• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1251-1258
• /
• 2002

The weather FAX machine is the one of necessary of safety navigation for ship. which is the machine which make the weather image by the receiving radio signal which is modulated using FSK method and transmitted on air by coast station. after Coast station scan the weather image and broadcast the image with black dot to 1500Hz and white dot to 2300Hz using FSK modulation. This paper implement weather fax machine using only general IBM-PC by software. By using IBM-PC we can make some good functions like print, edit, save etc. The modulated signal from SSB go into RS232C port via photo coupler not to give damage to PC. by using Timer Interrupt and RS232C serial interrupt, we can measure signal frequency and remake weather image. This paper use only IBM-PC with general SSB receiver which is widely spread on the ship. so this is very economic and possible to implement mutifunctions.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.379-385
• /
• 2012

The purpose of this study is to propose that co-working plan with patient information service system for dental clinic and dental lab using smart phone system which is recently spread to. For this purpose, we introduced latest mobile S/W development environment. And design key features of patient information service system based on mobile platform(Android) by user interface design. In fact, we have applied this system(mobile system) to dental clinic and dental lab, we have following results: 1.There were significant possibility in dental utilization of smart phone based on latest ICT(Information & Communication Technology) technology. 2. Improve conventional method of image upload by connecting digital camera to the server computer using USB port. 3. Reduce error of image management by direct upload to server computer from smart phone. 4. Improve process of making prosthetic appliance by displaying dental image on smart phone in dental lab.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.1
• /
• pp.18-24
• /
• 1999

The satellite image acquired by RADARSAT SAR on August 15, 1996 reveals internal waves in north coastal waters of Cheju Island. It is indicated from the image data, the tidal elevation data, and the bottom topography data, the internal waves seem to be generated by interaction between shallow bottom and tidal currents travelling in the stratified water in the summer time during the tidal changeovers from ebb to flood. The internal waves generated in such condition show patterns of trains of solitons. Probable amplitude of observed solitons is calculated using estimation of the soliton wave length from SAR image data and K-dV equation. Detection of the internal waves is very significant not only to military strategist for underwater maneuvers such as operation of submarines, but also to physical and biological oceanographers. Temporal and spatial variation of the internal waves are needed to be measured by simultaneous in-situ field study together with SAR to examine the nature of these internal waves.

• Smart Media Journal
• /
• v.11 no.11
• /
• pp.25-31
• /
• 2022

Deep learning-based image processing is essential for autonomous vehicles. To process road images in real-time in a System-on-Chip (SoC) environment, we need to execute deep learning models on a NPU (Neural Procesing Units) specialized for deep learning operations. In this study, we imported seven open-source image processing deep learning models, that were developed on GPU servers, to Texas Instrument Deep Learning (TIDL) NPU environment. We confirmed that the models imported in this study operate normally in the SoC virtual environment through performance evaluation and visualization. This paper introduces the problems that occurred during the migration process due to the limitations of NPU environment and how to solve them, and thereby, presents a reference case worth referring to for developers and researchers who want to port deep learning models to SoC environments.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.517-520
• /
• 2002

Stereoscopic particle image velocimetry is a measurement technique to acquire of three dimensional velocity field by two cameras. With a laser sheet illumination, the third velocity component can be deduced by out-of-plane velocity components using a stereoscopic matching method. Industrial fluid flows are almost three dimensional turbulent flows, so it is necessary to use the stereoscopic PIV measurement method. However the existing stereoscopic PIV system seems hard to use since it is very expensive and complex. In this study we have developed a Stereoscopic Miniature PIV(MPIV) system based on the concept of the Miniature PIV system which we have already developed. In this paper, we address the design and some first experimental results of the stereoscopic PIV system. The Stereoscopic MPIV system features relatively modest performances, but is considerably smaller, cheaper and easy to handle. The proposed Stereoscopic MPIV system uses two one-chip-only CMOS cameras with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed).

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1775-1783
• /
• 2001

For two decades, there has been an active research to enhance the performances of Particle Image Velocimetry (PIV) systems. However, the resulting systems are somewhat very costly, cumbersome and delicate. In this paper, we address the design and some first experimental results of a PIV system belonging to the opposite paradigm. The Miniature PIV or MPIV system feature relatively modest performances, but is considerably smaller (out MPIV could hold in dia. 40 mm$\times$120 mm), cheaper (out MPIV total cost is less than $500) and easy to handle. Potential applications include industrial velocity sensors. The proposed MPIV system uses a one-chip-only CMOS camera with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC or laptop) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed). In our first MPIV prototype presented in this paper, the strobe lighting is generated by a cheap 5 mW laser pointer diode. Experimental results are presented and discussed.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.559-562
• /
• 1999

In this paper, we developed on internet based assembly information display system for the blind. The system is consist of hardware and software. The hardware is consist of a voice synthesis device and a tactile display for character information, and the software is consist of internet web browser for the blind and braille program. The tactile-device system consists of a control unit, pin array, pin generator, serial port, and a power supply. The pin exerted by a electromagnetic method, solenoid. The internet web browser separates the character and image from internet web page, and character information in the web page is converted to braille and fed to sound system. Also the image in the web page can be printed developed tactile display. As the results of experiment, the blind could access the internet web site by using this system and understand various internet information.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.165-171
• /
• 2005

we can define the procedure of Authoring that it makes area cord and the reproduction prevent menu programmed into MPEG II video stream , Audio which is AC-3 audio stream and subtitle under its own category. And it makes process an attribute, an order and an operation, gives the last disk image (DVD). There are various types of Authoring tools in the market so that authoring tools can enable, encourage, and assist users ('authors') in the selection of tools that produce simple title and video production and editing suites. In this paper, we will compare and analyze authoring process in which image and sound are captured into DVD creation with IEEE 1394port with regard to Window system using generally with Desktop PC and the Macintosh of the PC on the system of Windows and OSX.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.145-151
• /
• 2005

We can define the procedure of Authoring that it makes area cord and the reproduction prevent menu programmed into MPEG II video stream , Audio which is AC-3 audio stream and subtitle under its own category. And it makes process an attribute, an order and an operation, gives the last disk image, Which is DVD(digital versatile disc). There are various process of Authoring tools in the market so that authoring tools can enable, encourage, and assist users ('authors') in the selection of tools that produce simple title, video production and editing suites. In this paper, we will compare and analyze authoring process in which image and sound are authorized into DVD with IEEE 1394port between Window system using generally with Desktop PC and the Macintosh that is based on OSX.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.148-156
• /
• 2008

This paper is the first of 2 companion papers which investigate in-cylinder swirl generation characteristics according to inlet valve angle. Two DOHC 4 valve engines, one has wide intake valve angle and the other has narrow valve angle, were used to compare the characteristics of swirl motion generation in the cylinder. One intake port was deactivated to induce swirl flow. A PIV (Particle Image Velocimetry) was applied to measure in-cylinder velocity field according to inlet valve angle during intake stroke. The results show that the stronger swirl motion is observed in wide valve angle engine at the early intake stage; however, the swirl motion is gradually distorted by the intake flow component passing through valve area near the cylinder wall as the stroke proceeds. The tumble motion also does so in wide angle. On the contrary, the swirl and tumble motions, which are not clear at the initial stage, become better and better arranged as the piston goes down and up again after bottom dead center.