• 센서학회지
• /
• 제21권2호
• /
• pp.109-113
• /
• 2012

We propose an improved interpolating equation to express temperature-resistance characteristics for modern industrial platinum resistance thermometers (PRTs). Callendar-van Dusen equation which has been widely used for platinum resistance thermometer fails to fully describe temperature characteristics of high quality PRTs and leaves systematic residual when the calibration point include temperatures above $300^{\circ}C$. Expanding Callendar-van Dusen to higher-order polynomial drastically improves the uncertainty of the fitting even with reduced degrees of freedom of the fitting. We found that in the fourth-order polynomial fitting, the third-order and fourth-order coefficients have a strong correlation. Using the correlation, we suggest an improved interpolating equation in the form of fourth-order polynomial, but with three fitting parameters. Applying this interpolating equation reduced the uncertainty of the fitting to 32 % of that resulted from the traditional Callendar-van Dusen. This improvement was better than that from a simple third-order polynomial despite that the degrees of the freedom of the fitting was the same.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.115-123
• /
• 2017

Electrochemical noise signals in many cases exhibit a DC drift that should be removed prior to further data analysis. Polynomial fitting and moving average removal method have been used to remove trends of electrochemical noise (EN) in time domain. The corrosion inhibition of synthesized schiff base N,N'-bis(3,5-dihydroxyacetophenone)-2,2-dimethylpropandiimine on API-5L-X70 steel in hydrochloric acid solutions were used to study the effects of drifts removal methods on noise resistance calculation. Also, electrochemical impedance spectroscopy (EIS) was used to study the corrosion inhibition property of the inhibitor. The results showed that for the calculation of $R_n$, both methods were effective in trend removal and the polynomial with m=4 and MAR with p=40 were in agreement.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.20-25
• /
• 2006

Low frequency towed line array with high array gain and beam resolution is a long range surveillance sensor for anti-submarine warfare. The beam characteristics is however deteriorated due to the distorted line array sensor caused by low towing speed, wind, current, and towing ship maneuvering. An adaptive beamforming method is utilized in this paper to enhance the distorted line array beam performance by estimating and compensating the nonlinear array shape. A polynomial curve fitting in the least square sense is used to estimate the array shape iteratively with the distributed heading sensors data along the array. Real time array shape estimation and nonlinear array beam calculation is applied to a very long towed line array sensor system and the beam performance is evaluated and compared to the linear beamformer for the simulation and sea trial data.

• 한국지능시스템학회논문지
• /
• 제13권5호
• /
• pp.571-575
• /
• 2003

In this paper, we describe a method for fuzzy polynomial regression analysis for fuzzy input--output data using shape preserving operations for least-squares fitting. Shape preserving operations simplifies the computation of fuzzy arithmetic operations. We derive the solution using mixed nonlinear program.

• 대한수학회논문집
• /
• 제21권2호
• /
• pp.397-407
• /
• 2006

We construct polynomial-fitting interpolation rules to agree with a function f and its first derivative f' at equally spaced nodes on the interval of interest by introducing a linear functional with which we produce systems of linear equations. We also introduce a matrix whose determinant is not zero. Such a property makes it possible to solve the linear systems and then leads to a conclusion that the rules are uniquely determined for the nodes. An example is investigated to compare the rules with Hermite interpolating polynomials.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.769-776
• /
• 2006

A measured frequency response function can be represented as a ratio of two polynomials. A curve-fitting of frequency responses with Legendre polynomialis suggested in the paper. And the suggested curve-fitting algorithm is based on the least-square error method. Since the Legendre polynomials satisfy the orthogonality condition, the curve-fitting with the polynomials results to more reliable curve-fitting than ordinary polynomial method. Though the proposed curve-fitting with Legendre polynomials cannot cover all frequency range of interest, example shows that the suggested method is quite applicable in a limited frequency band.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.119-122
• /
• 1986

An algorithm is proposed to find a stable rational function, which is frequently used in the linear system theory, by curve-fitting a given data. This problem is essentially a nonolinear optimization problem. In order to converge faster to the solution, the following method is used. First, the coefficients of the denominator polynomial are fixed and only the coefficients of the numerator polynomial are adjusted by its linear relationships. Then the coefficients of the numerator are fixed and the coefficients of the denominator polynomial are adjusted by nonlinear programming. This whole process is repeated until a convergent solution is found. The solution obtained by this method converges better than by other algorithms and its versatility is demonstrated by applying it to the design of a feedback control system and a low pass filter.

• 융합신호처리학회논문지
• /
• 제12권3호
• /
• pp.163-168
• /
• 2011

본 논문은 감마보정을 위한 비선형 곡선 알고리즘의 개선에 관한 연구이다. 기존의 비선형 감마 곡선 생성 방법은 Gauss-Jordan 역행렬을 적용한 최소 자승 다항식(Least Square Polynomial)을 사용하였다. 이 방법은 다항식 계수 값 계산 과정 중 고차행렬의 역행렬 연산에서 $10^{-11}$ 이하의 매우 작은 값은 절단함으로써 곡선접합의 정밀도가 감소된다. 또한 입력으로 사용되는 샘플 포인트가 10-bit 기준으로 0~1023의 밝기 값에 대하여 고루 분포되어있는 경우에만 정확한 동작이 가능하다. 본 논문은 이러한 기존 알고리즘의 단점을 보완하기 위하여, 고차 다항식의 계수 값을 반데몬드 행렬(Vandemond Matrix)에 SVD분해(Singular Value Decomposition)와 QR분해법(QR Decomposition)을 적용하여 행렬의 고유치와 직교성분만으로 연산하였다 또한, 입력 데이터의 구간을 분할하여 각 구간의 다항식을 생성하고, 새롭게 생성된 다항식을 이용하여 곡선 접합을 수행하도록 하였다. 입력 데이터와 곡선 접합결과의 평균제곱오차(Mean Square Error: MSE)와 표준편차(Standard Deviation: STD)를 통한 오차율 비교 결과 최하위 비트(Least Significant Bit: LSB) 에러 범위에서 MSE가 약 $10^{-9}$ 이고 STD는 약 $10^{-5}$로 정밀도가 향상되었다.

• Communications for Statistical Applications and Methods
• /
• 제4권1호
• /
• pp.177-183
• /
• 1997

A data-adaptive order selection procedure is proposed for local polynomial nonparametric regression. For each given polynomial order, bias and variance are estimated and the adaptive polynomial order that has the smallest estimated mean squared error is selected locally at each location point. To estimate mean squared error, empirical bias estimate of Ruppert (1995) and local polynomial variance estimate of Ruppert, Wand, Wand, Holst and Hossjer (1995) are used. Since the proposed method does not require fitting polynomial model of order higher than the model order, it is simpler than the order selection method proposed by Fan and Gijbels (1995b).

• Communications for Statistical Applications and Methods
• /
• 제2권1호
• /
• pp.1-12
• /
• 1995

An estimator of coefficients of polynomial measurement error model with vector predictor and first-order interaction terms is derived using Hermite polynomial. Asymptotic normality of estimator is provided and some simulation study is performed to compare the small sample properties of derived estimator with those of OLS estimator.