• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1603-1606
• /
• 2009

A new 1D oxalato bridged compound Ni(en)(ox)-2$H_2$O, (ox = oxalate; en = ethylenediamine) has been hydrothermally synthesized and characterized by single crystal X-ray diffraction, IR spectrum, TG analysis, and magnetic measurements. In the structure the Ni atoms are coordinated with four oxygen atoms in two oxalate ions and two nitrogen atoms in one ethylenediamine molecule. The oxalate anion acts as a bis-bidentate ligand bridging Ni atoms in cis-configuration. This completes the infinite zigzag neutral chain, [Ni(en)(ox)]. The interchain space is filled by water molecules that link the chains through a network of hydrogen bonds. Thermal variance of the magnetic susceptibility shows a broad maximum around 50 K characteristic of one-dimensional antiferromagnetic coupling. The theoretical fit of the data for T > 20 K led to the nearest neighbor spin interaction J = -43 K and g = 2.25. The rapid decrease in susceptibility below 20 K indicate this compound to be a likely Haldane gap candidate material with S = 1.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.715-718
• /
• 2006

Porous hydroxyapatite (HAp) scaffolds have been prepared by using the slurry including HAp and magnesia based on the replication of polymer sponge substrate. The influence of MgO content in slurry on the pore morphology and size, density, porosity, and mechanical strength of porous HAp scaffolds was investigated. The obtained scaffolds with average pore sizes ranging 150 to 300 mm had open, relatively uniform, and interconnected porous structure regardless of MgO content. As the MgO content increased, the pore network frame of scaffolds became to be relatively stronger, even though the pore size was not much changed. The compressive strength of the scaffolds increased rapidly with the increase of MgO content because of increasing the pore wall thickness and density of the scaffolds. As a result, the porosity, density, and compressive strength of the porous HAp scaffolds prepared by the sponge method were significantly affected by the addition of MgO.

• Advances in nano research
• /
• 제12권4호
• /
• pp.375-386
• /
• 2022

Synthesis of acrylate-based dispersion resins involves many parameters including temperature, ingredients concentrations, and rate of adding ingredients. Proper controlling of these parameters results in a uniform nano-size chain of polymer on one side and elimination of hazardous residual monomer on the other side. In this study, we aim to screen the process parameters via Internet of Things (IoT) to ensure that, first, the nano-size polymeric chains are in an acceptable range to acquire high adhesion property and second, the remaining hazardous substance concentration is under the minimum value for safety of public and personnel health. In this regard, a set of experiments is conducted to observe the influences of the process parameters on the size and dispersity of polymer chain and residual monomer concentration. The obtained dataset is further used to train an Adaptive Neural network Fuzzy Inference System (ANFIS) to achieve a model that predicts these two output parameters based on the input parameters. Finally, the ANFIS will return values to the automation system for further decisions on parameter adjustment or halting the process to preserve the health of the personnel and final product consumers as well.

• 임산에너지
• /
• 제23권1호
• /
• pp.45-68
• /
• 2004

The word of lignin is derived from the Latin word 'ligum' meaning wood. Lignin is complex polymer consisting of coniferyl alcohol, sinapyl alcohol and p-coumaryl alcohol unit and has an amorphous, three dimensional network structure which is hard to be hydrolyzed by acid. Lignin is found in the cell wall of plants lignified. The mode of polymerization of these alcohols in the cell wall lead to a heterogeneous branched and cross-linked polymer in which phenyl propane units are linked by carbon-carbon and carbon-oxygen bonds. This polymerization of precursors, p-coumaryl alcohol, coniferyl alcohol and sinapyl alcohol to lignin is formed by enzymic dehydrolyzation. The reaction is initiated by an electron transfer which results in the formation of resonance-stabilized phenoxy radical. The combination of these radicals produces a variety of dimers, trimers and oligomers and so on. Lignin research has been divided into basic and practical application field. The basic studies contains biosynthesis, chemical structure, distribution in the cell wall and reactivity by reductants, oxidants and organic solvents. The application research will be approached the reaction of lignin in various pulp making involving pulp bleaching and its effect on pulp qualities. Lignin also will be studied for the production of fine chemicals, polymer products and the conservation into an energy source like petroleum oil because the amount of lignin produced in pulp making process is more than 51,000,000 tons per year in the world. Both basic and application research must lay emphasis on the development for the utilization of lignin and the pulping process. But these researches can not be completed without understanding lignin structure containing functional groups. Therefore, this paper was focused on the review of lignin formulation which has been studied since 1948 in chronological order. This review was based on monomers, dimers, trimers and tetramers of phenyl propane unit structures which were isolated and identified by different methods from various wood.ious wood.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.429.2-429.2
• /
• 2014

ZnO nanowire is known as synthesizable and good mechanical properties. And, stimuli-responsive polymer is widely used in the application of tunable sensing device. So, we combined these characteristics to make precise tunable sensing devise. In this work, we investigate the dependence of ZnO nanowire alignment and morphology on si substrate using nanosphere template with various conditions via hydrothermal process. Also, pH-temperature dependant tuning ability of nanostructure was studied. The brief experimental scheme is as follow. First, Zno seed layer was coated on a si wafer ($20{\times}20mm$) by spin coater. And then $1.15{\mu}m$ sized close-packed PS nanospheres were formed on a cleaned si substrate by using gas-liquid-solid interfacial self-assembly method. After that, zinc oxide nanowires were synthesized using hydrothermal method. Before the wire growth, to specify the growth site, heat treatment was performed. Finally, NIPAM(N-Isopropylacrylamide) was coated onto as-fabricated nanostructure and irradiated by UV light to form the PNIPAM network. The morphology, structures and optical properties are investigated by FE-SEM(Field Emission Scanning electron Microscopy), XRD(X-ray diffraction), OM(Optical microscopy), and WCA(water contact angle).

