• 제목/요약/키워드: port image

검색결과 294건 처리시간 0.026초

흡입 밸브 각도에 따른 실린더 내 와류 발생 특성 (In-Cylinder Swirl Generation Characteristics according to Intake Valve Angle)

  • 엄인용;박찬준
    • 한국가시화정보학회지
    • /
    • 제3권2호
    • /
    • pp.79-87
    • /
    • 2005
  • Two engines, one is conventional DOHC 4 valve and the other is narrow valve angle, were used to compare the characteristics of swirl motion generation in the cylinder. One intake port is deactivated to induce swirl flow. A PIV (Particle Image Velocimetry) was applied to measure in-cylinder velocity field according to inlet valve angle during intake and compression stroke. The results show that the flow patterns of narrow valve engine are much more stable and well arranged compared with the normal engine over the entire intake and compression stroke except early intake stage, and very strong swirl motion is generated at the end of compression stage in this engine nevertheless using straight port which is unfavorable for swirl generating. In the normal engine, however, strong swirl motion induced during intake stroke is destroyed as the compression progresses.

  • PDF

가솔린 직분식 엔진의 연소실 개발을 위한 분무 및 유동장 해석 (Analysis of Spray and Flow Fields for Development of Spark-ignited Direct Injection Engine)

  • 최규훈;박종호;이내현
    • 한국자동차공학회논문집
    • /
    • 제6권6호
    • /
    • pp.202-209
    • /
    • 1998
  • For development of SDI(Spark-ignited Direct Injection) engine, stratified mixture formation with adequate strength at spark plug was required in wide range of engine operating conditions. So, spray structure under high ambient pressure and spray distribution after impingement on piston bowl in motoring engine was visualized by using laser equipments. Also, incylinder bulk flow structure was measured by using PIV (Paiticle Image Velocimetry) system. Counter-rotating tumble port and bowl piston was found effective to conserve bulk motion directed to spark plug in compression stroke. In addition, mask attached near valve seat in intake port was proposed to attenuate conventional tumble component and enhance counter-rotating tumble component.

  • PDF

Performance Analysis of TH-BPPM and TH-BPAM UWB System and the Applications in Data and Image Transmission

  • Sung, Tae-Kyung
    • 한국항해항만학회지
    • /
    • 제31권2호
    • /
    • pp.159-163
    • /
    • 2007
  • In this paper, we mainly analyze the performance of two ultra wideband communication systems, the classical Time Hopping Binary Pulse Position Modulation (TH-BPPM) UWB system and the Time Hopping Bipolar Pulse Amplitude Modulation (TH-BPAM) UWB system. The performance of TH-BPPM and TH-BPAM is analyzed in detail under an ideal AWGN channel and a correlation receiver. We use the power spectral density function to get the expression of BER of these two UWB systems. It yields simple and exact formulas relating the performance to the system parameters. The analysis shows that TH-BPPM suffers performance degradation with respect to TH-BPAM. Furthermore, we give the computer simulation of both data and image transmission and our simulation results also prove our theoretical analysis.

X-밴드 레이더 이미지 기반 표층해류 계측 분석 (Analysis of Surface Current Measurement Based on X-band Radar Image)

  • 강나윤;이유경;양영준
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2022년도 추계학술대회
    • /
    • pp.323-324
    • /
    • 2022
  • 본 눈문은 X-밴드 레이더 이미지를 이용한 표층해류 계측 비교 결과를 분석한다. 속초해수욕장에 설치된 선박용 X-밴드 레이더를 이용해 2022년 2월 기간 동안 표층해류 계측을 진행하였다. 국립해양조사원 해양 관측 부이의 자료를 기준으로 하여 계측 데이터 비교 및 분석을 통해 표층해류(유속) 계측 정확도를 입증했다.

  • PDF

가상공간에서의 3차원 입체영상과 입체음향 생성에 관한 연구 (A Study on the Creation of Stereoscopic Image and Three-Dimensional Sound in a Virtual Space)

  • 김현라;이규동;임정빈
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2002년도 추계공동학술대회논문집
    • /
    • pp.71-74
    • /
    • 2002
  • 이 연구에서는, 가상현실(virtual reality)분야에서 현실감 있는 가상공간을 구성하는데 중요한 요소인 3차원 입체영상과 입체음향을 하나의 메커니즘으로 구성하기 위한 알고리즘에 대해서 기술하였다 동기화 이중(Sync Doubling) 방식과 머리전달함수(Head Related Transfer Function: HRTF)를 이용하여 간단한 입체 게임을 구성한 후, 4명의 학생을 대상으로 실험한 결과, 3차원 입체영상은 모니터의 전후 방향으로 돌출되거나 함몰되는 현상을 나타냈으며, 영상에 따른 입체음향의 재생도 확인할 수 있었다.

  • PDF

독립성분분석(ICA)기법을 이용한 플로팅 구조물 진동특성분석

  • 황재승;정기범
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2011년도 춘계학술대회
    • /
    • pp.187-188
    • /
    • 2011
  • Independent component analysis (ICA) is a method separating the mixture of signals into statistically and mutually independent ones. It has been applied to not only the Cocktail-party problem but also EEG analysis using the EEG waveform, digital signal processing, image processing and cognitive technique field actively. This study aims to propose a procedure to estimate the modal responses and mode shapes of a floating structure by using the ICA method from measured responses of the floating structure.

