• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.745-758
• /
• 2005

This paper presents a statistical analysis on the position-specific distributions of amino acid residues in transmembrane proteins. A hidden Markov model segments membrane proteins to produce segmented regions of homogeneous statistical property from variable-length amino acids sequences. These segmented residues are analyzed by using chi-square statistic and relative-entropy in order to find position-specific amino acids. This analysis showed that isoleucine and valine concentrated on the center of membrane-spanning regions, tryptophan, tyrosine and positive residues were found frequently near both ends of membrane.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.327-337
• /
• 2000

In this paper, the design sensitivity formula for the control of the transient temperature distribution is developed using the direct differentiation method, and used for the optimal design of induction heating coil position. The temperature distribution is calculated using the heat source of the induced eddy current and heat diffusion equation. The physical property variations of the workpiece depending on the temperature are considered. The eddy current distribution and the temperature distribution are calculated with the 2D finite element procedure. The adjoint variable technique is employed in expressing the design sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region of the sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region of the workpiece. The numerical example shows that the proposed design sensitivity analysis for the control of the transient temperature distribution is very useful and practical in the optimal design of induction heating coils.

• 한국수자원학회논문집
• /
• 제44권2호
• /
• pp.85-96
• /
• 2011

연최대수문량의 도시적 분석에 주로 이용되어 온 확률도시위치는 표본자료와 적정 확률분포형의 적합도를 표시하여 초과확률을 산정할 수 있도록 하며, 일부 적합도 검정에도 사용되기도 한다. 확률도시위치를 결정하는 도시위치공식은 오래 전부터 꾸준히 연구되어 왔는데, 특히 빈도해석에 널리 사용되는 GEV 분포에 대한 연구는 다른 분포형보다 더욱 활발히 이루어져 왔다. 본 연구에서는 GEV 분포에 적합한 도시위치공식을 추정하고자 GEV 분포의 순서통계량의 평균 개념을 이용하여 이론적 축소변량을 유도하였다. 또한 다양한 표본크기와 형상 매개변수와 연관이 있는 왜곡도 계수를 고려한 다양한 형태의 도시위치공식을 적용하고, 유전자 알고리즘을 적용하여 도시위치공식의 매개변수를 추정하였다. 유도된 도시위치공식의 정확성을 알아보기 위해 이론적 축소변량과 금회 유도된 도시위치공식을 포함한 다양한 도시위치공식에 의해 계산되는 축소변량 사이의 오차를 비교하였다. 그 결과, 본 연구에서 제안한 도시위치공식은 GEV 분포의 형상 매개변수가 -0.25~0.10의 범위를 가질 때 이론적 축소변량과 가장 작은 오차를 보이는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.22-29
• /
• 2005

A material cloud method, which is a new topology optimization method, is presented. In MCM, an optimal structure can be found out by manipulating sizes and positions of material clouds, which are lumps of material with specified properties. A numerical analysis for a specific distribution of material clouds is carried out using fixed background finite element mesh. Optimal material distribution can be element-wisely extracted from material clouds' distribution. In MCM, an expansion-reduction procedure of design domain for finding out better optimal solution can be naturally realized. Also the convergence of material distribution is faster and well-defined material distribution with fewer intermediate densities can be obtained. In addition, the control of minimum-member sizes in the material distribution can be realized to some extent. In this paper, basic concept of MCM is introduced, and formulation and optimization results of MCM are compared with those of the traditional density distribution method(DDM).

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.404-412
• /
• 2008

As a suitable volute configuration in the range of low specific speed, circular casing is suggested in this study. The internal flows in a centrifugal pump with the circular and spiral casings are measured by PIV and analyzed by CFD. The results show that the head and efficiency of the pump by a circular casing of very small radius are almost same as those by the spiral casing. Even at the best efficiency point, the internal flow of the pump by circular casing is asymmetric, and vortex and strong secondary flow occurs in the impeller passage. The radial velocity becomes higher remarkably only near the region of the discharge throat. The flow in the impeller outlet is strongly controlled by the circular casing because the velocity distribution almost does not affected by the position of the impeller blades.

