• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.247-253
• /
• 2019

In this paper, we present a new method for real-time tracking of human walking around a laser sensor system. The method converts range data with $r-{\theta}$ coordinates to a 2D image with x-y coordinates. Then human tracking is performed using human's features, i.e. appearances of human walking pattern, and the input range data. The laser sensor based human tracking method has the advantage of simplicity over conventional methods which extract human face in the vision data. In our method, the problem of estimating 2D positions and orientations of two walking human's ankle level is formulated based on a moving trajectory algorithm. In addition, the proposed tracking system employs a HMM to robustly track human in case of occlusions. Experimental results using a real system demonstrate usefulness of the proposed method.

• Smart Media Journal
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2019

As numerous devices are connected through a wireless network, there exist many studies conducted to efficiently connect the devices. While earlier studies often use clustering for efficient device management, there is a load-intensive cluster node which may lead the entire network to be unstable. In order to solve this problem, we propose a scheduling model for centralized unequal chain clustering for efficient management of sensor nodes. For the cluster configuration, this study is based on the cluster head range and the distance to the base station(BS). The main vector projection technique is used to construct clustering with concentricity where the positions of the base stations are not the same. We utilize a multiple radio access interface, multiple-input multiple-output (MIMO), for data transmission. Experiments show that cluster head energy consumption is reduced and network lifetime is improved.

• Structural Engineering and Mechanics
• /
• v.69 no.2
• /
• pp.221-230
• /
• 2019

In this paper, shear behavior of non-persistent joint surrounded in concrete and gypsum layers has been investigated using experimental test and numerical simulation. Two types of mixture were prepared for this study. The first type consists of water and gypsum that were mixed with a ratio of water/gypsum of 0.6. The second type of mixture, water, sand and cement were mixed with a ratio of 27%, 33% and 40% by weight. Shear behavior of a non-persistent joint embedded in these specimens is studied. Physical models consisting of two edge concrete layers with dimensions of 160 mm by 130 mm by 60 mm and one internal gypsum layer with the dimension of 16 mm by 13 mm by 6 mm were made. Two horizontal edge joints were embedded in concrete beams and one angled joint was created in gypsum layer. Several analyses with joints with angles of $0^{\circ}$, $30^{\circ}$, and $60^{\circ}$ degree were conducted. The central fault places in 3 different positions. Along the edge joints, 1.5 cm vertically far from the edge joint face and 3 cm vertically far from the edge joint face. All samples were tested in compression using a universal loading machine and the shear load was induced because of the specimen geometry. Concurrent with the experiments, the extended finite element method (XFEM) was employed to analyze the fracture processes occurring in a non-persistent joint embedded in concrete and gypsum layers using Abaqus, a finite element software platform. The failure pattern of non-persistent cracks (faults) was found to be affected mostly by the central crack and its configuration and the shear strength was found to be related to the failure pattern. Comparison between experimental and corresponding numerical results showed a great agreement. XFEM was found as a capable tool for investigating the fracturing mechanism of rock specimens with non-persistent joint.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.59-66
• /
• 2019

The purpose of this study was to develop slacks pattern of elderly women aged over 60s by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, By using 3D Virtual Garment Simulation, new slacks pattern considered elderly women was development. The basic numerical formula were as follows, front waist girth W/4+2+1.5, back waist girth W/4+1.5+0.5, front hip girth H/4+0.75, back hip girth H/4+1.5, front crotch extension H/16-0.5, back crotch extension H/8-1.3, front dart amount 2 and back dart amount 1.5. Second, according to the results of the new slacks pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new slacks pattern is appropriate for the elderly women. Also, new slacks pattern was evaluated to allow proper space length of waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.42-48
• /
• 2019

In the case of a patient with a small number of unilateral remaining teeth in the mandible, a restoration with conventional removable partial denture cannot provide sufficient retention and resistance. A harmful stress from the poor stability of denture on remaining teeth occurs due to alveolar bone resorption in edentulous area. Although implant fixed prosthesis can provide multiple benefits over conventional removable partial denture, there are limitations come from anatomic structures and costs. In this case, an implant-assisted removable partial denture (IARPD) with a couple of implants placed in strategic positions can be a treatment modality. The objective of this article is to present a case report of two patients showed satisfactory clinical outcomes during three-year follow-up period describing the fabrication and advantages of removable partial denture assisted by teeth and implants (IARPD) for a patient with a small number of unilateral remaining teeth in mandible using Locator as an implant attachment.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.77-83
• /
• 2019

