DOI QR코드

DOI QR Code

2.4-GHz Power Amplifier with Power Detector Using Metamaterial-Based Transformer-Type On-Chip Directional Coupler

  • Dang, Trung-Sinh (Department of Electronics and Radio Engineering, School of Electronics and Information, Kyung Hee University) ;
  • Tran, Anh-Dung (Department of Electronics and Radio Engineering, School of Electronics and Information, Kyung Hee University) ;
  • Lee, Bomson (Department of Electronics and Radio Engineering, School of Electronics and Information, Kyung Hee University) ;
  • Yoon, Sang-Woong (Department of Electronics and Radio Engineering, School of Electronics and Information, Kyung Hee University)
  • Received : 2012.08.13
  • Accepted : 2012.10.04
  • Published : 2013.06.01

Abstract

This letter presents a power amplifier (PA) with an on-chip power detector for 2.4-GHz wireless local area network application. The power detector consists of a clamp circuit, a diode detector, and a coupled line directional coupler. A series inductor for an output matching network in the PA is combined with a through line of the coupler, which reduces the coupling level. Therefore, the coupler employs a metamaterial-based transformer configuration to increase coupling. The amount of coupling is increased by 2.5 dB in the 1:1 symmetric transformer structure and by 4.5 dB from two metamaterial units along the coupled line.

Keywords

References

  1. W.-C. Hue et al., "High-Linearity and Temperature-Insensitive 2.4 GHz SiGe Power Amplifier with Dynamic-Bias Control," IEEE RFIC Symp., 2005, pp. 609-612.
  2. Q.Z. Hu et al., "A SiGe Power Amplifier with Power Detector and VSWR Protection for TD-SCDMA Application," Int. Conf. Mixed Design Integrated Circuits Syst., 2006, pp. 214-217.
  3. Y. H. Chow et al., "A 29dBm Linear Power Amplifier Module for IEEE 802.16e (WiMAX) and LTE Applications Using E-Mode pHEMT Technology," IEEE RFIC Symp., 2009, pp. 92-95.
  4. A. Pallotta et al., "Quad-Band GSM Silicon PA Module on LTCC Embedding a Coupler-Based RF Power Controller," IEEE Int. Microw. Symp., 2007, pp. 163-166.
  5. S.-W. Yoon and C.-W. Kim, "2.4 GHz WLAN InGaP/GaAs Power Amplifier with Temperature Compensation Technique," ETRI J., vol. 31, no. 5, Oct. 2009, pp. 601-603. https://doi.org/10.4218/etrij.09.0209.0089
  6. Y.-H. Chun et al., "High Directivity Directional Coupler Using Metamaterial," European Microw. Conf., 2006, pp. 329-331.
  7. T.-G. Kim and B. Lee, "Metamaterial-Based Wideband Rat-Race Hybrid Coupler Using Slow Wave Lines," IET Microw., Antennas, Propag., vol. 4, no. 6, June 2010, pp. 717-721. https://doi.org/10.1049/iet-map.2009.0109

Cited by

  1. A 60-GHz power amplifier design with on-chip tunable load-matching network and power detect in 90-nm CMOS : POWER AMPLIFIER DESIGN AND POWER DETECT vol.12, pp.1, 2013, https://doi.org/10.1002/tee.22354