• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.100-107
• /
• 2014

Plastic has been widely used in modern artworks' materials due to its merits of process ability and mass production. In the country, value of plastic artifact is increasing but the field of plastic study is limited to industrial purpose. In this study, Identification methods of plastic were performed by SPME-GC/MS and pyrolysis-GC/MS using trace of samples. As a result of identification using SPME-GC/MS, aromatic compounds were identified from polyvinyl chloride. And alkane compounds were identified from polyethylene, and polypropylene. Aromatic compounds were identified from polystyrene, and diethylene glycol appeared in polyurethane based on polyester was identified from polyurethane. As a result of identification using pyrolysis- GC/MS, aliphatic alkenes compounds and phthalate(DEHP) were identified from polyvinyl chloride. Aliphatic alkenes compounds and phthalate(DIBP) were detected from polyethylene. 1-hexene, etc., were detected from polypropylene, aromatic compounds were identified from polystyrene, and methylene diphenyl diisocyanate which is polyurethane basic material was confirmed from polyurethane. This study suggested that non-destructive SPME and pyrolysis-GC/MS are useful to identify compounds particularly polystyrene and polyurethane. These two analytical methods were expected to be applied for identification of unidentified plastic artworks before conservation treatment.

• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.274-280
• /
• 2004

Sorage modulus(G'), Impact and rebounding properties of polyurethane(PU), phylon(PH) and injection phylon(IP) foams were studied. The storage modulus of PU foam was dramatically increased with decreasing temperature. But the storage modulus(G') of IP and PH foams were not affected by temperature. The Impact force of PU foams was increased with decreasing temperature. But in the cases of IP and PH foams, the impact forces were not changed with temperature below $20^{\circ}C$. Impact farces of IP and PH foams were increased with the temperature above $20^{\circ}C$, but that of PU foam was not changed. Rebounding resilience of PU foam was lower than those of IP and PH foams from $-20^{\circ}C$ to $40^{\circ}C$.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.258-265
• /
• 2005

To study the compressive stress, recovery force and permanent strain of foams for footwear midsole, polyurethane(PU), phylon(PH) and injection phylon(IP) foams were repetitively compressed with constant compressive stress. Maximum compressive stress of PU did not decrease with repetitive compression on the constant compressive stress, but that of IP largely decreased. Engineering strain of foams were formed by repetitively compressing the three types of foam. The engineering strain of PU was smaller than that of IP and PH. Compressive stress and recovery force of IP and PH at certain strain were decreased with repetitive compression, but that of PU was not noticeably changed.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.3
• /
• pp.163-169
• /
• 2003

In order to develop a film-forming transdermal drug delivery system, polyurethane (PU) based on poly(ethylene glycol) and poly(tetramethylene oxide) was synthesized and characterized. The synthesized PU was blended with Gantrez ES 225 (GT) to improve the adhesion property of film-forming agent to the skin. When film-forming gel formulation containing 3% ketoprofen (KP) was applied, transparent thin film was obtained within 5 minutes and adhered to the skin for 8 hours. In vitro percutaneous absortion studies were performed to determine the rate of ketoprofen absorption through guinea pig skin. A prominent effect of limonene on the skin permeability of ketoprofen was observed among the various skin permeation enhancers investigated. Considering mechanica properties of film and skin permeability of ketoprofen, 2% of limonene was optimal content in the film forming transdermal formulation.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.374-374
• /
• 2006

Poly (N-isopropylacrylamide) (PNIPAAm) shows a lower critical solution temperature (LCST) at $32^{\circ}C$. Consequently, its thermosensitivity has extensively been investigated in coating materials as well as biomedical and agricultural industry. However, mechanical properties of the swollen gels are generally poor and reinforcement is often desired. A series of interpenetrating polymer networks (IPNs) and emulsion blends hydrogels of polyurethane (PU) and PNIPAAm were prepared in order to overcome the shortcomings of a normal PNIPAAm hydrogels. Regarding the mechanical reinforcement of swollen gel, a significant increase in compression and tensile properties has been obtained by incorporating PU.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.277-278
• /
• 2005

