• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.79-86
• /
• 2018

본 연구에서는 폴리비닐 알코올 계면활성제와 폴리메틸 하이드로 실록산을 혼합하여 에멀젼 형태의 소수성 혼화제를 제조하였으며, 이를 적용한 모르타르의 강도와 역학적 성질을 평가하였다. 개발된 소수성 혼화제는 강도 감소가 나타나지 않았으며, 산화마그네슘 혼입 모르타르는 조기에 강도가 발현되는 것으로 나타났다. 수밀성의 경우에는 모르타르에 소수성 혼화제를 직접 배합한 경우에 투수계수가 크게 감소하는 것으로 분석되었으나, 메타카올린에 의한 효과는 크지 않은 것으로 관찰되었다. 표면의 소수성은 표면을 코팅한 시편에서 접촉각이 증가하여 소수성 표면을 만드는 것은 확인되었으며, 혼화제에 사용된 섬유와 메타카올린의 혼입율이 최적화되지 않아 초소수성 표면을 갖지는 못하는 것으로 분석되었다.

• KSBB Journal
• /
• 제17권3호
• /
• pp.241-246
• /
• 2002

오늘날 섬유 염색공정에서 발생하는 염색폐수로 인해 많은 문제점들을 야기한다. 염색폐수에는 난분해성의 EG, PVA, TPA, 여러 종류의 계면활성제가 포함되어 있어 완전하게 처리하기가 어렵다. 현재 일반적으로 사용하고 있는 물리화학적 처리와 활성오니공정의 처리성을 향상하기 위하여 jet-loop reactor (JLR)와 물리화학적 처리를 결합한 새로운 공정을 개발하였다. JLR의 부피산소전달계수는 air-lift 반응기에 비해 아주 우수하였다. 또한 좀더 효율적인 처리를 위하여 JLR에 활성탄 담체를 적용하여 (JLRAS) 실험하였다. 체류시간이 8시간일 때 BOD, $COD_{Mn}$, $COD_{Cr}$, 색도 제거율은 각각 99, 86, 84, 83%로 우수하였다. JLRAS 성능은 $COD_{Mn}$의 부하 변동에도 아주 빠르게 회복되었다. 2차 물리화학적 응집처리의 최적 응집제로는 폴리황산제2철이며 130 mg/L 투입하였을때 $COD_{Mn}$과 색도의 제거율은 자각 85, 73%였다. 결론적으로 이 공정으로 난분해성의 많은 유기물을 효율적으로 처리할 수 있으며 운전비용도 감소시킬 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.181-189
• /
• 2008

The aim of this study was to evaluate the effects of $Ca^{2+}$, $HCO_3{^-}$ and BSA on the in vitro capacitation-associated protein tyrosine phosphorylation, hyperactivation and acrosome reaction in guinea pig sperm. Caudal epididymal sperm were incubated in four different groups: modified TALP (Tyrode's albumin lactate pyruvate) or TALP without one of the medium constituents ($Ca^{2+}$, $HCO_3{^-}$ and BSA). After incubation for the required time (0 h, 0.5 h, 1 h, 3 h, 5 h, and 7 h), sperm were removed for further experiment. The capacitation effect was assessed by CTC (Chlortetracycline) staining. Western blotting and indirect immunofluorescence were used to analyze the level and localization of tyrosine phosphorylation. The results showed that guinea pig sperm underwent a time-dependent increase in protein tyrosine phosphorylation during the in vitro capacitation and the percentage of protein tyrosine phosphorylated sperm increased from 36% to 92% from the beginning of incubation to 7 h incubation. Also, there was a shift in the site of phosphotyrosine-specific fluorescence from the head of sperm to both the head and the flagellum. Moreover, an absence of $Ca^{2+}$ or $HCO_3{^-}$ inhibited in vitro hyperactivation and acrosome reaction and decreased the phosphorylation of the proteins throughout the period of in vitro capacitation. However, an absence of BSA could not influence these processes if substituted by polyvinyl alcohol (PVA) in the medium.

