• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2509-2512
• /
• 2005

In this paper, a position control scheme of the ink droplet is presented for the high image quality and print speed inkjet printer. The proposed scheme estimates the impact position and compensates it by control of the fire strobe time based on the dynamic equations describing the moving trajectory of the ink droplet. Compared to the conventional fire strobe control which is based on the simple synchronization the fire strobe with the position signal of the inkjet nozzle, the proposed control scheme provides more accurate impact position control during the carrier is moving with accelerated or decelerated speed as well as constant speed. The availability of printing during the acceleration and deceleration states of the carrier moving enables the print speed up and the frame size down which means the cost down.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.410-410
• /
• 2000

Impedance control is recognised as one of the most proper control scheme to carry out the assembly tasks, since it can control the dynamic relationship between the manipulator and environment directly. However, it is well known that the contact force cannot be controlled directly using the impedance control. Also impedance parameters should be properly defined depending on the task to be performed. We propose a new position based impedance control, which has self-adjusted impedance parameters and can control the contact force explicitly, Impedance parameters, as time-varying parameters, are adjusted automatically based on the measured contact force and the position error during the task. A proposed algorithm was implemented on the peg-in-hole task with the industrial manipulator. We shows the effectiveness of proposed control method experimentally.

• 제어로봇시스템학회논문지
• /
• 제9권7호
• /
• pp.515-526
• /
• 2003

Tutorial contents of kinematics and dynamics of a wheeled drive mobile robot are presented. Based on the dynamic model, simulation studies of position tracking of a mobile robot are performed. The control structure of several position control algorithms using visual feedback are proposed and their performances are compared. In order to compensate for uncertainties from unknown dynamics and ignored dynamic effects such as slip conditions, neural network based position control schemes are proposed. Experiments are conducted and the results show the performance of the vision based neural network control scheme fumed out to be the best among several proposed schemes.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.151-158
• /
• 2006

The purpose of this study was to find out the kinematical characteristics of arm's basic position in ballet. In order to achieve the purpose of the study, 3D cinematographic analysis was conducted with a ballerina who might performed the perfect arm's basic position. According to the results of this study, it was appeared that the shoulder kept about 78%-82%, the elbow kept about 62%-96%, the wrist kept 52%-109%, and finger kept 48%-110% with the height. Also, movement was formed with $21^{\circ}-77^{\circ}$ of the upper arm angle, $106^{\circ}-164^{\circ}$ of the elbow, $125^{\circ}-140^{\circ}$ of the wrist, and $83^{\circ}-160^{\circ}$ of the shoulder. The left-right ratio of the total arm angle was 98% in the first, second, and third position, and 100% in the forth position. The angle of arm gradient was remained $-68^{\circ}$ in the first position, $-27^{\circ}$ in the second position, $73^{\circ}$ in the third position, and $-11^{\circ}$ in the forth position. Based on the results mentioned above, balance and symmetry of both arms was an important factor in those four positions. Although it is impossible to maintain the position like robot, it may be a good performance if a certain level of extent was remained With respect to this point of view, it may be a good position if the difference between right and left arm in each joint can be remained within 2%. Angle also was an important factor that if the difference in total angle can be remained within 2% it may be an excellent position, there was difference of right and left based on the joint though. Therefore, practice and instruction to make a perfect symmetry as much as possible were needed Also, it would be a good movement if position and angle of joint within 2% difference of right and left arm can be remained In turn, because ballet is movement with expression of the body, beauty of the body and balance of the movement have to be harmonized for beautiful performance. Therefore, it would be a meaningful future study considering the body condition and movement of ballerina to define the beauty.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.117-124
• /
• 2020

In this paper, the symmetric position drift of the integration approach in pedestrian dead reckoning (PDR) system with dual foot-mounted IMU is analyzed. The PDR system that uses the inertial sensor attached to the shoe is called the IA-based PDR system. Since this system is designed based on the inertial navigation system (INS), it has the same characteristics as the error of the INS, then zero-velocity update (ZUPT) is used to correct this error. However, an error that cannot be compensated perfectly by ZUPT exists, and the trend of the position error is the symmetric direction along the side of the shoe(left, right foot) with the IMU attached. The symmetric position error along the side of the shoe gradually increases with walking. In this paper, we analyze the causes of symmetric position drift and show the results. It suggests the possibility of factors other than the error factors that are generally considered in the PDR system based on the integration approach.