  • PDF

라인 스캔 카메라를 위한 고속 영상 처리 시스템 설계 (Design of High-Speed Image Processing System for Line-Scan Camera)

  • 이운근;백광렬;조석빈
    • 제어로봇시스템학회논문지
    • /
    • 제10권2호
    • /
    • pp.178-184
    • /
    • 2004
  • In this paper, we designed an image processing system for the high speed line-scan camera which adopts the new memory model we proposed. As a resolution and a data rate of the line-scan camera are becoming higher, the faster image processing systems are needed. But many conventional systems are not sufficient to process the image data from the line-scan camera during a very short time. We designed the memory controller which eliminates the time for transferring image data from the line-scan camera to the main memory with high-speed SRAM and has a dual-port configuration therefore the DSP can access the main memory even though the memory controller are writing the image data. The memory controller is implemented by VHDL and Xilinx SPARTAN-IIE FPGA.

부산 신항만 욕망산 경관계획 (Mt. Yokmang Landscape Planning in Busan New Port)

  • 김충식
    • 한국조경학회지
    • /
    • 제33권6호
    • /
    • pp.127-139
    • /
    • 2006
  • Mt. Yokmang landscape design awarded first in [North container terminal site furtherance construction in Busan new port], design competition sponsoring in the Korea Container Terminal Authority in 2005. Design guideline was to propose the symbol of new port and to establish landscape plan in consideration of view and geological location. Because landscape plan required establishment of restoration plan for cutting slope, Mt. Yokmang became the major object. The purpose of planning are as follows. The first purpose is to minimize existent natural environment damage, and the second, to connect with ambit and create new image. The third is to provide place of rest and interchange for local resident. Reflecting stratum structure and landscape characteristics, cutting slope consisted of [utilization slope], [presentation slope], [landscape slope], and [ecological slope]. Vegetation design applied ecological restoration method through restoration of stratum, and eve environment-friendly afforestation, planned program that can connect area with existing ecosystem. In process that decides form of the cutting slope, analyze view structure and visual exposure in various access routes, sensitivity etc. was accomplished. Also, symbolic tower(Ocean Polaris) that presents in architecture and landscaping features, night landscape planning could gain synergy effect by keeping consistence with landscape and ecological planning. Passing through final design and construction process, I expect that the Mt. Yokmang will be a new landmark in Busan new port.

디스플레이포트 인터페이스의 AUX 채널 설계 (A Design of DisplayPort AUX Channel)

  • 차성복;윤광희;김태호;강진구
    • 전기전자학회논문지
    • /
    • 제14권1호
    • /
    • pp.1-7
    • /
    • 2010
  • 본 논문은 디스플레이포트 v1.1a 표준에 적합한 AUX(Auxiliary) 채널 구현에 대한 논문이다. 디스플레이포트는 영상 및 음성을 전달하기 하기 위해 메인 링크, AUX 채널, 핫 플러그 검출 라인을 사용한다. 등시적 전송 서비스를 제공하기 위해서 소스 디바이스는 메인 링크를 통해 전달될 영상 및 음성 신호를 특정 형태로 변환하여 재구성하고 싱크 디바이스로 전달한다. AUX 채널은 메인 링크를 구성하고 유지하기 위해 링크 서비스를 제공한다. 그리고 디스플레이 장치가 소스 디바이스에서 전송된 데이터를 정상적으로 나타낼 수 있는지 파악하기 위해 디바이스 서비스를 제공한다. 핫 플러그 검출 라인은 두 디바이스간의 연결을 확인하기 위해서 사용한다. 본 논문은 AUX 채널 구현을 목표로 설계하였으며 설계된 시스템은 SoC Master3를 이용하여 검증을 수행하였다. 합성 툴은 Xilinx ISE 9.2i를 사용하여 3315개의 LUTs와 1466개의 Flip Flops을 사용하였고 최대 168.782MHz 동작 속도의 결과를 얻었다.

국제항만 운영의 지속가능성을 확보하기 위한 지속가능활동 (Sustainability Practices to Achieve Sustainability in International Port Operations)

  • 김시현;장봉규
    • 한국항만경제학회지
    • /
    • 제30권3호
    • /
    • pp.15-37
    • /
    • 2014
  • 지속가능성은 경제적, 사회적 그리고 환경적 이슈를 아우르는 광의의 개념으로 해석된다. 이 논문은 2013년 초 부산항에서 수행한 인터뷰를 기반으로 항만운영의 지속가능 활동을 개념화함으로써 국제항만 운영의 지속가능성 확보를 위한 전략적 의사결정을 돕고 또한 향후 관련 연구에 초석을 마련하고자 한다. 빈도 및 패턴 분석을 이용하여, 지속가능 활동은 환경친화적 기술, 지속적인 관리와 향상, 내적 성장, 대화와 협력 등을 포함하는 것으로 밝혀졌다. 분석결과, 항만 및 항만관계자의 현재와 미래 요구사항을 수용할 수 있는 전략적/운영적 활동으로서의 지속가능 활동의 역할이 확인되었다. 지속가능 활동을 실천하는데 있어서 나타나는 장벽과 도전과제를 보여줌으로써, 연구결과는 항만이 지속가능 활동을 도입하고 실천하도록 하는 전략적 과제에 대한 유용한 정보을 제공한다.