• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.133-134
• /
• 2011

While researches related with construction automation have dramatically increased, a Robot-based Automatic Construction system (RCA system) has developed for high-rise buildings in Korea. At the aspect that wide adoption of the RCA system is dependent on economic efficiency comparing with a conventional method, feasibility study on the RCA system should be implemented. However, due to practical limitations, the RCA system has tested to a seven story building. Based on the test results, this study implements a cost/benefits analysis to a simulated forty story building in order to derive more reliable data on the RCA system's practicability.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.451-454
• /
• 2002

In the present paper, the practicability of Commentray on Wind Loads of Korean Standard Design Loads fur Buildings, which has been enacted in Minstry of Construction and Transportation in June 2000, is validated by using the meteorological data measured at Homi-Cape, Pohang. Assuming that the vertical wind profile follows the power-law in a quasi-steady state, wind profile exponents are calculated by seasons by using wind data as collected through four monitoring towers. According to the Commentray on Wind Loads, Pohang is classified with its exposure category being B and the wind profile exponent being 0.22, while it is identified that the average wind profile exponent as calculated in this study is 0.26. Also, in this paper, a cross-correlation method is suggested in order to identify any meteorological correlation between measurement sites quantitatively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3224-3242
• /
• 2020

Internet of Things (IoT) networks composed of a large number of sensors and actuators generate a huge volume of data and control commands, which should be enforced by strong data reliability. The end-to-end data reliability of IoT networks is an essential industrial enabler. Blockchain technology can provide strong data reliability and integrity within IoT networks. We designed a lightweight end-to-end blockchain network that applies to common IoT applications. Its enhanced modular architecture and lightweight consensus mechanism guarantee its practical applicability for general IoT applications. In addition, the proposed blockchain network is highly software compatible because it adopts the Hyperledger development environment. Directly embedding the proposed blockchain middleware platform in small computing devices proves its practicability.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권1호
• /
• pp.51-55
• /
• 2017

LINE, an instant message App with a powerful capability of transmitting various forms of data, has been overwhelmed in Asia since launched in 2011. Due to its popularity, LINE was first used in the 2016 Taiwanese presidential election. This research utilized a functional approach of campaign communication discourse and political visual images to analyze how candidates managed and presented themselves by textual and visual information on LINE. Regarding the textual information, results revealed their strategy inclined to reverse gender stereotype because the female candidate emphasized policy over character, while the male emphasized character over policy. Both candidates did not fully employ ten image functions because they utilized mostly the emotional and image building functions. The female candidate message achieved the largest total amount of 'like' and 'share'. This study probes into the App campaigning and improve the feasibility and practicability to share knowledge of political communication by new media.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.971-977
• /
• 1998

For the purpose of standardization and practicability of nautral dyeing, the mordanting and dyeing properties of Rhusjara ica was studied. Appropriate extraction, dyeing and mordanting condition of Rhusjara ica were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The most absorbance of Rhusjara ica solution was 299 nm. The color of Rhusjara ica solution was affected by pH 8~9. The optimum temperature to extract Rhusjara ica was 6$0^{\circ}C$ and dyeing solution for 1 hour. Effective dyeing time to silk was 60min. Effective mordanting temperature was 80~10$0^{\circ}C$, and its time was 30 min. K/S value of dyeing fabrics was recoginazed by mordanting treatment, specially Fe, Al, Cu. K/S value of pre-mordanting was higher than post-mordanting. In the case of Rhusjara ica fastness was increased by mordanting treatment.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제24권1호
• /
• pp.79-84
• /
• 2020

In this article, we implement a recently developed fast Monte Carlo simulation (MCS) for pricing equity-linked securities (ELS), which is most commonly issued autocallable structured financial derivative in South Korea, on the mobile platform. The fast MCS is based on Brownian bridge technique. Although mobile platform devices are easy to carry around, mobile platform devices are slow in computation compared to desktop computers. Therefore, it is essential to use a fast algorithm for pricing ELS on the mobile platform. The computational results demonstrate the practicability of Android application implementation for pricing ELS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.5209-5228
• /
• 2015

According to the characteristics of adaptive JPEG steganography which determines the changed DCT coefficients based on embedding distortion, a new steganalysis method by selecting the DCT coefficients with small distortion values is proposed. Firstly, the principle of adaptive JPEG steganography through minimizing distortion is introduced. Secondly, the practicability of selecting the changed DCT coefficients according to distortion values is studied. Thirdly, the proposed steganalysis method is given and the embedding sensitivity of the steganalysis feature extracted from the selected DCT coefficients is analyzed. Lastly, the implement processes of the proposed method are presented and analyzed in details. In the experiments, PQt, PQe and J-UNIWARD steganography are used as examples to verify the effect of the proposed steganalysis method for adaptive JPEG steganography. A serial experimental results show the detection accuracy can be improved obviously, especially when the payload is relatively low.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.56-63
• /
• 2008

Many advanced nations have been developing the next generation logistic systems to effectively deal with gradually increased logistic flows over the world. Particularly, dual mode trailer(DMT) systems are significantly focused as a new alternative transportation which basically provides integrating of the land and railroad services. This paper presents new driving mechanism for DMT systems using the hydraulic pressure cylinder systems. Such is mechanically composed of supporting and rotating parts independently, which are mostly important for whole system performance. We analyze feasible operational problem occurred in driving mechanism from the conventional DMT systems and compare our proposed deign specification with the Modalohr DMT system to demonstrate its reliability and practicability.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.430-435
• /
• 1997

This paper presents the material properties and production of 1400kg/$\textrm{cm}^2$ ultra high-strength concrete in consideration of the history of hydration temperature for the practical utilization. A series of laboratory tests were conducted to optimize the mix proportion and then the full-scall mock up tests were performed to investigate the practicability. The thermal sensors were installed prior to concrete casting into the walls and columns, to measure the hydration temperature during the hardening process, which is inevitable to select the most appropriate curing scheme.

• 전자공학회논문지C
• /
• 제34C권8호
• /
• pp.39-48
• /
• 1997

The fast redundancy identification is required to perform an efficient test pattern genration. Due to the reconvergent fanouts which make the dependency among objectives and the fault propagation blocking, there may exist redundnat faults in the cirucit. This paper presents the isomorphism identification and the pseudo dominator algorithms which are useful to identify redundant faults in combinational circuits. The isomorphism identification algorithm determines whether mandatory objectives required for fault detection cannot be simultaneously satisfied from primary input assignments or not using binary decision diagrma. The pseudo dominator algorithm determines whether faults propagation is possible or not by considering all paths at a given fanout node. Several experiments using ISCAS 85 benchmark circuits demonstrate the efficiency and practicability of the algorithms.