• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.60-66
• /
• 1994

The scattering problem by E-polarized plane wave with oblique incidence on a tapered resistive strip grating with infinite resistivity at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density is expanded in a series of Ultraspherical polynomials of the zeroth order. The expansion coefficients are calculated numerically in the spectral domain, the numerical results of the geometricoptical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing. It is found out that these sharp variation points are due to the transition of higher modes between the propagation mode and the evanescent mode.

• Journal of computational fluids engineering
• /
• v.3 no.2
• /
• pp.1-8
• /
• 1998

We make use of cubic B-spline interpolation function in two cases: heat conduction and fluid flow problems. Cubic B-spline test function is employed because it is superior to approximation of linear and non-linear problems. We investigated the accuracy of the numerical formulation and focused on the position of the breakpoints within the computational domain. When the domain is divided by partitions of equal space, the results show poor accuracy. For the case of a heat conduction problem this partition can not reflect the temperature gradient which is rapidly changed near the wall. To correct the problem, we have more grid points near the wall or the region which has a rapid change of variables. When we applied the unequally spaced breakpoints, the results show high accuracy. Based on the comparison of the linear problem, we extended to the highly non-linear fluid flow problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.522-522
• /
• 2000

In this paper, two pre-filtering techniques are presented for accurately estimating the impact location of a loose part. The reason why a pre-filterng technique Is necessary in a Loose Part Monitoring System is that the effects of background noise on the signal to noise ratio (SNR) can be reduced considerably resulting in improved estimation accuracy. The first method is to take d moving average operation in the time domain. The second one is to adopt band-pass filters designed in the frequency domain such as a Butterworth filter, Chebyshev filter I & II and an Elliptic Filter. To show the effectiveness, the impact test data (signals) from the YGN3 power plant are first preprocessed and then used to estimate the loose pan impact position. Resultantly. we observed that SNR is much improved and the average estimation error is below 7.5%.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.196-202
• /
• 2000

In the precision point synthesis of mechanisms, it is usually required to solve a system of polynomial equations. With the aid of efficient algorithms such as elimination, it is possible to obtain all the solutions of the equations in the complex domain. But among these solutions only real values can be used fur real mechanisms, while imaginary ones are liable to be discarded. In this article, a method is presented, which leads the imaginary solutions to real domain permitting slight alteration of prescribed positions and eventually increases the number of feasible mechanisms satisfying the desired motion approximately. Two synthesis problems of planar 4-bar path generation and spatial 7-bar motion generation are given to verify the proposed method.

• Journal of the Korean Magnetics Society
• /
• v.20 no.2
• /
• pp.68-74
• /
• 2010

Nuclear Magnetic Resonance (NMR) is a very useful tool for magnet study because it provides information on local spin environment. The valence of magnetic ions, spin canting angle, orbital state can be measured by NMR and the information on the position of the ions and the change of domains and domain walls can be obtained. The principle of operation is discussed with corresponding application examples.

• YAKHAK HOEJI
• /
• v.47 no.4
• /
• pp.252-259
• /
• 2003

Self-medication is a representative phenomenon in the domain of popular care, originated from perspective of medical pluralism and the pharmacy profession is said to be in the most appropriate position of health care professions to activate self-medication. As any healthcare reform impacts in a country, 2000 institutional separation between medicine and pharmacy implemented in Korea brought a lot of changes in behavior of drug use not only to physicians and pharmacists but also to consumers (patients). In this paper, the reality of self-medication since the institutional separation between medicine and pharmacy was analyzed, based on the empirical data which were collected by the Korea Institute for Health and Social Affairs in 2002. The major finding is that the domain of popular care including self-medication was significantly shrunk, while that of professional care was proportionally expanded. As a result, the following four points were strongly recommended for the purpose of promoting self-medication: i) upgrading the pharmacy education system from 4 year to 6 year level, ii) improvement of continuing education and introduction of GPP (Good Pharmacy Practice), iii) activating 'pharmacal encounter' (i.e., pharmacist-consumer relationship) and iv) promotion of socio-economic research activities and proactive participation in the international self-medication movement of pharmacists in Korea.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.4
• /
• pp.85-95
• /
• 1998

In this paper, a new watermarking method for a copy protectionof images is proposed. The proposed method adaptively embeds a watermark in the frequency domain of images using human visual system model. For this purpose, the Just Noticeable Differences(JNDs) of each frequency coeffeicient value of a luminance plane is first found using Watson and Solomon's visual system model. An invisible maximum watermark value with is different in every position according to the characteristics of images is determined usig JND and Minkowski metric. A low frequency domain is divided into two sets based on a PN-sequence to protect thewatermark from the attack. The watermarks are added to one set of coefficients and detecting a watermark, the difference between the mean values of absolute coefficient values of both sets is calculated. The embedded watermark is tested using statistical hypothesis based on test static dertermined by the ean difference. To demonstrate the perfromance of the proposed method, the new watermarking method is applied to a high frequency image and low frequency images. Experimenatal results show the watermark is invisible and robust to JPEGlossy compression and noise.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.2
• /
• pp.225-234
• /
• 2018

A Multibeam Echo Sounder (MBES) is commonly used for rapid seafloor mapping. We herein present a time-domain integrated system simulation technique for MBES development. The Modeling and Simulation (M&S) modules consist of four parts: sensor array signal transmission, propagation and backscattering modeling in the ocean environment, beamforming of the received signals, and image processing. Also, the simulation employs a ray-theory-based algorithm to correct the reconstructed bathymetry, which has errors due to the refraction caused by the vertical sound velocity profile. The developed M&S technique enables design parameter verification and system parameter optimization for MBES. The framework of this technique can also be potentially used to characterize the seabed properties. Finally, typical seafloor images are presented and discussed.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.413-421
• /
• 2018

We propose a novel methodology based on the multiplication function to improve the signal-to-noise ratio (SNR) for vibration detection in a phi optical time-domain reflectometer system (phi-OTDR). The extreme-mean complementary empirical mode decomposition (ECEMD) is designed to break down the original signal into a set of inherent mode functions (IMFs). The multiplication function in terms of selected IMFs is used to determine a vibration's position. By this method, the SNR of a phi-OTDR system is enhanced by several orders of magnitude. Simulations and experiments applying the method to real data prove the validity of the proposed approach.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.124-129
• /
• 1997

The purpose of this study is to predict the stability and frequency response of multipurpose vehicle. The vehicle model has seven degrees of freedom. The motion equations are derived by using Lagrangian equation and linearized. The positions of eigenvalues of model which are dominated by lateral velocity, yaw rate, roll rate of sprung mass are used to predict the stability of motion. The resonse of sprung mass to steering wheel is simulated in time domain. It is predicted that the roll response of sprung mass would rather be improved by modifying the position of eigenvalues. The responses of sprung mass to steering wheel are also simulated in frequency domain. The magnitude and phase plots of gains are evaluated in driver's steering input frequency range.