• 대한수의학회지
• /
• 제38권2호
• /
• pp.394-400
• /
• 1998

Cryopreservation of embryos by vitrification is a simple method to preserve bovine embryos for subsequent embryo transfer, but embryonic viability after vitrification has been inconsistent and low compared with conventional slow freezing. The aim of the present study is to examine the effect of serum or serum albumin in a vitrification solution and epidermal growth factor(EGF) or fibroblast growth factor(FGF) on in vitro viability of bovine blastocysts frozen by vitrification. Bovine blastocysts were produced by in vitro maturation, fertilization of follicular oocytes and culture of embryos in a synthetic oviduct fluid medium(SOFM) containing BSA and 19 essential and nonessential amino acids. Blastocysts with excellent or good morphology were selected at 7 or 8 days after culture and utilized for vitrification. In experiment 1, blastocysts were vitrified in a solution containing semi-fetal calf serum(SFCS) or BSA(5 or 10mg/ml) and then their subsequent viabilities were examined by culturing thawed embryos in a SOFM containing BSA and 19 amino acids. Effect of EGF or FGF added to a SOFM containing polyvinyl alcohol(PVA) on the viability of vitrified-thawed blastocysts was investigated in experiment 2. BSA added at 5 or 10mg/ml to a vitrification solution showed significantly higher(p < 0.05) developmental rate to expanded and hatching blastocysts than SFCS, but there was no significant difference in the developmental rate to hatched blastocysts after thawing. Supplementation of a culture medium with EGF and/or FGF significantly increased(p < 0.05) embryo development to expanded blastocysts compared with control but showed no beneficial effect on the development to hatching or hatched blastocysts. Coculture of thawed embryos with granulosa cells in a TCM 199 containing 10% fetal calf serum(FCS) showed the highest developmental rate to expanded, hatching and hatched blastocysts among the groups tested. In conclusion, supplementation of a vitrification solution with BSA at 5mg/ml and culture of thawed blastocysts in a medium containing EGF and/or FGF can improve in vitro viability of bovine blastocysts frozen by vitrification.

• 한국약용작물학회지
• /
• 제28권2호
• /
• pp.128-135
• /
• 2020

Background: Sowing seeds of Adenophora triphylla is known to be difficult owing to their small size and irregular seed shape. Therefore, this study was conducted to develop a seed pelleting technique to save labor during sowing. Methods and Results: To identify the optimal germination temperature for A. triphylla seeds, the temperature range was set from 17℃ to 32℃. Germination surveys were conducted in plastic greenhouse conditions in March, April, and May to determine the appropriate sowing time. The optimal germination temperature for A. triphylla seeds was 29℃ and May was the optimal sowing time in plastic greenhouse conditions. Covering materials for seed pelleting used talc (T), kaolin (K), calcium carbonate (C), and vermiculite (V). The pellet binder used agar (A), pectin, xanthan gum, polyvinyl alcohol (PVA), and sodium alginate (S). The best suited treatment mixture were the best suited in kaolin / calcium carbonate / vermiculite (KCV), talc / calcium carbonate / vermiculite (TCV) mixture treatment for covering material, and sodium alginate (S), agar (A) as pellet binder, respectively. The germination rate was the best in TCV mixed with S. Conclusion: The mixture of TCV (2 : 1 : 3) + 1.5% S (TCVS), was found to be the best pelleting materials for A. triphylla seeds, and seed pelleting can be labor-saving during sowing.

• Journal of Microbiology and Biotechnology
• /
• 제23권4호
• /
• pp.473-482
• /
• 2013

The desulfurization ability of Sphingomonas subarctica T7b was evaluated using resting and immobilized cells with dibenzothiophene (DBT), alkyl DBTs, and commercial light gas oil (LGO) as the substrates. The resting cells of S. subarctica T7b degraded 239.2 mg of the initial 250 mg of DBT/l (1.36 mM) within 24 h at $27^{\circ}C$, while 127.5 mg of 2-hydroxybiphenyl (2-HBP)/l (0.75 mM) was formed, representing a 55% conversion of the DBT. The DBT desulfurization activity was significantly affected by the aqueous-to-oil phase ratio. In addition, the resting cells of S. subarctica T7b were able to desulfurize alkyl DBTs with long alkyl chains, although the desulfurization rate decreased with an increase in the total carbon number of the alkylated DBTs. LGO with a total sulfur content of 280 mg/l was desulfurized to 152 mg/l after 24 h of reaction. Cells immobilized by entrapment with polyvinyl alcohol (PVA) exhibited a high DBT desulfurization activity, including repeated use for more than 8 batch cycles without loss of biodesulfurization activity. The stability of the immobilized cells was better than that of the resting cells at different initial pHs, higher temperatures, and for DBT biodesulfurization in successive degradation cycles. The immobilized cells were also easily separated from the oil and water phases, giving this method great potential for oil biodesulfurization.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권4호
• /
• pp.49-56
• /
• 2015