• 한국공작기계학회논문집
• /
• 제14권2호
• /
• pp.14-20
• /
• 2005

This paper describes a dwell time calculation algorithm for polishing tool path generation in the small toot polishing process of the axis-symmetrical lens. Generally dwell time control in the polishing machines means that small polishing tool stays for a dwell time at the specific surface position to get the expected polishing depth. Polishing depth distribution on an aspherical lens surface consists of the superposition of the local polishing depth at the each dwell position. Therefore, tool path generation needs each dwell time together with tool positioning data during the polishing tool movements on the aspherical lens surface. The linear algebraic equation of removal depth removal matrix and dwell time is formulated. Parametric effects such as the dwell d interval are simulated to validate the dwell time calculation algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.61-63
• /
• 1998

Disk type single phase SRM (DSPSRM) has a specific property of axial flux machine and radial flux machine simultaneously. So, this DSPSRM has a complicated magnetic circuit and it is difficult to analyze characteristics. Therefore, in this paper, the design specification of DSPSRM was calculated based on conventional design theory of electric machine and analyzed by 3D FEM. As the result of analysis, the approximated torque characteristics was obtained by finding the magnetic flux and energy distribution with the rotor position.

• International Journal of Advanced Culture Technology
• /
• 제12권1호
• /
• pp.134-143
• /
• 2024

We investigated and analyzed the technological landscape of the global pet food industry, focusing on related industries in Korea and abroad. This industry accounts for the largest share of the rapidly growing global pet market. We aimed to identify and develop technologies that can strengthen Korea's position in this market. Our study employed various quantitative methods, including time series analysis, country and applicant analysis, and International Patent Classification (IPC) technology analysis. These analyses allowed us to objectively assess the current technological status, patent application distribution, and technological trends in the pet food industry. Our findings revealed that the United States currently holds the leading position in terms of patent applications within the pet food industry. This suggests that to establish a differentiated competitive edge in this field, it's crucial to develop technologies with high usability and target specific segments within related industries. Additionally, focusing on interdisciplinary research that combines Korea's existing advanced technologies with other relevant fields is essential.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.163-166
• /
• 2016

It is important to operate the driving circuit under the optimal condition through precisely sensing the power consumption causing the temperature made mainly by the MOSFET (metal-oxide semiconductor field-effect transistor) when a BLDC (Brushless Direct Current) motor operates. In this letter, a Super-junction (SJ) power TMOSFET (trench metal-oxide semiconductor field-effect transistor) with an ultra-low specific on-resistance of $0.96m{\Omega}{\cdot}cm^2$ under the same break down voltage of 100 V is designed by using of the SILVACO TCAD 2D device simulator, Atlas, while the specific on-resistance of the traditional power MOSFET has tens of $m{\Omega}{\cdot}cm^2$, which makes the higher power consumption. The SPICE simulation for measuring the power distribution of 25 cells for a chip is carried out, in which a unit cell is a SJ Power TMOSFET with resistor arrays. In addition, the power consumption for each unit cell of SJ Power TMOSFET, considering the number, pattern and position of bonding, is computed and the power distribution for an ANSYS model is obtained, and the SJ Power TMOSFET is designed to make the power of the chip distributed uniformly to guarantee it's reliability.

• 한국광학회지
• /
• 제33권6호
• /
• pp.252-259
• /
• 2022

투과 매트릭스 방법을 이용하여 다중모드 광섬유 출력단에서 빛의 세기 분포를 제어하는 연구를 수행하였다. 공간 빛 변조기를 이용하여 원형으로 배치된 Hadamard 고유모드 위상분포를 실험적으로 구현하고, 네 가지 위상 값 변조 방법을 통하여 다중모드 광섬유의 투과 매트릭스를 실험적으로 도출하였다. 도출한 투과 매트릭스를 기반으로 광섬유에 입사하는 빛에 공간적인 위상 분포를 사전에 적용함으로써 광섬유 출력단의 원하는 위치에 빛을 집속하고자 하였다. 다중모드 광섬유 출력단 코어의 특정 위치에서 주변 배경 신호 대비 최대 359.6배 큰 세기로 빛을 집속할 수 있었으며 다중모드 광섬유 코어 영역 전반에 걸쳐 평균적으로 104.6배 향상된 값으로 빛을 집속할 수 있었다.