• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.13-30
• /
• 2011

This study compared Pottery, Hwaecheongware, Buncheongware and Whiteware pieces excavated in Hakbong-ri of Chungnam analytically by observing their refined structures and estimating their firing temperature. As a result, base soil components of the specimens were mostly similar to those of typical Buncheongware, but the content of the fluxing agent was rather high, and it seemed that the Whiteware had been made with fairly different components from those of other sherds. Although the glaze showed less difference than base soil in general, the content of the glaze changed according to the decorating methods of Buncheongware. Based on the SEM-EDS analysis, it was found that the base soil components of the ceramics seemingly rather different were actually different and the analysis on the fine crystals of the base soil, the anorthite in the glaze and crystals in the ironing part, and the components and contents of white earth showed there were some noticeable points in the process of making each of the sherds. In the refiring experiment to estimate the firing temperature, mostly similar results were gained as $1150^{\circ}C$ to $1200^{\circ}C$ for pottery, $1100^{\circ}C$ to $1150^{\circ}C$ for Hwaecheongware, and $1100^{\circ}C$ to $1200^{\circ}C$ for iron-brown Buncheongware however, the results imply good quality Whiteware was burnt at above $1300^{\circ}C$ while bad quality Whiteware was burnt at a temperature far lower than that. Thus, there was clear difference between Whiteware sherds and other kinds of sherds.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.255-271
• /
• 2009

This study was examined interpretation of making techniques and provenance interpretation of raw materials for the potteries from the Nongseori site in Giheung based on archaeometric characteristics. The potteries are classified into three groups according to the archaeological age. The texture of Neolithic age potteries is sandy soil added a lot of temper such as talc and mica, and Bronze age potteries contain sandy materials which occur naturally include quartz, orthoclase, plagioclase and mica. On the other hand, Proto-three Kingdom Age potteries made of silty soil that sift out coarse minerals from the clay. But all pottery and soil samples in the study were very similar patterns with geochemical evolution trend. This result is sufficient evidence that all pottery samples were produced using the same raw materials from the host rocks around of the site area. The Neolithic age potteries had loose texture and fired probably about 700 to $760^{\circ}C$. The Bronze age potteries had experienced firing about 850 to $900^{\circ}C$. And Proto-three Kingdom Age potteries had compact textured and fired from 900 to $1,050^{\circ}C$. The making techniques of potteries are not represented discontinuation characteristics about the periodic time sequences, and are suggested that revealed a transitional change patterns for production techniques.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.229-248
• /
• 2005

The purpose of this study is to identify the best firing condition for Celadon, which is one of the famous traditional pottery to represent Korean culture, by minimizing energy consumption, cutting firing time, shortening the time of processing ceramic making, in order to, save energy as well as to protect the potters' health. Most Korean potter starts their reduction from $950^{\circ}C$ to change kiln atmosphere. However on this study, reduction have started from $950^{\circ}C\;to\;1200^{\circ}C$ by increasing $50^{\circ}C$ at a time. Then the results are analyzed to be compared to previous Celadon, in colors, chroma, and brightness. As a results, it is found, that the best temperature for starting reduction is $1100^{\circ}C$, when chroma and brightness values to meet same with previous celadon. Therefore the best condition could be made by starting the reduction on $1100^{\circ}C$ to fire celadon, which would have shorten 2 hours of firing process and, at the same time, it could have saved the energy by 12%.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.1
• /
• pp.61-68
• /
• 2023

In North Korea, the production of courage tombs continues, and it is known that the activity rate is higher than that of old tombs. However, pot seedling are planted using hoes and shovels used for planting old tombs with exposed roots and low activity rates. This is believed to result in excessive force when stepping on the container grave with a hoe in the planting process, resulting in the collapse of the container grave or the waste of labor due to the creation of unnecessary planting holes. Therefore, when planting courage graves at North Korean afforestation sites, it is necessary to improve the work of making planting holes using general hoes in a way that improves labor productivity in a more efficient manner. As part of inter-Korean technical cooperation to improve the North Korean afforestation method, this study was conducted with the aim of developing efficient container seedlings and using them for North Korean forest restoration projects. It is believed that developing planting equipment exclusively for container graves for forest restoration in North Korea in South Korea and providing equipment and production technology to North Korea can contribute to the development of forest restoration technology in North Korea. If the Yonggeomyo Development Planting Equipment is provided to North Korea, it will be a realistic inter-Korean forest cooperation project to avoid international sanctions by recognizing the excellence of the development products by directly using its own materials through technical cooperation.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.150-173
• /
• 2024