초고성능 콘크리트는 높은 강도와 유동성을 갖는 우수한 재료 특성을 나타내는 콘크리트이다. 그러나 고연성 시멘트 복합체에 비하여 낮은 연성을 나타낸다. 이 연구에서는 강섬유와 마이크로섬유의 조합이 초고성능 콘크리트의 인장거동에 미치는 영향을 조사하였다. 이를 위하여 강섬유와 폴리에틸렌, 폴리비닐알코올, 현무암섬유 조합에 따라 4가지 초고성능 콘크리트 배합을 결정하였고, 인장거동을 평가하기 위하여 직접인장 실험을 수행하였다. 또한 마이크로섬유가 제조과정에서 의도하지 않은 과도한 기포를 생성하는지를 확인하기 위하여 밀도실험을 수행하였다. 실험결과 인장강도가 높은 폴리에틸렌섬유는 초고성능 콘크리트의 인장거동을 향상시키는데 효과적임을 확인하였고, 현무암섬유는 초고성능 콘크리트의 균열강도 및 인장강도를 증가시키는데 효과적임을 확인하였다. 또한 마이크로섬유가 의도하지 않은 기포를 생성하지 않는다는 것도 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.925-928
• /
• 2008

최근 내진부재 및 기존 구조물의 내진보강요소의 손상제어(Damage tolerance)성능을 충족할 수 있는 변형경화형 시멘트 복합체(Strain-hardening cement composites, SHCC)의 개발 및 활용 연구가 진행 중이며, 하이브리드화에 따른 경제성 및 성능향상 가능성도 보고되고 있다. 그러나 이러한 우수한 성능을 갖는 SHCC 재료가 실구조물의 보수/보강재 및 내진보강부재에 적용되기 위해서는 우수한 인장성능 발현뿐만 아니라, 보강섬유의 단가를 고려한 경제적 효과(Economical efficiency) 및 시공성 (Workability)이 요구된다. 따라서 본 연구에서는 SHCC를 내진부재 및 보강재료로써 적용하기 위한 연구의 일환으로 합성섬유를 하이브리드하여 혼입시 휨 및 인장강도, 변형능력 등 거동특성을 분석함으로써 각 보강섬유의 인장강도 탄성계수 등 기계적 특성과 혼입율에 따른 재료성능과의 상관관계를 비교 분석하여 평가하고자 한다. 또한 물시멘트비를 변수로 하여 시멘트 복합체의 강도특성과 보강섬유의 부착특성 및 균열제어성능을 규명하고자 한다. 이러한 결과를 근거로 향후 SHCC 재료의 실구조물 적용시 요구성능 및 경제성을 고려한 재료배합에 관한 기초자료를 제시하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.909-912
• /
• 2008

최근 섬유보강 시멘트 복합체에 관한 연구 중 초기균열 이후 2% 이상의 변형률 이상에까지 인장응력을 증가시킬 수 있는 변형경화형 시멘트 복합체(Strain-Hardening Cement Composite, SHCC)에 관한 연구가 이루어지고 있으며, 이러한 SHCC는 혼입되는 보강섬유의 물리적 형상, 기계적 특성 및 혼입율을 조정함으로써 소요인장성능을 발현시킬 수 있다. 그러나 SHCC 제조시, 혼입되는 보강섬유와의 부착성능을 증진시키기 위하여 규사(Silica powder)와 같이 미세한 직경($105{\sim}120{\mu}m$)의 잔골재를 사용함으로써 타설 후 양생기간 동안 건조수축량이 일반 콘크리트에 비해 심각하여 SHCC 제조시 양생조건에 특별한 주의를 기울여야 한다. 따라서 본 연구에서는 SHCC 양생방법 중 양생온도가 경화후 SHCC의 인장성능에 미치는 영향을 실험적으로 평가하고자 하였으며, 실험결과를 바탕으로 SHCC가 소정의 성능을 발현할 수 있는 양생조건을 실험적으로 규명함으로써 향후 SHCC 프리캐스트 구조부재 제작시 적절한 양생방법을 실시하기 위한 기초자료를 제시하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.71-74
• /
• 2007

With the changes of times the building materials tend to extend the demand for application under the special environment. Since high-ductile mortar is developed, the building materials show excellent performance like toughness, compression, tensile, and bending, etc. in the general concrete from the existing brittle point. And, recently they are widely used as repairing and reinforcing materials both at home and abroad because they are recognized as excellence like durability and fire-resistance. However, it is in a situation of creating problems in durability because it frequently happened deterioration of buildings that have already repaired and reinforced at a time when it requires reconstruction of recently deteriorated construction structure recently. Therefore, in this study improved with a more repair Material development and reinforcement of the second high-ductile mortar products for a variety of basic materials were presented want, research plans used include traditional repair materials and the newly developed PCM (polymer cement mortar) structural reinforcement type indicated that comparison. PCM analysis in order to present a rate depending on the types fiber 0, 1.2 and 2.0(%) at three levels and mixture water according to ratios of weight to Plain in the 2.0 and 1.85(kg) at two levels is set, the results were as follows. 1) This study has shown that PCM had excellent strain hardening behavior at the same time that the bending stress increased according to the fiber contents. 2) This study has shown that it had the durability performance due to the high substance transmission according to the fiber contents.