In this paper, we propose an object tracking algorithm based on color histogram and convolutional neural network model. In order to increase the tracking accuracy, we synthesize generic object tracking using regression network algorithm which is one of the convolutional neural network model-based tracking algorithms and a mean-shift tracking algorithm which is a color histogram-based algorithm. Both algorithms are classified through support vector machine and designed to select an algorithm with higher tracking accuracy. The mean-shift tracking algorithm tends to move the bounding box to a large range when the object tracking fails, thus we improve the accuracy by limiting the movement distance of the bounding box. Also, we improve the performance by initializing the tracking start positions of the two algorithms based on the average brightness and the histogram similarity. As a result, the overall accuracy of the proposed algorithm is 1.6% better than the existing generic object tracking using regression network algorithm.

• Journal of Practical Engineering Education
• /
• v.11 no.1
• /
• pp.105-115
• /
• 2019

This study focused on the importance of job position as a role model for female career adaptation. To do this, we used the KWMP data to conduct a Multinomial logit analysis to examine the influence factors of the tenure women managers. As a result, first, section chief position showed a low level of life satisfaction and showed difficulty of beginner's manager. Second, it is predicted that the position of the Deputy Head of Department will establish the identity of work as an intermediate manager. Third, head of department Director showed a high age, target status, possibility of achieving the target, and duration of the next job. Fourth, executive level has the least average experience of discrimination on monthly average wage. It was suggested that it is important to develop individual career by recognizing that the organizational atmosphere and personnel management are lower than those of the other positions. It was found that age, organizational atmosphere and personnel management, goal status, possibility of achieving goals, next job tenure period, monthly average wage, welfare, and life satisfaction factors were the most influential factors in women career adjustment. Finally, implications and limitations were discussed based on the results of this study.

• PNF and Movement
• /
• v.17 no.1
• /
• pp.119-127
• /
• 2019

Purpose: The purpose of this study is to show the effect of elastic band on balance and functional ability in chronic stroke patients living in community. Methods: The subjects who participated in the study were 9 patients with chronic stroke. One of them gave up during the study, finally 8 patients performed. The intervention was conducted once a week for 10 weeks. In this study functional reach test (FRT), timed up and go test (TUG), Tinetti performance oriented mobility assessment (Tinetti-POMA) were measured for balance. The coordination training of arms and legs using the elastic band was performed in three positions as supine, side lying, sitting. One arm performed flexion-adduction- external rotation with elbow flexion pattern and the opposite side(diagonal) leg was performed flexion-adduction-external rotation with knee flexion pattern, the other arm's pattern was extension-abduction-internal rotation with elbow extension and the opposite side (diagonal) leg was in extension-abduction-internal rotation with knee extension pattern. The training was performed in each position for 15 minutes in per position. The participants had a five minute break after each training. Results: The results are as follows. FRT and Tinetti-POMA showed significant increase statistically in each position. The TUG showed significant decrease statistically in each position. Conclusion: Even though the coordination training with elastic band had performed once a week, it showed positive effects on balance in chronic stroke patients. Therefore, if we can suggest the appropriate frequencies of coordination training of arms and legs using the elastic band, it can be a method to improve daily life and life quality to patients with chronic stroke.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.658-668
• /
• 2019

The political influences of general programming channels have grown with the help of the current affairs talk programs for years but also these channels have been criticized as politically biased media. This study investigates the characteristics of the panels who had appeared for 6 months since July of 2017 and examines the relationship between the panels' talk and the position of political parties. The results show that jobs of the casting panels were introduced as neutral ones which are not related to politics. However, after reclassifying them in terms of their political careers, most panels were more likely to be involved in political parties. In addition, they tend to support the positions of the ruling or opposition parties. The more the association with the political party, the stronger the panel's comments. The partisanship of the panels should be clearly presented in the broadcasting programs. It is necessary to distinguish genres of current affair programs by consistent standards to ensure consistency of deliberation. Lastly self-regulation of program producers should be more strengthened.