LiBr solution as the dehumidifying materials, and cooling coil separately and then combined system was tested as well. Hot and humid air was dehumidified from 85% to 70% by passing through a pad soaked with LiBr, and cooled from 308K to 299K through the cooling coil. computational Fluid Dynamics(CFD) analysis and analytical solution were done for the change of air temperature by heat transfer. Simulation results showed that the final air temperature was calculated 299.7K and 299.9K respectively with the deviation of 0.7K comparing the experimental value having good agreement. From this result, LiBr solution with cooling coil system could be applicable in the greenhouse.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.132-138
• /
• 2009

Studies on target motion in 4-dimensional radiotherapy are being world-widely conducted to enhance treatment record and protection of normal organs. Prediction of tumor motion might be very useful and/or essential for especially free-breathing system during radiation delivery such as respiratory gating system and tumor tracking system. Neural network is powerful to express a time series with nonlinearity because its prediction algorithm is not governed by statistic formula but finds a rule of data expression. This study intended to assess applicability of neural network method to predict tumor motion in 4-dimensional radiotherapy. Scaled Conjugate Gradient algorithm was employed as a learning algorithm. Considering reparation data for 10 patients, prediction by the neural network algorithms was compared with the measurement by the real-time position management (RPM) system. The results showed that the neural network algorithm has the excellent accuracy of maximum absolute error smaller than 3 mm, except for the cases in which the maximum amplitude of respiration is over the range of respiration used in the learning process of neural network. It indicates the insufficient learning of the neural network for extrapolation. The problem could be solved by acquiring a full range of respiration before learning procedure. Further works are programmed to verify a feasibility of practical application for 4-dimensional treatment system, including prediction performance according to various system latency and irregular patterns of respiration.

• Economic and Environmental Geology
• /
• v.38 no.5 s.174
• /
• pp.571-577
• /
• 2005

Permeable reactive barrier using iron oxide coated sand is one of effective technologies for As(V) contaminated groundwater. However, this method is restricted to As(III), because As(III) species tends to be more weakly bound to adsorbent. In order to overcome the limitation of iron oxide coated sand application to As(III) contaminated groundwater, manganese oxide materials as promoter of As(III) removal were combined to the conventional technology in this study. For combined use of iron oxide coated sand and manganese oxide coated sand, two kinds of removal methods, sequential removal method and simultaneous removal method, were introduced. Both methods showed similar removal efficiency over $85\%$ for 6 hrs. However, the sequential method converted the As contaminated water to acid state (pH 4.5), on the contrary, the simultaneous method maintained neutral state (pH 6.0). Therefore, simultaneous As removal method was ascertained as a suitable treatment technology of As contaminated water. Moreover, for more effective As(III) remediation technique, polypropylene textile which has the characteristics of high surface area, low specific gravity and flexibility was applied as alternative material of sand. The combined use of coated polypropylenes by simultaneous method showed much more prominent and rapid remediation efficiency over $99\%$ after 6 hrs; besides, it has practical advantages in replacement or disposal of adsorbent for simple conventional removal device.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.484-492
• /
• 2012

The present study aimed to investigate the effect of static magnetic field (SMF) on the growth and physiological characteristics of common indoor plant species. Five foliage plant species, Spathiphyllum spp., Ardisia pusilla DC., Syngonium podophyllum, Peperomia pereskiifolia, and Pilea cadierei were potted into plastic pot equipped with round type anisotropic sintered NdFeB permanent magnet inside the pot. The surface magnetic flux density of each magnet was 3,500 G. After 6 months of growth period, the biomass accumulations of Spathiphyllum, A. pusilla, and P. cadierei under SMF were statistically higher than those of controls. Tissue water content also increased under the influence of SMF in most species. The photosynthetic rate of Spathiphyllum under SMF significantly increased but other species showed no significant difference compared with control. Although there was no significant increase in the photosynthetic rates of A. pusilla, and P. cadierei, they showed remarkable increase in total fresh weight under SMF. This suggests that the demand of assimilates for normal metabolism could be decreased under magnetic influence and thereby biomass accumulation could be more favored. But this is not always true for all plant species because P. pereskiifolia in this experiment, showed no changes in both photosynthetic rate and biomass accumulation. Leaf nitrogen and chlorophyll contents were enhanced significantly in most plant species under influence of SMF. Chlorophyll a/b ratio also increased by SMF. Although there might be a limitation depending on plant species, these results suggest that long-term exposure to SMF might allow plant to have an enhanced acclimation capacity against environmental fluctuations and optimal application of SMF could increase the practical use of indoor plants such as an attempt to improve indoor air quality.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.81-101
• /
• 2011

