• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.1001-1007
• /
• 2006

In this paper we present robust optimal supporting positions for large glass panels used for TFT-LCD monitors when they are stored in a cassette during manufacturing process. The criterion taken is to minimize their maximum deflection. Since they are supported by some supports and have large deformations, contact analysis with a geometrically nonlinear effect is necessary. In addition, the center of a panel can not be positioned exactly as intended and should be considered as uncertainties. To take into account of these effects, the mean and the standard deviation of system response functions, particularly the deflection of the panels, need be calculated. A function approximation moment method (FAMM) is utilized to estimate them. It is a special type of response surface methodology for structural reliability analysis and can be efficiently used to estimate the two stochastic properties, that is, the system performance and the perturbations caused by uncertainties. For a design purpose, they are to be minimized simultaneously by some optimization algorithm to obtain robust optimal supporting positions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1357-1363
• /
• 1994

A Monte-Carlo simulation model is developed to predict size distribution produced by the coalescence of air bubbles in turbulent shear f1ow. The simulation consists of generating a population of air bubbles into the initial positions at each time step and tracking them by simulating motions and checking collisions. The radial displacement of air bubbles in the simulation model is produced by numerically solving an advective diffusion equation. Longitudinal displacements are generated from the logarithmic flow velovity distribution and the bubble rise velocity. Collision of air bubbles for each time step is detected by a geometric test using their relative positions at the beginning of the time step and relative displacements during the time step. At the end of the time step, the total number of bubbles, their positions, and sizes are updated. The computer program is coded such that minimum storages for sizes and positions of bubbles are required.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.743-750
• /
• 2003

The equivalent source method(ESM) is used for the calculation of the internal pressure field for an enclosure which can have arbitrary boundary conditions and nay include internal objects which scatter the sound field. The advantage of using ESM is that it requires relatively low computing cost and is easy to model the internal diffracting objects. Typical ESM modeling uses two groups of equivalent source positions. One group includes the first order images of the source inside the enclosure. The Positions of the other group are usually on a spherical surface some distance outside the enclosure. The normal velocity on the surfaces of the enclosure walls is evaluated at a larger number of positions than there are equivalent sources. The sum of the squared difference between this velocity and the expected is minimized by adjusting the strength of the equivalent sources. This study is on the optimal far field sources positions when using the equivalent source method. In general, the far field sources are evenly distributed on a surface of a virtual sphere which is centered at the enclosure with a sufficiently large radius. In this study. optimal far field source locations are searched using simulated annealing method for various radii of spheres where far field sources are located. Simulation results showed that optimally located sources with adequate distance away from the enclosure center gave better result than sources with even distribution even with a smaller number of far field sources.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.370-375
• /
• 2004

This paper proposes an algorithm that estimates three dimensional array shape calibration about the bottom-mounted sensor array. under the assumption that the active sources are in the far-field with unknown positions. Under some assumptions. we calculate the sensor positions via an algebraic solutions of a least squares problem that the linear equations are related to the sensor positions and directions or arrival. We give examples of algorithm performance from both computer simulations and sea test. We also illustrate the performance of sensor positions estimation as a function of time delay estimation variance and the distribution of the localizing sources.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.1
• /
• pp.51-58
• /
• 2011

Purpose : This study was designed to identify the effects of carrying bag positions (None, left hand, right hand, left shoulder, right shoulder) on static balance. Methods : Fourteen healthy adult females participated in the this study. The exclusion criteria were orthopedic or neurologic disease, predominant left side. Measurements were performed initial effects. Results were evaluated by OSI, APSI, and MLSI in the biodex stability system. Results : There are among the three assessments (overall stability index(OSI), antero-posterior stability index (APSI), medio-lateral stability index(MLSI) significants difference for the carrying bags positions (None bag, left hand, right hand, left shoulder, right shoulder)(p<.05). The post-hoc test revealed a significant difference between none bag and both left hand and left shoulder in the OSI, APSI, MLSI (p<.05). Also, comparing the carrying positions significant difference between right hand and both left hand and left shoulder in the MLSI (p<.05). Conclusion : The results suggest that none dominant side with carrying bag improve more imbalance than none bag and right hand of dominant with carrying bag improve more balance than non dominant side. When comparing the four carrying bag conditions, right hand was more effective than another conditions in static balance.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.4
• /
• pp.728-733
• /
• 2011

