• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1278-1288
• /
• 2019

A DC-DC Non-Isolated Three-Port Cuk-Cuk (NI-TPCC) converter for interfacing renewable energy sources (RESs) such as Fuel Cell (FC) and Photovoltaic (PV) energy with a DC load is presented in this paper. It features single-stage power conversion from both of the input ports to the load port. The proposed NI-TPCC converter is designed based on the classical Cuk converter. The operational modes and power flow are analyzed in the continuous conduction mode (CCM), and the relationships among the port voltages are derived. Continuous currents in all three ports with less ripple enhance the performance of a fuel cell and its operating life. Furthermore, the output inductor is shared with both of the input ports, which reduces the number of active and passive components. The effectiveness of the designed NI-TPCC converter has been validated through simulation and experimental results.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.42-47
• /
• 2019

This paper introduces a modified Wilkinson power divider that uses uniform transmission lines for various terminated impedances and an arbitrary power ratio. For the designed power ratio, the proposed divider changes only the electrical lengths of the transmission lines between the input and output ports, and those between the output ports and the isolation resistor. In this case, even when various termination impedances of the ports exist, the divider characteristics are satisfied. To verify the feasibility of the proposed divider, two circuits were designed to operate at a frequency of 2 GHz with 2:1 and 4:1 power splitting ratios and various terminated impedances of 40, 70, and $60{\Omega}$ for one circuit, and 50, 70, and $60{\Omega}$ for the other. The measurement and simulation results were in good agreement.

• Journal of KIBIM
• /
• v.9 no.4
• /
• pp.21-30
• /
• 2019

Many studies on BIM-based design, construction and operation have already been conducted on roads, railways, etc., but BIM research in the ports and harbors is still lacking. This research develops BIM Library and Technical contents focused on practical usability of ports and harbors infrastructure. We have developed technical content by applying various User Interfaces and workflows, considering the characteristics of ports and harbors design. In order to examine the practical utility of the developed library and contents, we tried modeling the breakwater using these. As a result, we confirmed that collaboration of BIM library and technical contents could significantly improve the productivity of BIM design by increasing library usage and automating repetitive tasks.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.273-280
• /
• 2003

The purpose of this study is to identify and evaluate the competitiveness of ports in ASEAN(Association of Southeast Asian Nations), which plays a leading role in basing the hub of international logistics strategies as a countermeasure in changes of international logistics environments. This region represents most severe competition among Mega hub ports in the world in terms of container cargo throughput at the onset of the 21 st century. The research method in this study accounted for overlapping between attributes, and introduced the HFP method that can perform mathematical operations. The scope of this study was strictly confined to the ports of ASEAN. which cover the top 100 of 350 container ports that were presented in Containerization International Yearbook 2002 with reference to container throughput. The results of this study show Singapore in the number one position. Even compared with major ports in Korea (after getting comparative ratings and applying the same data and evaluation structure), the number one position still goes to Singapore and then Busan(2) and Manila(2), followed by Port Klang(4), Tanjugn Priok(5), Tanjung Perak(6), Bangkok(7), Inchon(8), Laem Chabang(9) and Penang(9). In terms of the main contributions of this study, it is the first empirical study to apply the combined attributes of detailed and representative attributes into the advanced HFP model which was enhanced by the KJ method to evaluate the port competitiveness in ASEAN. Up-to-now, none have comprehensively conducted researches with sophisticated port methodology that has discussed a variety of changes in port development and terminal transfers of major shipping lines. Moreover, through the comparative evaluation between major ports in Korea and ASEAN, the presentation of comparative competitiveness for Korea ports is a great achievement in this study. In order to reinforce this study, it needs further compensative research, including cost factors which could not be applied to modeling the subject ports by lack of consistently qualified in ASEAN.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.199-217
• /
• 2008

Many studies have identified the determinants of shippers' selection of ports, and of these, a number have repetitively cited major elements. However, different researchers came up with somewhat different research results depending on the position and preference of research targets. Accordingly, to deduce the determinants of shippers' selection of Gwangyang Port, appropriate research and analysis is required in addition to literature study. This study first deduced from previous studies the determinants that have influence on shippers when selecting a port and positively analyzed the effects of those determinants on the shippers using Gwangyang Port. In this regard, whether shippers using Gwangyang Port have continuously used the port was set as a dependent variable, and port service, port facilities, location of ports, port costs, and other determinants for port selection deduced in the previous studies were set as independent variables. This study's analysis finds shippers using Gwangyang Port are all influenced by the elements of port service, port facilities, location of ports, and port costs in their selection of Gwangyang Port. Their degree of importance is in the order of port costs, location of ports, port service and port facilities. This indicates that shippers consider port costs and location of ports more important than port facilities in their selection of a port.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.209-239
• /
• 2008