In today's rapidly changing and increasingly competitive business environment, new product development in tune with market trends in a timely manner has been a matter of the utmost concern for all enterprises. Indeed, developing a sustainable new business has been a top priority for not only business enterprises, but also for the government policy makers accountable for the health of Its national economy as well as for decision makers in what type of organizations. Further, for a soft landing of new businesses, building a government-initiated industry base has been claimed to be necessary as a way to effectively boost corporate activities. However, the existing methodology in new service and new product development is not suitable for nurturing industry, because it is mainly focused on the research and development of corporate business activities instead of new product development. The approach for developing new business is based on 'innovation' and 'convergence.' Yet, the convergence among technologies, supplies, businesses and industries is believed to be more effective than innovation alone as a way to gain momentum. Therefore, it has become more important than ever to study a new methodology based on convergence in industrial quality new product development (NPD) and new service development (NDS). In this research, therefore, we reviewed any restrictions in the existing new product and new service development methodology and the existing business model development methodology. In doing so, we conducted industry standard collaboration analysis on a new service model development methodology in the private sector and the public sector. This approach is fundamentally different from the existing one in that ours focuses on new business development under private management. The suggested framework can be categorized into industry level and service level. First, in the industry level, we define new business opportunities In occurrence of convergence between businesses. For this, we analyze the existing industry at the industry level to identify the opportunities in a market and its business attractiveness, based on which the convergence industry is formulated. Also, through the analysis of environment and market opportunity at the industry level. we can trace how different industries are lined to one another so as to extend the result of the study to develop better insights into industry expansion and new industry emergence. After then, in the service level, we elicit the service for the defined new business, which is composed of private service and supporting service for nurturing industry. Private service includes 3steps: plan-design-do; supporting service for nurturing industry has 4 steps: selection-make environment- business preparation-do and see. The existing methodology focuses on mainly securing business competitiveness, building a business model for success, and offering new services based on the core competence of companies. This suggested methodology, on other hand, suggests the necessity of service development, when new business opportunities arise, in relation to the opportunity analysis of supporting service based on the clear understanding of new business supporting infrastructure optimization. Meanwhile, we have performed case studies on the printing and publishing field with the restrict procedure and development system to assure the feasibility and practical application. Even though the printing and publishing industry is considered a typical knowledge convergence industry, it is also known as a low-demand and low-value industry in Korea. For this reason, we apply the new methodology and suggest the direction and the possibility of how the printing and publishing industry can be transformed as a core dynamic force for new growth. Then, we suggest the base composition service for industry promotion(public) and business opportunities for private's profitability(private).

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.399-404
• /
• 1997

This paper is presenting a practical result of environmental manipulation effect on pine mushroom Tricholoma matsutake yield and a discussion of key factor seeking for improving pine mushroom production by analyzing the effects on mushroom yield for 10 years with applying five kinds of environmental control at the pine stands located in Namwon, Chollabuk-do, Korea. The environmental controls included density control and forest floor manipulations, and the treatments were applied during early summer of 1983. The mushroom yield itself did not show statistically significant differences among the treatments. But, we could manifest the treatment effects by calculating the relative yield in percent on the basis of pretreatment yield collected in 1982. The forest floor manipulation with density control may affect pine mushroom yield in short term, and continuous management should be applied to keep and improve the mushroom production. The fine root activity was the most important factor of pine mushroom production at the Namwon research site since the floor raking resulted in the largest effect on the mushroom yield although the environmental condition for the growth of fungi is important for pine mushroom production. In addition, the pine mushroom forest with sandy soils demands adequate litter layer since the litter removal showed relatively detrimental effects on pine mushroom yield compared to that in litter covered plot at the research site. That is, soil texture should be considered for forest floor manipulation, and it is reconfirmed that the environmental control to improve pine mushroom production should be applied differently by each region.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.64-74
• /
• 2010

The study is based on an urban park design that is designed in consideration of the characteristics of Uijeongbu City, applied with adequate functions for the environment and showcasing the unique scenery in relation to the relocation of the US Air Force Camp Falling Water. The bases of the design are: the reasonable convergence of the square and park in consideration of the site characteristics; the application of an urban context as the park is located near a station; and the realization of an eco-friendly space. This study is based on foundation research regarding a review of urban square patterns, particular items in planning in relation to modern urban parks and the adaptability of the park in the future. Regarding space usage, the design is applied with notable ideas that allow the space to make its own characteristics through voluntary user activity in conjunction with the environment that will allow the park to cope with changes in the future, as opposed to a space that users experience through pre-determined programs. Below are the focal points of the design. First, the park is designed as an empty space which may accommodate the urban structural context of and usage patterns for being a field of the city ecology that changes and develops, beyond a passively-created square pattern. Such open spaces have a continuity which allows it to adapt to the development of the city. In addition, the design facilitates spontaneous processes through changes in usage pattern and time. Second, the design includes the message that the park and the city, natural things and artificial things, must communicate and network with each other. Hence the park shall not be an isolated green island within the city, but is an open space accommodating the demands for open area from nearby commercial, public and residential facilities; the park shall include a field that can accommodate a variety of programs. Third, the park is designed to encourage the effect of direct and indirect practical education by reflecting a physical plan as well as interesting experience design methods to lower carbon emissions and to create and maintain an eco-friendly space, the basis of a zero-emissions city.