• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.20-26
• /
• 2016

This paper presents an X-band two-stage power amplifier using GaN-HEMT. Two-stage structure was adopted to take its high gain and simple inter-stage matching network. Based on a 3D EM simulation, the bond-wire inductance and the parasitic capacitance were predicted. By reducing bond-wire inductance, Q of the matching network is decreased and the bandwidth is improved. The implemented two-stage PA shows a power gain of more than 16 dB, saturated output power of more than 42.5 dBm, and a efficiency of more than 35 % in frequency range of 8.1~8.5 GHz with an operating voltage of 40 V.

• Journal of Navigation and Port Research
• /
• v.29 no.7
• /
• pp.615-618
• /
• 2005

A new structure of the Wilkinson power divider that can suppress multiple harmonics output is presented The power divider consists of T-type or $\pi$-type capacitive loads and shunt resistors. Experimental results show that this power divider suppresses the second and the third harmonic components to less than -38dB, while maintaining the characteristics of a conventional Wilkinson power divider, featuring an equal power split, a simultaneous impedance matching at all ports and a good isolation between output ports.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.273-277
• /
• 2003

This paper presents a structure of the Wilkinson power divider that can suppress the 9ea harmonic output. The power divider consists of ${\lambda}/4n$ open stubs, which are located at the $3{\lambda}/4$ branches and parallel connection of resistor which shunts the output ports. Experimental results show that this power divider suppresses from 1st to 9th harmonic components to less than -37dB, while maintaining the characteristics of a conventional Wilkinson power divider; featuring an equal power split, a simultaneous impedance matching at all ports and a good isolation between output ports. these results agree quite well with the simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.11
• /
• pp.1034-1046
• /
• 2013

In this paper, a design of a GaN HEMT power amplifier using output matching circuit with arbitrary harmonic impedances is presented. The adopted GaN HEMT device, TGF2023-02 of TriQuint Semiconductor, was packaged in commercial package. The optimal impedances of the GaN HEMT package are extracted from load-pull simulation at package input and output reference planes. The targets of load-pull simulation are the highest output power at fundamental frequency and the highest efficiency at $2^{nd}$ and $3^{rd}$ harmonic frequencies. Because of fixture in the package, the extracted impedances shows arbitrary harmonic impedances. In order to match the optimal impedances, output matchin circuit which has 4 transmission lines is presented. Characteristic impedances and electrical lengths of the transmission lines are mathmatically calculated. The power amplfiier with $54.6{\times}40mm^2$ shows the output power of 8 W at the fundamental frequency of 2.5 GHz, the efficiency above 55 %, and harmonic suppression of above 35 dBc at the $2^{nd}$ and the $3^{rd}$ harmonics.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.554-557
• /
• 2013

This letter presents a power amplifier (PA) with an on-chip power detector for 2.4-GHz wireless local area network application. The power detector consists of a clamp circuit, a diode detector, and a coupled line directional coupler. A series inductor for an output matching network in the PA is combined with a through line of the coupler, which reduces the coupling level. Therefore, the coupler employs a metamaterial-based transformer configuration to increase coupling. The amount of coupling is increased by 2.5 dB in the 1:1 symmetric transformer structure and by 4.5 dB from two metamaterial units along the coupled line.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.503-506
• /
• 2003

The photovoltaic generators have a nonlinear V-I characteristics and maximum power points which vary with the illumination levels and temperatures. Using maximum power point tracker with the intermediate converter can increase the system efficiency by matching the PV systems to the load. A novel MPPT control for photovoltaic system is proposed. The system input parameters are (dP, dI, and last incremental of duty ratio $L\deltaD$)and the output is the new incremental value (new ${\deltaD}$) according to the maximum power point under various illumination levels. Using fuzzy logic controller allows extracting the maximum power rapidly and without significant oscillations. Also FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve control system.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.454-460
• /
• 2019

In this paper, a watt-level 2.4-GHz RFCMOS linear power amplifier (PA) with pre-distortion method using variable capacitance with respect to input power is demonstrated. The proposed structure is composed of a power detector and a MOS capacitor to improve the linearity of the PA. The pre-distortion based linearizer is embedded in the two-stage PA to compensate for the gain compression in the amplifier stages, it also improves the output P1dB by approximately 1 dB. The simulation results demonstrate a 1-dB gain compression power of 30.81 dBm at 2.4-GHz, and PAE is 29.24 % at the output P1dB point.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.50-59
• /
• 2016

This work shows that the design and test results of a power amplifier(PA) with broadband and high linearity for 4G applications in $0.11{\mu}m$ CMOS process. A 1:2-transformer is designed for load impedance matching of PA and a inter-stage matching is implemented for a linearity. A designed PA achieves more than 27.3 dBm of linear output power and 26.1 % of power-added efficiency(PAE) under an adjacent channel leakage ratio(ACLR) of -30 dBc for a LTE 16-QAM 10 MHz signal with a carrier frequency range of 1.8 to 2.3 GHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.49-54
• /
• 2021

In this paper, n this paper, E-polarized electromagnetic scattering problems by a resistive strip grating between a double dielectric layer are analyzed by applying the PMM(Point Matching Method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, and the resistive boundary condition is applied to analysis of the resistive strip. The numerical results for the normalized reflected and transmitted power are analyzed by according as the relative permittivity and thickness of the double dielectric layers, and the resistivity of resistive strip. Overall, when the resistivity of the resistive strip decreased or the relative permittivity of the dielectric layer increased, the reflected power increased, and as the reflected power increased, the transmitted power decreased relatively. Especially, as the relative permittivity of double dielectric layer increases, the minimum value of the variation curve of the reflected power shifted in the direction that the grating period decreased. The numerical results for the presented structure of this paper are shown in good agreement compared to those of the existing papers.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.238-245
• /
• 2016

There are technological, operational and environmental constraints at tactical edge, which are disconnected operation, intermittent connectivity, and limited bandwidth (DIL), size, weight and power (SWaP) limitations, ad-hoc and mobile network, and so on. To overcome these limitations and constraints, we use service-oriented architecture (SOA) based technologies. Moreover, the operation environment is highly dynamic: requirements change in response to the emerging situation, and the availability of resources needs to be updated constantly due to the factors such as technical failures. In order to use appropriate resources at the right time according to the mission, it needs to find the best resources. In this context, we identify ontology-based mission service model including mission, task, service, and resource, and develop capability-based matching in tactical edge environment. The goal of this paper is to propose a capability-based semantic matching for dynamic resource allocation. The contributions of this paper are i) military domain ontologies ii) semantic matching using ontology relationship; and (iii) the capability-based matching for the mission service model.