The purpose of this paper is to investigate the effectiveness of Korean port investment by using the newly developed slack-based multi-year panel congestion model of DEA(Data Envelopment Analysis). Inputs[port investment amount, cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, number of ship calls, revenue, and score of customer service satisfaction] are used during 1994-2004 for 20 Korean seaports. Empirical analysis identified congestion especially in port investment as input at the ports of Gunsan, and Busan in the all 3 models, and the ports of Pyungtag, Mogpo, Yeosu, and leju in over 2 models. Port investment induced the rapid increase of port efficiency from the ports of Masan, Incheon, Donghae, and Samcheok. Therefore other ports except these ports should examine the reason about the inefficiency of port investment by searching out the situation of each ports directly. The main policy implication based on the findings of this study is that The Ministry of Land, Transport and Maritime Affairs in Korea should introduce the new measurement way after reviewing the multi-year slack-based congestion approach when the amount of port investment for each port is decided.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.146-157
• /
• 2007

Fishing villages have rich potential on account of serving as a base of fishing activities with various maritime ecosystem, culture and maritime resources as well. The object of the study is ports located in Gijang, Busan and it presents the overall development direction in ports within this area. Through systematic and well-planned developing small-sized ports, this research analyzes regional economic implications by improving settlement conditions for fishing villagers scattered around this area taking the ports' natural traits into consideration. The research correlates regional input output analysis by fishing port arrangement project with connection between inter-industries and inter-regions according to the model of input-output analysis and attempts to systematically analyze regional economic structure with the economic implication divided into production, employment and income, influenced upon by the change of political exogenous variable.

• Journal of Korea Port Economic Association
• /
• v.32 no.2
• /
• pp.105-122
• /
• 2016

Numerous studies have evaluated the status of seaports. However, the majority of the research has approached this topic from the view-point of port capabilities, including locational advantage, infrastructure, productivity, and competitiveness. The position and/or role of a port can be understood more precisely and comprehensively by considering the interconnectivity among ports making up enormous global transportation networks. The main objective of this study is to compare the status of 82 container ports on the trunk shipping routes between Asia and Europe by applying the concepts of structural equivalence and role equivalence proposed by the social network analysis method. Network similarities and differences among competing ports in the regions are assessed by analysing their structural equivalence. Furthermore, the hierarchical structures of the ports located on the trunks between Asia and Northwest Europe and between Asia and the Mediterranean are constructed by evaluating their role equivalence. The results of this empirical research shows that Singapore and Rotterdam possess the most significant positions on the ocean corridors between Asia and Northwest Europe. Singapore also holds a leading position on the Asia-Mediterranean shipping route. Lastly, no ports located in the Middle East or Mediterranean regions have an equivalent weight to those of Rotterdam, Hamburg, Antwerp on the Asia-Northwest Europe route.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.69-84
• /
• 2018

The purpose of this study is to provide a comparative evaluation of container port criteria at four major container ports in the Bay of Bengal, including Colombo Port in Sri Lanka, Chennai Port in India, Chittagong Port in Bangladesh and Yangon Port in Myanmar. Important container port selection criteria are identified and comparisons among container ports are made using previous studies, personal interviews and questionnaires, completed by top shipping companies, freight forwarders, logistics service providers, and experts in Myanmar. The AHP method is used to verify the research model and hypothesis. This study identified five main criteria and eleven sub-criteria when choosing potential regional hub ports among the four ports in the Bay of Bengal. The main findings from the five main criteria suggest that port efficiency is the highest priority criteria, and the second priority is port costs. The criteria of geographical location and available port facilities are the third and fourth most important, respectively, and the last priority is port's hinterland. Regarding the relative competition among these ports, Colombo Port obtained the highest priority among the four influential factors except for port hinterland. This study has certain limitations that will require future research. First, the sample group for the population size is relatively small. Second, interviewees had limited experience answering questionnaires using this methodology and a limited amount of time was available for respondents for the interviews.

• Journal of Korea Port Economic Association
• /
• v.25 no.3
• /
• pp.251-268
• /
• 2009

This study analyzes price competition between two ports theoretically using a game model. We considered two cases: in Case I, consignors are located in a given position, and in Case II, consignors are distributed uniformally between two ports. The results are as follows. In Case I, the higher consignors' preferences for quality are, the more two ports' prices increase. As the locations of consignors are closer to Port H, the price of Port H increases and that of the low quality port(Port L) decreases. In addition, when transportation cost increases, the price of Port L decreases and the price of Port H tends to increase. If the quality of Port H improves, the price of the port H increases but the price of Port L is not clearly determined. In Case II, the higher consignors' preferences for quality are, the more two ports' prices increase. As transportation cost increases, the prices of both ports decrease but the price of Port L decreases twice as fast as that of Port H. In addition, if the quality of Port H improves, the price of Port H increases but the price of Port L decreases when transportation cost is high.