This study was designed to analyze the results of stress index by heart rate variability test. The subjects were workers in the automobile manufacturing industry. The subjects consisted of 23,767 workers who had answered about questionnaires of a job position, age, smoking, drinking, exercise state and sex. The stress index(SI) and stress resistance(SR) were examined by SA3000P. We analyzed the differences of SI and SR according to job positions, ages, the state of smoking, drinking, exercise and sex by T-test or ANOVA with SPSS ver. 17.0. Regarding the differences of SI among job positions, the SI was highest in sales positions. Among ages, the SI was highest in 30s. In smoking, the SI was lower in non-smoking group. In drinking, there was no significant differences in SI. In exercise, the SI was lower in exercise group. In sex, there was no significant difference. The case of SR, SR was lowest in sales positions. Among ages, the SR was lowest in 40s. In smoking, the SR was lower in smoking group. In drinking, there was no significant differences in SR. In exercise, there was no significant difference. In sex, the SR was lowest in male. According to these results, we should establish the methods of controlling stress from the perspective of Korean traditional medicine.

• The korean journal of orthodontics
• /
• v.45 no.6
• /
• pp.275-281
• /
• 2015

Objective: To assess the accuracy of anterior tooth movement using clear aligners in integrated three-dimensional digital models. Methods: Cone-beam computed tomography was performed before and after treatment with clear aligners in 32 patients. Plaster casts were laser-scanned for virtual setup and aligner fabrication. Differences in predicted and achieved root and crown positions of anterior teeth were compared on superimposed maxillofacial digital images and virtual models and analyzed by Student's t-test. Results: The mean discrepancies in maxillary and mandibular crown positions were $0.376{\pm}0.041mm$ and $0.398{\pm}0.037mm$, respectively. Maxillary and mandibular root positions differed by $2.062{\pm}0.128mm$ and $1.941{\pm}0.154mm$, respectively. Conclusions: Crowns but not roots of anterior teeth can be moved to designated positions using clear aligners, because these appliances cause tooth movement by tilting motion.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.581-586
• /
• 2012

The microstructure and mechanical properties of a copper alloy sheet processed by differential speed rolling (DSR) were investigated in detail. A copper alloy with thickness of 3 mm was rolled to a 50% reduction at ambient temperature without lubrication and with a differential speed ratio of 2.0:1. For comparison, conventional rolling (CR), in which the rolling speeds of the upper and lower rolls is 2.0 m/min, was also performed under the same rolling conditions. The shear strain of the sample processed by CR showed positive values at the positions of the upper roll side and negative values at the positions of the lower roll side. On the other hand, the sample processed by the DSR showed zero or positive shear strain values at all positions. However, the microstructure and mechanical properties of the as-rolled copper alloys did not show such significant differences between the CR and the DSR. The samples rolled by the CR and the DSR exhibited a typical deformation structure. In addition, the DSR processed samples showed a typical rolling texture in which {112}<111>, {011}<211> and {123}<634> components were developed at all positions. Therefore, it is concluded that the DSR was very effective for the introduction of a uniform microstructure throughout the thickness of the copper alloy.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.1
• /
• pp.1406-1412
• /
• 2018

This study aimed to measure the grip strength of the dominant and non dominant hands of right-handed normal adults in the supination, pronation, and neutral positions of the forearms. The subjects of this study were instructed to make the standard posture suggested by the American Society of Hand Therapists (ASHT) in order to minimize the impact of changes in the posture of the body as follows. The grips strength was statistically different between groups (p<.05). In the follow up test using Scheffe test, the grips in the neutral position and supinator position did not show any difference, while the grip in the pronation was smaller than those of the above two other positions. The grips of the mainly used forearm and non-mainly used forearm of the study target did not show any statistically significant difference in the neutral, supinator and pronation positions of the forearm. This study is expected to provide basic information for studying the impact of the positions of the forearms on grip strength, assessing the prehensility of patients in clinical settings, and setting therapeutic goals.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.685-692
• /
• 2016

Hydrogen will be a future eco-friendly energy source that can replace current fossil fuels However when hydrogen gas leaks and people inhale a lot of hydrogen gases, they can have fatal effects fell into comas. Therefore, we need to develop a safety technology and related guidelines for reducing risks of hydrogen leakage. In this regard, we carried out demonstration tests assuming a situation of hydrogen leakage. Before the experiments, we analyze the standards for governor facilities to check vent positions and sensor positions. Then, we select four types of ventilation structures and proceeds with the experiments of hydrogen leakage at 1 LPM and 1.5 LPM. Based on the experimental results, we propose the direction on optimization of vent positions and sensor positions in the hydrogen leakage situation.