The Gyeongsang region experienced an epoch-making social transformation approximately around the second to first century BCE, including the replacement of Bronze Age types of tombs (such as dolmens, stone cist tombs, and earthen tombs with flat capstones) with clusters of wooden coffin tombs and the emergence of wajil pottery (soft stoneware) and ironware. These shifts in the archaeological material evidence have been discussed in the context of the formation of the states that comprised the three Han confederacies and in relation to wooden coffin tombs built in later periods. This paper explicates the appearance of clustered wooden coffin tombs with accompanying ironware by categorizing them. In particular, it examines the emergence of wooden coffin tombs by creating the Wolseong-dong type, which differs from Tomb No. 5 in Joyang-dong and Tomb No. 1 in Daho-ri with their deep burial pits and large quantities of prestige goods and soft stoneware items. The Wolseong-dong type of tomb commonly features ironware, including flat-bladed iron axes, oblong cast iron axes, iron wire, iron chisels, and iron swords; a small slender, rectangular wooden coffin tomb with a shallow burial pit of less than sixty centimeters; and pottery of a type preceding soft stoneware, such as long-necked jars, triangular attached-rim pottery bowls and pots, and mounted vessels. There are also a few bronzeware items found in them, but no prestige goods. This study scrutinizes tombs in Tamni-ri in Uiseong, Hagu-ri in Gyeongju, and Hakjeongdong in Daegu by comparing them with the Wolseong-dong type, and it confirms that in Sinseodong in Daegu, Wolseong-dong type tombs and later Joyang-dong type tombs have separate spatial distributions within the site. This also indicates that the Wolseong-dong type is a valid categorization among wooden coffin tombs. Although the rise of the Wolseong-dong type tomb is associated with the migration of a group, I reserve judgement on whether its origins should be understood in the context of the iron culture in the southwestern region of South Korea that was sparked by King Jun's advance to the south or if they lie in the western region of North Korea. Either way, the Wolseong-dong type is thought to be the tombs of a group of people with lower hierarchical status than the occupants of the later Joyang-dong type.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.670-676
• /
• 2016

In this study, we analyzed the utensils, covers and mats that were used for making meju, the shape of meju, and the heating method used for making meju from the 225 ways of preparing jang mentioned in the 32 volumes of the ancient cook books from 530 AD to 1950. The heating method of traditional meju bean and starch included 57 kinds of steaming, 59 of boiling, 21 of roasting + boiling, and 2 of cooking. The shape of meju included 41 kinds of egg, 27 of ball, 22 of lump, a kind of doughnut, 8 kinds of hilt, 6 of flat, 4 of chip, and a kind of square. Among the 72 gochoojang meju, the heating method of bean included 9 kinds of boiling, and 6 kinds of steaming; whereas the heating method of starch included 19 kinds of steaming of dough, 11 of rice cooking, and 5 of boiling of dough. The utensils for molding of bean meju were 49 kinds of straw sack, 14 of round straw container, 11 of heating bed, 7 of large straw bowl or Japanese-snailseed, 5 of jar, 4 of ditch, 3 of straw bowls, 2 of pottery steamer of dough, 2 of gourd, and a kind of long round bamboo bowl and sack of straw. The cover and the mat used for molding of meju included 36 kinds of straw, 17 kinds of paper mulberry leaf, 15 of wide straw seat, 14 of mugwort, 11 of pine tree leaf, 10 of soybean leaf, 6 of cocklebur leaf, 6 of sumac leaf, 6 of barley straw, 6 of mulberry leaf, 5 of fallen leaf, 5 of cogon grass, 4 of reed seat, 3 of scrap of cloth, 2 of Indian bean tree leaf, a kind of reed. There were only 5 kinds of hanging.