• 센서학회지
• /
• 제29권4호
• /
• pp.237-242
• /
• 2020

This paper deals with relative position estimation using a Kalman filter (KF) based on inertial sensors that have been widely used in various biomechanics-related outdoor applications. In previous studies, the relative position is determined using relative orientation and predetermined segment-to-joint (S2J) vectors, which are assumed to be constant. However, because body segments are influenced by soft tissue artifacts (STAs), including the deformation and sliding of the skin over the underlying bone structures, they are not constant, resulting in significant errors during relative position estimation. In this study, relative position estimation was performed using a KF, where the S2J vectors were adopted as time-varying states. The joint constraint and the variations of the S2J vectors were used to develop a measurement model of the proposed KF. Accordingly, the covariance matrix corresponding to the variations of the S2J vectors continuously changed within the ranges of the STA-causing flexion angles. The experimental results of the knee flexion tests showed that the proposed KF decreased the estimation errors in the longitudinal and lateral directions by 8.86 and 17.89 mm, respectively, compared with a conventional approach based on the application of constant S2J vectors.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2498-2504
• /
• 2009

The fundamental research for the mobile robot navigation using the numerical optimization method is presented. We propose an image-based visual servo navigation algorithm for a wheeled mobile robot utilizing a ceiling mounted camera. For the image-based visual servoing, we define the composite image Jacobian which represents the relationship between the speed of wheels of a mobile robot and the robot's overall speed in the image plane. The rotational speed of wheels of a mobile robot can be directly related to the overall speed of a mobile robot in the image plane using the composite image Jacobian. We define the mobile robot navigation problem as an unconstrained optimization problem to minimize the cost function with the image error between the goal position and the position of a mobile robot. In order to avoid the obstacle, the modified cost function is proposed which is composed of the image error between the position of a mobile robot and the goal position and the distance between the position of a mobile robot and the position of the obstacle. The performance was evaluated using the simulation.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.26-34
• /
• 1999

This study shows an alternative method for the determination of object's position, based on a computer vision method. This approach develops the vision system model to define the reciprocal relationship between the 3-D real space and 2-D image plane. The developed model involves the bilinear six-view parameters, which is estimated using the relationship between the camera space location and real coordinates of known position. Based on estimated parameters in independent cameras, the position of unknown object is accomplished using a sequential estimation scheme that permits data of unknown points in each of the 2-D image plane of cameras. This vision control methods the robust and reliable, which overcomes the difficulties of the conventional research such as precise calibration of the vision sensor, exact kinematic modeling of the robot, and correct knowledge of the relative positions and orientation of the robot and CCD camera. Finally, the developed vision control method is tested experimentally by performing determination of object position in the space using computer vision system. These results show the presented method is precise and compatible.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.957-966
• /
• 2014

Some of DC actuators used in home automation, office automation, medical equipment and automotive systems require a position sensor. In low power applications, the introduction of such a transducer remarkably increases the whole system cost, which justifies the development of sensorless position estimation techniques. The well-known AC motor drive sensorless techniques exploiting the fundamental component of the back electromotive force cannot be used on DC motor drives. In addition, the sophisticated approaches based on current or voltage signal injection cannot be used. Therefore, an effective and inexpensive sensorless position estimation technique suitable for DC motors is presented in this paper. This technique exploits the periodic pulses of the armature current caused by commutation. It is based on a simple pulse counting algorithm, suitable for coping with the rather large variability of the pulse frequency and it leads to the realization of a sensorless position control system for low cost, medium performance systems, like those in the field of automotive applications.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권5호
• /
• pp.329-334
• /
• 2013

위치기반서비스는 이라는 것은 GPS(Global Positioning System)를 통해 자신의 위치정보를 이용한다. 이 애플리케이션은 위치기반특성을 이용하여 스마트폰을 등록된 장소에서는 초록 부분에서도 진동모드로 변환시킨다. 스마트폰 사용자가 진동모드가 필요한 장소를 저장하게 되면, 저장된 장소의 위치와 현재의 스마트폰의 GPS 위치를 비교해서 일치되면 자동으로 매너모드로 전환된다. 그리고 지정된 위치에서 일정영역을 벗어나게 되면 진동이 풀리게 되도록 하였다. 따라서 본 논문은 지능형 스마트폰을 지향하기 위해 제안하였다.