• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.411-418
• /
• 2000

With the limited amount of budget and time, it is required to determine the priority of investment when there are a large number of hazardous slopes. In this paper, the Rock Slope Risk Rating System is developed based on the combination of the hazard of failure and the damage potential. By applying the proposed rating system to 253 rock slopes in Korean National Highway, it was possible to determine the priority of investment on road cut slopes.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.64-71
• /
• 1999

Seismicity of the Korean Peninsula shows intraplate seismicity that has irregular pattern in both time and space. Seismic data of the Korean peninsula consists of historical earthquakes and instrumental earthquakes. In this study we devide these data into complete part and incomplete part and considering earthquake size uncertainty estimate seismic hazard parameters - activity rate λ, b value of Gutenberg-Richter relation and maximum possible earthquake IMAX by statistical method in each major tectonic provinces. These estimated values are expected to be important input parameters in probabilistic seismic hazard analysis and evaluation of design earthquake.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.755-767
• /
• 2014

Chlorine is one of the most produced and most used non-flammable chemical substances in the world even though its toxicity and high reactivity cause the ozone layer depletion. However, in modern life, it is impossible to live a good life without using Chlorine and its derivatives since they are being used as an typical ingredient in more than 40 percent of the manufactured goods including medicines, detergents, deodorant, fungicides, herbicides, insecticides, and plastic, etc. Even if Chlorine has been handled and distributed in various business (small and medium-sized businesses, water purification plants, distribution company, etc.), there have been few researches about its possible health hazard and transportation risks. Accordingly, the purpose of this paper is to make a detailed assessment of Chlorine-related risks and to model an index of chemicals transportation risks that is adequate for domestic circumstances. The assessment of possible health hazard and transportation risks was made on 13 kinds of hazardous chemicals, including liquid chlorine. This research may be contributed to standardizing the risk assessment of Chlorine and other hazardous chemicals by using an index of transportation risks.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.15-23
• /
• 2010

Debris flows are a natural hazard which looks like a combination of flood, land and rock slide. Large rainfall in July 2006 produced several large scale debris flows and many small debris flows that resulted in loss of life and considerable property and railway damage, as was widely reported in the national media. The hazard "debris flow" is still insufficiently researched. Furthermore debris flows are very hard to predict. Flexible Ring net barriers are multi-functional mitigation devices commonly applied to rock fall or floating wood protection in floods, snow avalanches and also mud flows or granular debris flows, if properly dimensioned for the process or processes for which they are intended. Overtopping of the barriers by debris flows and sediment transport is possible, supporting the design concept that a series of barriers may be used to stop volumes of debris larger than are possible using only one barrier. The future for these barrier concepts looks promising because these barriers represent the state of art for such applications and are superior to many other available options.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.1-20
• /
• 2018

Despite many measures, still from time to time catastrophic events occur, even after reviewing potential scenarios with HAZID tools. Therefore, it is evident that in order to prevent such events, answering the question: "What can go wrong?" requires more enhanced HAZID tools. Recently, new system based approaches have been proposed, such as STPA (system-theoretic process analysis) and Blended Hazid, but for the time being for several reasons their availability for general use is very limited. However, by making use of available advanced software and technology, traditional HAZID tools can still be improved in degree of completeness of identifying possible hazards and in work time efficiency. The new HAZID methodology proposed here, the Data-based semi-Automatic HAZard IDentification (DAHAZID), seeks to identify possible scenarios with a semi-automated system approach. Based on the two traditional HAZID tools, Hazard Operability (HAZOP) Study and Failure Modes, Effects, and Criticality Analysis (FMECA), the new method will minimize the limitations of each method. This will occur by means of a thorough systematic preparation before the tools are applied. Rather than depending on reading drawings to obtain connectivity information of process system equipment elements, this research is generating and presenting in prepopulated work sheets linked components together with all required information and space to note HAZID results. Next, this method can be integrated with proper guidelines regarding process safer design and hazard analysis. To examine its usefulness, the method will be applied to a case study.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.449-454
• /
• 2004

