• 디지털융복합연구
• /
• 제10권11호
• /
• pp.47-58
• /
• 2012

본 연구는 Delphi 및 DEMATEL 기법을 활용하여 참여정부의 전시작전통제권(이후 전작권) 전환에 관한 정치 군사적 결정요인을 선정하고, 이들 결정요인간의 영향정도 및 관계를 정량적 정성적으로 분석하는데 있다. AHP를 활용한 기존 연구에서는 전작권 전환 결정요인을 학술자료와 현장실무경험을 바탕으로 선정하여, 요인선정에 대한 보다 객관적인 분석이 요구되었다. 본 연구를 위해 온라인 및 오프라인 환경에서 안보 관련 전문가 집단을 대상으로 일련의 설문을 실시하였다. 분석결과로 참여정부의 전작권 전환 결정요인은 크게 '군사주권의 회복', '평화통일을 위한 여건조성', '우리나라의 국력신장에 따른 국격 제고'로 AHP기법에 의한 기존연구와 대동소이하였으며, 전작권 전환 결정요인간의 영향 및 관계는 '군사주권 회복'과 '평화통일을 위한 여건조성'은 별개 사안으로 상호 연관성이 없고 '군사주권 회복'이라는 진보세력의 정치적 이익이 주된 결정요인이었던 것으로 나타났다. 본 연구는 Delphi 및 DEMATEL 기법을 적용하여 참여정부의 전작권 전환 결정요인에 대해 정략적 정성적 분석을 실시하였는데 의의가 있다.

• 융합정보논문지
• /
• 제8권5호
• /
• pp.11-17
• /
• 2018

본 연구는 독거노인의 자살영향요인에 영향을 미치는 요인을 파악하기 위해 시도 되었다. 본 연구는 K & C 지역에 거주하는 독거노인 175명을 대상으로 한 융합적 서술조사연구이며 자료는 SPSS/WIN 21.0을 이용하여 t-test, ANOVA, Pearson's correlation coefficients 산출 및 다중희귀분석을 실시하였다. 자료수집은 2017년 1월 부터 2017년 3월까지 였다. 본 연구결과는 다음과 같다. 자살생각은 사회활동(r=-.106, p<.05), 주관적 건강상태(r=-.292, p<.01), 자아존중감(r=-.069, p<.05), 자기통제감(r=-.201, p<.01)과 부적 상관관계를 보였고, 우울(r=.023, p<.01), 스트레스(r=.320 p<.05)는 자살과 양의 상관관계를 보였다. 또한 자살생각에 영향을 미치는 요인은 주관적 건강상태, 자아통제감, 사회활동 순으로 나타났고, 총 43.5%의 설명력을 나타났다. 독거노인의 자살을 예방하기 위해서는 자살요인을 파악하고 건강상태, 사회활동, 자아존중감, 자기통제감 관련하여 상담 및 프로그램을 마련해야 할 것이며 자살예방을 돕는 적극적인 간호중재의 모색이 필요하다 하겠다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.471.2-471.2
• /
• 2014

We demonstrate here that an improvement in precursor film density (green density) leads to a great enhancement in the photovoltaic performance of CuInSe2 (CISe) thin film solar cells fabricated with Cu-In nanoparticle precursor films via chemical solution deposition. A cold-isostatic pressing (CIP) technique was applied to uniformly compress the precursor film over the entire surface (measuring 3~4 cm2) and was found to increase its relative density (particle packing density) by ca. 20%, which resulted in an appreciable improvement in the microstructural features of the sintered CISe film in terms of lower porosity, reduced grain boundaries, and a more uniform surface morphology. The low-bandgap (Eg=1.0 eV) CISe PV devices with the CIP-treated film exhibited greatly enhanced open-circuit voltage (VOC, from 0.265 V to 0.413 V) and fill factor (FF, from 0.34 to 0.55), as compared to the control devices. As a consequence, an almost 3-fold increase in the average power conversion efficiency, 3.0 to 8.2% (with the highest value of 9.02%), was realized without an anti-reflection coating. A diode analysis revealed that the enhanced VOC and FF were essentially attributed to the reduced reverse saturation current density (j0) and diode ideality factor (n). This is associated with the suppressed recombination, likely due to the reduction in recombination sites such as grain/air surfaces (pores), inter-granular interfaces, and defective CISe/CdS junctions in the CIP-treated device. From the temperature dependences of VOC, it was confirmed that the CIP-treated devices suffer less from interface recombination.

