• 접착 및 계면
• /
• 제11권4호
• /
• pp.174-180
• /
• 2010

다중벽탄소나노튜브를 표면처리하여 polymethylmethacrylate (PMMA) 기재에 첨가하여 제조한 고분자 복합재료에서 탄소나노튜브의 표면처리가 계면 및 열전도도에 미치는 효과를 고찰하였다. Coagulation 방법과 atomic transfer radical polymerization (ATRP) 방법을 사용하여 탄소나노튜브를 표면 처리 하여 사용하였으며, ATRP 방법을 적용하여 제조한 복합재료는 coagulation 방법을 사용하여 제조한 복합재료보다 높은 열전도도와 투과도를 가졌다. 순수 PMMA의 열전도도가 0.21 W/mK인데 비하여 ATRP 방법으로 처리한 1 wt%의 탄소나노튜브를 첨가하였을 경우 0.38 W/mK로 열전도도가 향상되었다. 탄소나노튜브와 PMMA기재의 계면을 주사전자현미경을 이용하여 관찰한 결과 탄소나노튜브의 표면처리에 의해 기재 내에 분산이 향상되고 고분자기재-탄소나노튜브 계면에서의 접촉이 용이해져 포논산란이 감소되어 광 투과성을 가지면서 열전도도가 향상된 것으로 보인다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.589-592
• /
• 2005

Molding shrinkage s variation is one of the problems to be solved in conventional injection molding. Despite many trying-out has been to solve these, intrinsic causes of shrinkage such as orientation and thermal exchange between melt and mold has yet not solved. For reducing shrinkage and residual stress on molding, injection compression molding process was invented. In this study, experiments about effect of injection compression molding's parameters on shrinkage of molding were conducted with PMMA and compared with conventional injection molding's shrinkage. Before the injection compression molding experiment, molding shrinkage rate was predicted by analyzing pvT graph and was compared with the results of experiment. The shrinkage rate of injection compression molding was lower than convention injection molding' one but was different from the predicted shrinkage. The reason was observed that experiment mold as not positive type, flowing backward of melt into nozzle and unreasonable mechanism of injection molding machine.

• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.207-216
• /
• 2020

목적: 최근 치과에 도입된 polyetherketoneketone (PEKK)의 연마 특성이 Candida albicans의 부착에 미치는 영향을 기존 의치상재료인 polymethylmethacrylate (PMMA)와 비교하고자 하였다. 재료 및 방법: PEKK(그룹 E)와 PMMA(그룹 M)를 사용하여 직경 8 mm, 두께 2 mm인 원판 형태 시편을 제작한 후 연마 정도에 따라 각각 2개 그룹으로 세분하였다(ER, MR: rough; EP, MP: polished, 각 그룹당 시편 12개). 연마는 SiC 연마지로 시행하였으며, ER과 MR 그룹에서는 600 grit SiC 연마지만으로, EP와 MP 그룹에서는 600, 800, 1,000, 1,200 grit SiC 연마지로 단계적으로 연마하였다. 표면의 평균 거칠기는 원자력간 현미경(AFM)을 사용하여 Sa값을 측정하였고 주사전자 현미경으로 1,000배와 20,000배 확대하여 표면을 관찰하였다. 24-well 세포배양 용기에 연마된 시편 및 C. albicans 현탁액을 넣고 37℃에서 2시간 동안 배양하여 C. albicans의 부착을 유도하였으며, 부착된 진균을 피펫팅을 통해 분리하고 현탁액을 10 배씩 단계적으로 10³ 배까지 희석한 후, Sabouraud dextrose 고체배지에 스프레더를 이용하여 접종하였다. 48시간 후 각 고체배지에 형성된 집락의 개수(CFU/plate)를 세어 기록하였다. 측정된 값들의 통계적 차이를 확인하기 위해 one-way ANOVA와 Tukey HSD test를 수행하고 유의수준을 0.05로 정하였다. 결과: 평균 Sa 값은 MR 그룹이 다른 그룹에 비해 유의하게 더 높게 나타나 단계적 연마지 연마법은 PMMA 시편에서만 유의한 효과가 있었음을 확인할 수 있었다 (P < .05). MP 그룹과 EP 그룹간에 Sa 값은 유의한 차이가 없었다. 주사전자현미경 관찰결과 PEKK 시편들의 표면에서 다수의 보풀 같은 돌기가 형성되어 있는 것을 볼 수 있었고 EP 그룹에서 더 심해진 것을 관찰할 수 있었다. CFU/plate의 평균값은 EP 그룹에서 가장 높게 나왔으며 가장 낮은 MP 그룹과 유의한 차이를 보였다 (P < .05). 결론: PMMA와 비교하여 PEKK에서는 단계적 연마지를 이용한 연마를 시행 시 C. albicans의 부착 증가로 이어질 수 있으며, 임상에서도 이러한 점에 대한 신중한 고려가 필요할 것으로 사료된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.146-149
• /
• 2002

It is reported that the mechanical properties of vertebral trabecular bone depend on the density and the mass of bones. Osteoporosis is a systemic skeletal disease caused by low bone mass and microstructure deterioration of trabecular bone. Silva and Gibson (1997) studied the treatment of age-related bone loss using drug therapy. Vertebroplasty is a minimally invasive surgery for the treatment of osteoporosis vertebrae. This procedure includes puncturing vertebrae and filling with Polymethylmethacrylate (PMMA). However, the relative effect of drug therapy and bone cement for osteoporosis treatment is not reported yet. In this study, several 2D models of human vertebral trabecular bone are analyzed by finite element method. The mechanical behaviors of the vertebral trabecular bone treated by the drug therapy and the bone cement are compared. This study shows that bone cement treatment is more effective strategy than drug therapy to prevent the degradation of bone strength.