Nowadays, flood hazard maps have been generated to minimize the loss of human lives due to flooding domestically. To generate the flood hazard maps, LiDAR data have mainly been used to provide topographic data. The LiDAR data requires, however, relatively higher cost and processing time. Therefore, the needs of validating possible use of topographic maps as an alternative source of LiDAR, which have been already existed from the NGIS project over the nation, has been raised. In this background, this study has generated a DEM over City of Kuri as a pilot study using conventional 1:1,000 and 1:5,000 topographic maps emphasizing the linkage of river profile with breakline processing algorithm to build the essential topographic data as accurate as possible. The results showed that the RMSE from topographic maps and LiDAR were 3.49 and 2.282 meter, respectively. Further study needs to be made to decide possible use of topographic maps instead of LiDAR including more easier updating of topographic maps to support flood map generation. In addition, 1:1,000 topographic mapping, which is limited to the urban areas so far, needs to be extended to the river areas.

• Korean Security Journal
• /
• no.40
• /
• pp.7-33
• /
• 2014

Korean Government decided to establish the Ministry of National Emergency Management and has reformed the emergency management system due to Sewol ferry disaster. These efforts has been focused on the hardware rather than the software. All-hazard approach has been employed as the one of main principles in the emergency management in the United States. All-hazards approach concerns arrangements for managing the large range of possible effects of risks and emergencies. Once the priority of risks and emergencies is decided, agencies prepare for them. In addition, interagency collaboration is critical for the preparation of risks and emergencies such as cooperation with local governments instead of FEMA alone. It is necessary to consider employing all-hazard approach for the Ministry of National Emergency Management. Moreover, 'Korean All-hazard approach' should be developed in order to manage upcoming emergencies.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.4
• /
• pp.293-300
• /
• 2012

Objectives: In chemical hazard communication, information receiver's perception is a important factor, but the study on the perception was few. Therefore, this study evaluated the perception of managers and workers group about chemical hazard communication by chemical hazard communication tools that were being used in fields. Methods: 91 managers and 238 workers were surveyed in two companies where use chemicals. All subjects were asked about the comprehensibility and perception for MSDS and GHS Pictograms being used in their workplaces through face-to-face interviews. Results: Most of the respondents knew MSDS, and more than half of the respondents had used MSDS once or more per year. The level of use to find the information on chemicals with MSDS was higher in the managers in comparison with workers. Also, the managers could understand and find the information on MSDS easier(p < 0.05). In the question asking the meaning of GHS Pictograms, the managers responded more correctly, as well(p < 0.05). 86.8% of the managers and 62.6% of the workers were conscious of the possible health hazards of chemicals that they could be exposed at work. However, among the respondents conscious of the health hazards, only less than 70% were well aware of the contents of the health hazards correctly. Conclusions: In chemical hazard communication, it is very important to evaluate whether information receiver have proper and correct knowledge and perception or not and actions based on the evaluations as well as provide correct information.

• Journal of Convergence for Information Technology
• /
• v.8 no.4
• /
• pp.121-126
• /
• 2018

We are developing a hazard map creation support system for historical local towns. Our system aims at collecting the unique information received from residents and raising resident's consciousness to disasters by recording hazardous locations where residents feel danger in case of disasters. In this paper, we examine the hazard information of the area collected by the residents themselves in using the system. While exchanging opinions, the residents review the validity and completeness of the information gathered by walking around the area. We also consider how to integrate and share it throughout the region. We found that it was possible to gather regional hazard information from the viewpoint of residents in addition to high coverage for each district. Also, by sharing information at the review meeting, the residents were able to newly know the hazard information of other districts that they did not know before. This shows the usefulness of residents to share the dangerous information while examining each cause across the different districts.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.520-526
• /
• 2009

This study proposed the optimum design values for the biological clean room system observing the regulations of Hazard Analysis Critical Control Point (HACCP). Even though the standard for industrial clean room system has been well established, the basis for biological food clean room system is the first stage. In order to prevent the contaminations in advance for food storages, processes, and distributions, the criterion of Hazard Analysis Critical Control Point is positively required. This study also suggested the possible ways of how to avoid the hazardous contaminations.