• 한국환경복원기술학회지
• /
• 제20권4호
• /
• pp.1-13
• /
• 2017

The purpose of this study is to analyze a term of decade of water quality data of the Mulgum intake station on the Nakdong river(dam) to find the cause of algal blooms and to set an alternative to prevent artificial lake water pollution. Our study shows that water quality changes have regular periodic regularity and there was a certain correlation between specific analytical items. According to the analysis results of each factor, the decline in precipitation was not the main reason for algal blooms. TP concentration had a slight effect on Chl-a concentration but was not a limiting nutrient of a bloom. TN concentration had a strong correlation with Chl-a and strongly negative correlation with temperature, but was not a bloom's limiting nutrient, and was only a dependent variable. As the temperature was negatively correlated with the Chl-a concentration, it is found that the aspect of the ecological influence of the temperature was the most important factor of the phytoplankton concentration change. The N/P ratio lies under a power function with a high degree of reliability by the TP concentration, and the phenomenon appeared to be the same as the results of two other comparative areas. This result confirms that TN is dependent on TP and the biota in the lake that TN is a dependent variable whose concentration is determined by TP it. In conclusion, the increase in lake bloom is the result of a food chain change, and it is necessary to control the ecosystem by the food chain in the lake in order to reduce the lake's bloom. In particular, it is important to keep the benthic ecosystem as wide as possible in the aerobic state.

• 대한전자공학회논문지SD
• /
• 제40권8호
• /
• pp.598-609
• /
• 2003

본 논문에서는 CMOS IF PLL 주파수합성기를 설계하였다. 설계된 주파수합성기는 칩 외부에 LC 공진 회로를 원하는 값에 맞게 바꿈으로써 다양한 중간 주파수에서 동작 가능하다. VCO는 자동진폭조절 기능을 갖도록 설계하여 LC 공진회로의 Q-factor에 무관하게 일정한 진폭의 출력을 발생한다. 설계된 주파수분주기는 8/9 또는 16/17 dual-modulus prescaler를 포함하며, 다양한 응용분야에 적용 가능하도록 외부 직렬데이터에 의해 동작 주파수를 프로그램할 수 있도록 하였다. 설계된 회로는 0.35㎛ n-well CMOS 공정을 사용하여 제작되었으며, 제작된 IC의 성능을 측정한 결과 260㎒의 동작주파수에서 위상잡음은 -114dBc/Hz@100kHz 이고 lock time은 300㎲보다 작다. 설계된 회로는 3V의 전원전압에서 16mW의 전력을 소모하며, 칩 면적은 730㎛×950㎛이다.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.36-45
• /
• 2022

The aim of this study was to verify an E-driving system of a 44 kW-class electric tractor using agricultural workload data. Workload data were acquired during field test (plow tillage, rotary tillage, loader operation, field driving, asphalt driving) using a conventional tractor with a load measurement system. These workload data were converted to data of a 44 kW-class tractor based on the load factor of the engine. These data were used to verify the design of the E-driving system of an electric tractor. High-load operations such as plow tillage, rotary tillage, and loader operation could be performed at stage L and stage M. High-speed operation (asphalt driving) could be effectively performed at stage H using a rated rotational speed of the motor. As a result, the E-driving system of the electric tractor was possible to perform all major agricultural operations according to gear stages of range shift. Based on results of this research, we plan to develop an electric tractor equipped with an E-driving system and conduct research on actual vehicle verification in the future.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.130-133
• /
• 2001

A multifilamentary Bi-2223 HTS tape for superconducting power applications was studied through the fabrication of 250-meter long tapes by the PIT(powder in tube) process. To fabricate continuous long wire, a drawing machine, a two-drum bull block and a rolled tape winding machine were developed. Especially, 250-meter long tapes were heat treated in the shape of pancake coil to reduce the heat affect zone and to achieve the high critical current. Engineering critical current density was improved through both the enhancements of critical current density by control of thermal process and the increase of filling factor by using thin Ag alloy sheath tubes less than 1.5 mm in thickness. We have made successfully 250-meter long 37 filamentary tapes with high filling factor up to 31 % employing the modified drawing and rolling technique. The critical current of 250-meter long tapes with pancake coil type was measured by transport method at self-field up to 250 gauss of center field. The measured values, based on the transport critical current at self-field, $I_{c}$ -B characteristics and magnetic field analysis, are 34 A of I$_{c}$ and 4.0 $kA/\textrm{cm}^2$ of $J_{e}$ at 250 m, 77 K, and 0 T. We also have achieved the 56 A of I$_{c}$ and 7.0 $0 kA/\textrm{cm}^2$ of$ J_{e}$ in short tapes at 77K, self-field, and 1$mutextrm{V}$/cm.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.64-70
• /
• 2023