• 보존과학연구
• /
• s.21
• /
• pp.233-271
• /
• 2000

This study has proved if there are homogeneities in crystal structures, firing temperaures and element compositions of 69 specimens for potteries and soils from Changdo, Kangjin-gun, Jinjuk-Ri in Korea and Yaezhou inChina and obtained the following results.1. XRD analyses showed that soft potteries seemed to contain ($\alpha$)quartz, feldspar, while hard potteries seemed to contain ($\alpha$-)quartz, mullite, tridymite, feldspar. Jinjuk-Ri soils consisted of clays such as Kiolinite, Montmorillonite, Muscovite, Illite and, mica and feldspar etc.2. It was estimated that the firing temperatures which are determined by crystals using XRD, ranged from $550^{\circ}C$ to $870^{\circ}C$ for soft potteries and $870^{\circ}C$ to $975^{\circ}C$ for hard potteries.3. The firing temperatures for 4-pieces of Changdo pottery were measured by using TG-DTA, and it was found that specimen No. 10 was fired at temperatures below $600^{\circ}C$, while specimens No. 14, No. 23 and No. 29 were fired at temperatures above $1000^{\circ}C$.4. It was found that the specimems for potteries and porcelains from Changdo, Kangjin-gun, Jinjuk-Ri in Korea and Yaezhou in China were apparently classified into 4 clusters. This suggests that there are no correlations between the raw materials used in each 4 regions. Among the porcelains from Changdo, there were many typologically similar ones to those from Yaezhou in China in the 9th centry, but the analyses of porcelains only from Changdo, Kangjin in Korea and Yaezhouin China showed that they were classified into 3 clusters. This suggest that there are no correlations between the raw materials used for making porcelains in Changdo, Kangjin-gun, Jinjuk-Ri in Korea and Yaezhou in China.

• Journal of Conservation Science
• /
• v.7 no.1
• /
• pp.23-30
• /
• 1998

The examination of scientific analysis could give many information on the object of ancient glass. It would be allowed to understand the cultural situation and a course of inflow that the data of glass composition was classified by raw materials, technique of making, period and regional groups. Quantitative analysis conditions for SEM-EDS were set for glass and glaze on the pottery and 62 samples of glass beads excavated from Yangdong-ri remains at Kimhae were analyzed and classified. It was found that the glass beads were made of all alkali-glass. In addition, it was postulated that the potash glass was appeared from the 1st century A.D. and soda glass was appeared from the late second or early 3rd century A.D. in this region. The colors of glass were closely related to the concentration of metallic elements such as copper, iron and manganese. It was confirmed that the composition of glass beads could be classified and characterized by raw materials, color, period and regional groups.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2010

The crucibles of Baekje Kingdom from the Ssangbukri Site which were used for glass and metal melting had light brown, grayish blue and grayish brown colored bodies. In thin section, the crucibles contained numerous quartz grains and pottery fragments. The surface was covered with fine grained quartz for thermal resistance. Based on decomposition of mica group minerals and formation of mullite detected by X-ray diffraction analysis, it was inferred that all crucibles have been fired over $1,000^{\circ}C$. It was also found that firing temperature has exceeded $1,100^{\circ}C$ in some crucibles because feldspar was not detected. The maximum temperature was assumed at $1,200^{\circ}C$. The magnetic susceptibility values and geochemical characteristics sorted out the crucibles into two groups that differed from the characteristics of the local soils. This reflected geological setting of the site where the alluvium was formed from two kinds of surrounding rock masses, granite gneiss and biotite granite. However, the local soils had similarities with the crucibles in weathering degree and geochemical behavior of major elements. In consequence, it was considered that the raw clay of the crucibles was supplied from the local area of the site.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.152-161
• /
• 2020

The purpose of this study was to compare the chemical properties of white soil and refined clay sediment, which are produced early in the refining process. The characteristics of the white wares made at the kiln site in Goseong-ri, Chuncheon were also examined. Three groups of materials were examined: white wares excavated from the white wares kiln, raw material from white soil collected from the surface, and a refined clay sediment group. There were also three analysis methods, which were a main components analysis, a trace components analysis, and a mineral analysis. The main components analysis found that the white wares clay was in the RO₂4.04~4.28 and the RO + R₂O 0.30~0.31 mole areas, which were similar to the results for the refined clay sediment. However, the refining process used to produce better quality white wares meant that the large differences in the early white soil raw material appeared in the refined sediment. The mineral phase analysis showed that the crystals detected in the early white soil raw materials and refined clay sediment were almost identical. However, quartz and mullite mineral phases, which can occur above a certain temperature, were detected in the excavated white wares clay. Rare earth elements that were not affected by the pottery making process and the weathering of clay materials were found to have the same origin in all three groups.