미생물 고정화를 위하여 PU 폼을 세 가지 처리 방법으로 처리하였다. 플라즈마 처리, 플라즈마 유도 그라프팅, 플라즈마 유도 그라프팅 후 플라즈마로 재처리 방법을 사용하였다. 플라즈마 처리는 bacteria adhesion에 큰 효과를 주지 못하였고, 아크릴산의 플라즈마 유도 그라프팅은 adhesion을 세 배 이상 증가시켰다. Bacteria의 adhesion 성능 향상은 표면의 친수성을 증가시키고 새로운 groove나 cavity들을 형성시킴으로 가능하였다. 반면, 그라프팅 후 plasma re-treatment는 미생물 고정화를 크게 향상시키지 못하였다. SEM 관찰을 통하여 대부분의 E.coli.는 groove나 cavities라는 shear-free area에 서식함을 알 수 있었다. PU폼의 bacteria adhesion은 미생물과 고분자 표면 사이의 정전기적 인력이나 van der Waals 인 력에 의해 주로 영향을 받는다고 사료된다.

• Carbon letters
• /
• v.23
• /
• pp.17-21
• /
• 2017

Polyurethane (PU) nanofibers containing graphene oxide (GO) and Ag doped functionalized reduced graphene oxide (Ag-RGO) were successfully prepared via the electrospinning technique. The uniform distribution of GO sheets along with Ag nanoparticle in the nanofibers was investigated by scanning electron microscopy and the elemental mapping technique. X-ray diffraction and thermal gravimetric analysis verified the presence of GO and Ag in the bicomposite nanofibrous mats. Antibacterial tests against Escherichia coli demonstrated that the addition of GO and Ag-RGO to the PU nanofiber greatly enhanced bactericidal efficiency. Overall, these features of the synthesized nanofibers make them a promising candidate material in the biomedical field for applications such as tissue engineering, wound healing, and drug delivery systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3089-3095
• /
• 2013

The headliner was made of polyurethane(PU) and glass fiber(GF) composite materials are widely used as a sound insulation material. A large amount of waste materials occurs as a by-product in the headliner manufacturing process. In order to efficiently reuse the headliner waste materials, separation process of the components are very necessary. According to the results of thermal analysis, weight loss showed increase in the order polyurethane foam> non-foaming polyurethane> non-woven fabric> 1st layer> glass fiber in the range of up to $400^{\circ}C$. Analysis of the DSC characteristics, HDPE, LLDPE, PP, and Master Batch by adding additives the wasted scrap. As a result, except for the PP, there was no exothermic transition due to the crystallization.

• Elastomers and Composites
• /
• v.58 no.4
• /
• pp.208-215
• /
• 2023

In this study, the properties of polyurethane-polydimethylsiloxane (PU-PDMS) hybrid foams containing different types and contents of physical blowing agents (PBAs) were investigated. Two types of blowing agents, namely physical blowing agents and thermally expandable microspheres (TEM), were applied. The apparent density was measured using precisely cut foam samples, and the pore size was measured using image software. In addition, the microstructure of the foam was confirmed via scanning electron microscopy and transmission electron microscopy. The thermal conductivities related to the microstructures of the different foams were compared. When 0.5 phr of the hydrocarbon-based PBA was added, the apparent density and pore size of the foam were minimal; however, the pore size was larger than that of neat foam. In contrast, the addition of 3 phr of TEM effectively reduced both the apparent density and pore size of the PBAs. The increase in resin viscosity owing to TEM could enhance bubble production stability, leading to the formation of more uniform and smaller pores. These results indicate that TEM is a highly efficient PBA that can be employed to decrease the weight and pore size of PU-PDMS hybrid foams.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.262-267
• /
• 2001

Insulating rubber gloves with antibacterial and withstand voltage properties were prepared by blending the natural rubber latex(NRL), waterborne polyurethane(PU) and 4N-chitosan. Tensile strength of rubber glove increased with increasing amount of PU, and elongation decreased. The property of withstand voltage of rubber gloves improved with increasing leaching time, and the rubber gloves showed insulating capability of 10000V at leaching time of 3 hours. Little bacteria existed after 4N-chitosan was added to rubber gloves.