Garlic is classified as one of the three essential seasoning vegetables in Korea. In 2023, it was reported that the area under garlic cultivation was 24,700 ha, and the production stood at 318,220 tons. Garlic harvesting mechanization currently stands at 43.8%, and garlic is still collected manually after digging out using diggers, so the process is labor intensive. To reduce garlic production costs and enhance competitiveness, it is necessary to develop a high-performance gathering type harvester in place of the digging type harvester. Therefore, in this study, a gathering-type garlic harvester that can dig and collect simultaneously was designed and manufactured, and the harvest performance by factor was analyzed through a harvest performance test. As a result of the performance test, it was analyzed to perform optimally at a driving speed of 0.11m/s and a transfer speed of 85rpm. Work performance was calculated using the results obtained from the factor performance test.

• Journal of Radiation Protection and Research
• /
• 제46권1호
• /
• pp.14-23
• /
• 2021

Background: For radiological protection and control, the International Commission on Radiological Protection (ICRP) provides the nominal risk coefficients related to radiation exposure, which can be extrapolated using the excess relative risk and excess absolute risk obtained from the Life Span Study of atomic bomb survivors in Hiroshima and Nagasaki with the dose and dose-rate effectiveness factor (DDREF). Materials and Methods: Since it is impossible to directly estimate the radiation risk at doses less than approximately 100 mSv only from epidemiological knowledge and data, support from radiation biology is absolutely imperative, and thus, several national and international bodies have advocated the importance of bridging knowledge between biology and epidemiology. Because of the accident at the Tokyo Electric Power Company (TEPCO)'s Fukushima Daiichi Nuclear Power Station in 2011, the exposure of the public to radiation has become a major concern and it was considered that the estimation of radiation risk should be more realistic to cope with the prevailing radiation exposure situation. Results and Discussion: To discuss the issues from wide aspects related to radiological protection, and to realize bridging knowledge between biology and epidemiology, we have established a research group to develop low-dose and low-dose-rate radiation risk estimation methodology, with the permission of the Japan Health Physics Society. Conclusion: The aim of the research group was to clarify the current situation and issues related to the risk estimation of low-dose and low-dose-rate radiation exposure from the viewpoints of different research fields, such as epidemiology, biology, modeling, and dosimetry, to identify a future strategy and roadmap to elucidate a more realistic estimation of risk against low-dose and low-dose-rate radiation exposure.

• 대한의용생체공학회:의공학회지
• /
• 제24권4호
• /
• pp.319-328
• /
• 2003

본 논문은 광역학적 암치료를 위한 광원장치의 개발로서 반도체 다이오드 레이저를 이용한 의료용 레이저 시스템의 개발이 목적이다. 광역학적 암 치료에서 이상적인 광원장치는 초점크기를 조절할 수 있으면서 발산하지 않는 균일한 빛과 특정 파장대의 안정성을 갖는 것이다. 본 연구에서는 이러한 점을 고려하여 635nm 파장대의 다이오드 공진기를 이용하였으며, 개발된 레이저 시스템은 제어장치를 사용하여 정교하고 안정적인 출력을 가지도록 하였으며, 시스템은 사용자의 편리성을 고려하여 소형화하였다. 다이오드 레이저시스템의 펄스 형태의 발진모드에서는 초기의 돌입전류에 의해 공진기를 파손시킬 수 있으므로 본 연구에서는 이러한 현상을 회로적으로 보완하여 msec 단위로 on/off 할 경우에도 공진기에 전혀 손상을 입히지 않도록 설계를 하였다. 임상의가 편리하게 방사시간을 설정하고, 연속출력. 펄스. 버스트 펄스, 슈퍼펄스를 방사할 수 있도록 고안하여. 다양한 암조직의 상태에 따라 치료할 수 있도록 구현하였다. 실험결과 레이저의 출력은 입력전류와 시간에 따라 10mW에서 300mW 까지 선형적으로 증가함을 보였다. 개발된 광역학적 레이저 시스템은 고속제어가 가능하고 정 전류 제어와 효과적인 냉각 제어를 통해 안정적으로 정확하게 출력할 수 있었다.