• 소성∙가공
• /
• 제15권1호
• /
• pp.34-41
• /
• 2006

Microlens arrays were fabricated by a modified LIGA process composed of the exposure of a PMMA (Polymethylmethacrylate) sheet to deep x-rays and subsequent thermal treatment. A successful modeling and analyses for microlens formation were presented according to the experimental procedure. A nickel mold insert was fabricated by the nickel electroforming process on the PMMA microlens arrays fabricated by the modified LIGA process. For the replication of microlens arrays having various diameters with different foci on the same substrate, both hot embossing and microinjection molding processes have been successfully utilized with the fabricated mold insert. Replicated microlenses showed very good surface roughness with the order of 1 nm. The focal lengths of the injection molded microlenses were successfully estimated theoretically and also measured experimentally.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.159-164
• /
• 2005

The Hot Embossing Lithography(HEL) as a method fur the fabrication of the nanostructure with polymer is becoming increasingly important because of its simple process, low cost, high replication fidelity and relatively high throughput. In this paper, we carried out experimental studies and numerical simulations in order to understand the viscous flow of the polymer (PMMA) film during the hot embossing process. To grasp the characteristics of the micro patterning rheology by process parameters (embossing temperature, pressure and time), we have carried out various experiments by using the nickel-coated master fabricated by the deep RIE process and the plasma sputtering. During the hot embossing process, we have observed the characteristics of the viscoelastic behavior of polymer. Also, the viscous flow during the hot embossing process has been simulated by the continuum based FDM(Finite Difference Method) analysis considering the micro effect, such as a surface tension and a contact angle.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.23-28
• /
• 2005

Microlens arrays were fabricated using a modified LIGA process based on the exposure of a PMMA (Polymethylmethacrylate) sheet to deep x-rays and subsequent thermal treatment. A successful modeling and analyses for microlens formation were presented according to the experimental procedure. A nickel mold insert was fabricated by the nickel electroforming process on the PMMA microlens arrays fabricated by the modified LIGA process. For the replication of microlens arrays having various diameters with different foci on the same substrate, the hot embossing and the microinjection molding processes have been successfully utilized with the fabricated mold insert. Fabricated microlenses showed good surface roughness than the mold insert. The focal lengths of the injection molded microlenses were successfully measured experimentally and also estimated theoretically.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.240-243
• /
• 2005

Osteoporosis, one of the age-related disease causes vertebra body fracture due to weakening trabecular bone and makes a substantial effect on load sharing among vertebras. Recently, vertebroplasty is one of the most popular treatment, as augmenting PMMA into vertebra. Biomechanical studies about vertebroplasty have been evaluated by several experiments or analysis under static loading but there has been no study on response under dynamic loading. This study included the FE analysis of patients who treated vertebroplasty under dynamic loading. For this study, 3-D FE model of lumbar spine(L1-L2) was modeled from CT scanning data and compared with experimental results in vitro in order to validate this model. Biomechanical behavior about each of normal person, osteoporotic patient and patient treated vertebroplasty for quantitative evaluations of vertebroplasty was compared and investigated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.877-880
• /
• 2008

In this article, in order to fabricate polymer based electrospray device with super hydrophobic nozzle we use PTFE(polyfluorotetraethylene) plate and PMMA(polymethylmethacrylate). To obtain the super hydrophobic surface nozzle, PTFE surface is treated by argon and oxygen plasma treatment process. And evaluate the treated surface, perform measuring contact angle, SEM(Scanning Electron Microscope) and AFM(Atomic Force Microscope). We compare the performance of the super hydrophobic PTFE surface nozzle with raw PTFE and PMMA surface nozzle. For the ion beam treated PTFE nozzle, the liquid doesn't overflow and it keeps initial position and meniscus shape. From these results, we expect in cease of superhydrophobic surface nozzle jetting becomes more stable and repeatable.

• 대한화장품학회지
• /
• 제30권2호
• /
• pp.207-210
• /
• 2004

유용성 감초산은 강한 항염 작용으로 주름개선용 기능성 화장품에서 널리 사용되어지는 물질이다. 그러나 용해성이 좋지 않고 빛, 열, 산소에 의하여 변질되기 쉽다. 본 연구에서는 유용성감초산을 PG/hydrogenated lecithin/MCT/glycerine/water를 microfluidzer를 이용해 30-50nm인 nanosolve-licorice를 만들고, 잘 용해된 nanosolve-licorice를 다공성 PMMA에 에탄올과 함께 넣은 후 microfluidzer를 1000 BAR에서 연속 3회 처리하여 안정화시켰다. 이 실험에서 글라블리딘 함량을 HPLC로 측정한 결과 기존의 리포좀에 비하여 3-5배 정도 안정성을 보였으며, PMMA 캡슐로 된 리코러스는 피부의 침투가 기존 리포솜에 비하여 월등히 우수하여 항염 효과를 더욱 증가시켰다. 이러한 실험을 image analyzer, particle size analyzer, FF-TEM, chromameter, HPLC등의 분석장비를 사용하였다.