• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.133-141
• /
• 2020

The use of high-gain-voltage step-up converters for distributed power generation systems is being popularized because of the need for new energy generation and power conversion technologies. In this study, a new constructed high-gain-boost DC-DC converter was proposed to coordinate low voltage output DC sources, such as PV or fuel cell systems, with high DC bus (380 V) lines. Compared with traditional boost DC-DC converters, the proposed converter can create higher gain and has wider input voltage range and lower voltage stress for power semiconductors and passive elements. Moreover, the proposed topology produces multilevel DC voltage output, which is the main advantage of the proposed topology. Steady-state analysis in continuous conduction mode of the proposed converter is discussed in detail. The practicability of the proposed DC-DC converter is presented by experimental results with a 300 W prototype converter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.309-312
• /
• 2002

In this paper, we discuss the design of high gain low noise amplifier by using the 0.2sum CMOS technology. A cascode inverter is adopted to implement the low noise amplifier. The proposed cascode inverter LNA is one stage amplifier with a voltage reference and without choke inductors. The designed 2.4GHz LNA achieves a power gain of 25dB, a noise figure of 2.2dB, and power consumption of 255㎽ at 2.5V power supply.

• 대한임상검사과학회지
• /
• 제45권2호
• /
• pp.60-65
• /
• 2013

Data from repeated measurements are accomplished through repeatedly processing the same subject under different conditions and different points of view. The power of testing enhances the choice of pertinent analysis methods that agrees with the characteristics of data concerned and the situation involved. Along with the clinical example, this paper compares the analysis of the variance on ex-post tests, gain score analysis, analysis by mixed design and analysis of covariance employable for repeating measure. Comparing the analysis of variance on ex post test, and gain score analysis on correlations, leads to the fact that the latter enhances the power of the test and diminishes the variance of error terms. The concluded probability, identified that the gain score analysis and the mixed design on interaction between "between subjects factor" and "within subjects factor", are identical. The analysis of covariance, demonstrated better power of the test and smaller error terms than the gain score analysis. Research on four analysis method found that the analysis of covariance is the most appropriate in clinical data than two repeated test with high correlation and ex ante affects ex post.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.319-326
• /
• 2019

The use of high-voltage gain converters is essential for distributed power generation systems with renewable energy sources, such as fuel and solar cells, due to their low-voltage characteristics. In this study, a novel high-voltage gain non-isolated buck boost converter topology is proposed to cope with the need of a high-voltage conversion ratio without the transformer for the renewable energy sources. Given that the proposed topology utilizes the cascode structure, the voltage gain and the efficiency are higher than those of other conventional non-isolated converters. To demonstrate the feasibility of the proposed topology, the operation principle is presented, and the steady-state characteristics are analyzed in detail. The validity of the proposed converter is verified by experiments with a 400 W prototype converter.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.853-856
• /
• 2021

In this paper, a low noise amplifier having high gain and low noise by using input and inter stage matching circuits has been designed. A current-reused two-stage common-source topology is adopted, which can obtain high gain and low power consumption. Deterioration of noise characteristics according to the source inductive degeneration matching is compensated by adopting additional matching circuits. Moreover trade-offs among noise, gain, linearity, impedance matching, and power dissipation have been considered. In this design, 0.18-mm CMOS process is employed for the simulation. The simulated results show that the designed low noise amplifier can provide high power gain and low noise characteristics.

• 전기전자학회논문지
• /
• 제14권4호
• /
• pp.257-262
• /
• 2010

본 논문에서는 5.25 GHz에서 넓은 이득 제어범위를 갖는 저전력 가변 이득 프론트-엔드를 설계하였다. 넓은 이득 제어범위를 갖기 위해, 제안된 저잡음 증폭에서는 가변이득 증폭기의 소스에 p-타입 트랜지스터를 연결하였다. 이 방법을 통해 증폭기의 바이어스 전류와 소스 임피던스를 동시에 조절할 수 있었다. 따라서 제안된 저잡음 증폭기는 넓은 이득 제어범위를 갖는다. 믹서에서는 입력 트랜스컨덕턴스단으로 p-타입 트랜지스터를 사용한 폴디드 구조가 제안되었다. 이 구조에서 믹서는 작은 공급 전압에서 각 단에 필요한 만큼의 전류만 흘려주기 때문에 저전력에서도 작동을 할 수 있다. 제안된 프론트-엔드는 최대 33.2 dB의 이득과 17 dB의 넓은 이득 제어범위를 갖는다. 이 때, 잡음지수와 IIP3는 각각 4.8 dB, -8.5 dBm을 갖는다. 이러한 동작을 하는 동안, 제안된 회로는 최대 이득상태에서 7.1 mW, 최소 이득상태에서 2.6 mW의 적은 전력을 소비한다. 시뮬레이션 결과는 TSMC $0.18\;{\mu}m$ CMOS 공정에서 Cadence를 이용하여 얻어졌다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.137-140
• /
• 2002

This paper is proposed a 8-bit anolog to digital converter for CMOS image sensor. A anolog to digital converter for CMOS image sensor is required function to control gain. Proposed anolog to digital converter is used frequency divider to control gain. At 3.3 Volt power supply, total static power dissipation is 8mW and programmable gain control range is 30dB. The gain control range can be easily increased with insertion of additional flip-flop at divided-by-N frequency divider circuit.

• ETRI Journal
• /
• 제25권6호
• /
• pp.531-534
• /
• 2003

This report describes the effect of optical delay on the suppression of the power transient excursion in a combined gain-controlled erbium-doped fiber amplifier with an internal optical feedback loop (OFL). A simple homogeneous model showed that the optical delay caused a phase change in the oscillation of the surviving and laser channels, which resulted in a reduction of the overall power transient excursion. In addition to the reduction, a real system with a 1528.7-nm OFL shifted the oscillation upward or downward according to channel removal or addition, whereas another one with a 1560.9-nm OFL did not. This different transient behavior reflected a control-wavelength dependence on optical automatic gain control, where spectral-hole burning dominated over relaxation oscillation for 1528.7 nm, and vice versa for 1560.9 nm.

• ETRI Journal
• /
• 제29권6호
• /
• pp.785-793
• /
• 2007

In this paper, we present an integrated rail-to-rail fully differential operational transconductance amplifier (OTA) working at low-supply voltages (1.5 V) with reduced power consumption and showing high DC gain. An embedded adaptive biasing circuit makes it possible to obtain low stand-by power dissipation (lower than 0.17 mW in the rail-to-rail version), while the high DC gain (over 78 dB) is ensured by positive feedback. The circuit, fabricated in a standard CMOS integrated technology (AMS 0.35 ${\mu}m$), presents a 37 V/${\mu}s$ slew-rate for a capacitive load of 15 pF. Experimental results and high values of two quality factors, or figures of merit, show the validity of the proposed OTA, when compared with other OTA configurations.

• 한국광학회지
• /
• 제5권2호
• /
• pp.291-297
• /
• 1994

Erbium첨가 광섬유 증폭기에서 증폭된 자연방출광(ASE) 출력의 일부를 대역투과 파장 필터를 거쳐 입력단으로 루프 귀환시켜 광증폭기를 특정 파장에서 발진시킴으로써 신호광에 대한 증폭 이득을 일정치에 고정시켰다. 증폭 이득과 ASE 출력 스펙트럼은 광증폭기가 발진하는한 입력광 power나 펌프광 power의 변화에 대하여 무관하였으며 귀환 루프의 손실에만 의존하였다. 또한 광증폭기에 저속으로 변조된 대신호가 입사하는 경우에도 이득포화에 의한 파형 왜곡없이 증폭이 가능하였다.