• 공업화학
• /
• 제10권6호
• /
• pp.902-906
• /
• 1999

메틸셀루로스를 호스트고분자로 하고 copper(II) percolate를 산화제로 사용하여 기상상태에서 직접중합방법으로 전도성 복합필름을 합성하였다. 필름으로서 우수한 성형성과 기계강도를 갖고 있는 메틸셀루로즈는 PVA와 키토산과는 달리 피롤에 대하여 높은 친화성을 나타내어서 기상중합시 호스트고분자로 적합하였다. 기상중합법으로 합성된 폴리피롤은 복합재료 내에서 전도성네트워크를 형성하여 전도성 복합필름의 전기전도도는 $10^{-1}-10^{-7}S/cm$를 나타내었다. 피롤이 호스트고분자 내에서의 폴리피롤로 중합이 되는 정도를 UV-vis분광계로 확인하였다. 전도성 복합필름의 전기전도도와 기계강도는 산화제의 농도와 합성시간에 크게 의존하였다. TGA분석결과는 호스트고분자 내에 형성된 폴리피롤은 복합재료의 열적 안정성에 영향을 미치지 않는다. 전자현미경 분석결과 폴리피롤이 복합재료 내에 균일하게 침투하여 분산되어 있음을 나타내었다. DMA를 사용하여 폴리피롤과 호스트고분자와의 상용성을 조사하였으며 dynamic mechanical analysis(DMA) 분석결과 복합재료 내에서 폴리피롤의 함량이 증가되면서 상용성이 점진적으로 저하되었다.

• 한국결정학회지
• /
• 제15권2호
• /
• pp.78-82
• /
• 2004

벤젠 존재 하에서, DMF와 에탄올의 혼합 용매에서 zinc(II) nitrate $(Zn(NO_3)_2\;{\cdot}\;6H_2O)$와 $ATP(2-aminoterephthalate,\;H_2N-C_6H_3-1,4-(COO)_2)$의 용매열 반응으로 2차원 배위 고분자 [Zn(ATP) (DMF)] (1)이 얻어졌다 X-ray구조 결정 결과, 2개의 아연 금속과 4개의 ATP 리간드가 paddle-wheel유형의 2차 쌓음 단위들을 형성하고, 이것들은 ATP 리간드에 의해서 연결되어 2차원 4각 망을 이룬다는 것이 밝혀졌다. 아연 금속을 기준으로 각 4각형의 크기는 약$11.1\times11.1\;{\AA}$효이다. 고분자 1을 양질의 결정 상태로 얻기 위해서는 벤젠이 요구되었다.

• Macromolecular Research
• /
• 제17권2호
• /
• pp.110-115
• /
• 2009

The electrical, morphological and rheological properties of melt and dry mixed composites of poly ethylene (PE)/graphite (Gr), polypropylene (PP)/Gr and PP/nickel-coated carbon fiber (NCCF) were investigated as a function of filler type, filler content and processing temperature. The electrical conductivities of dry mixed PP/NCCF composites were increased with decreasing processing temperature. For the melt mixed PP/NCCF composites, the electrical conductivities were higher than those of the melt mixed PE/Gr and PP/Gr composites, which was attributed to the effect of the higher NCCF aspect ratio in allowing the composites to form a more conductive network in the polymer matrix than the graphite does. From the results of morphological studies, the fillers in the dry mixed PP/NCCF composites were more randomly dispersed compared to those in the melt mixed PP/NCCF composites. The increased electrical conductivities of the dry mixed composites were attributed to the more random dispersion of NCCF compared to that of the melt mixed PP/NCCF composites. The complex viscosities of the PP/Gr composites were higher than those of the PP/NCCF composites, which was attributed to the larger diameter of the graphite particles than that of the NCCF. Furthermore, the fiber orientation in the 'along the flow' direction during melt mixing was attributed to the decreased complex viscosities of the melt mixed PP/NCCF composites compared those of the melt mixed PP/Gr composites.

• 멤브레인
• /
• 제15권3호
• /
• pp.198-205
• /
• 2005

방사능 오염도 측정에 사용하기 위한 이중구조 고분자막이 폴리설폰과 세륨활성화된 이트륨실리케이트(CAYS)를 이용하여 제조되었다. 제조된 막은 순수 고밀도 고분자 지지층과 이에 제막된 고분자 용액의 상전환 공정에 의해 고형화된 CAYS 함침 활성층의 이중구조로 구성된다. 제막공정에서 대기방치 공정이 생략되었을 때 CAYS를 포함하는 활성층은 전형적인 비대칭 구조를 지니며, CAYS 입자들이 고분자 구조 사이에 박혀있는 형상을 지닌다. 제막공정에서 대기에 방치하는 시간이 증가할수록 막의 형상은 스폰지 구조를 띠며 CAYS는 고분자 구조로부터 분리되어 막 내부에 셀 같은 공간에 밀집되어 존재함을 보였다. 한편, 두 충 사의 계면형상은 고분자 고형화 과정에서의 상전환 속도와 밀접한 관련되었으며, 대기방치 시간의 증가에 따라 계면의 구분이 뚜렷하게 나타나지 않았다. 방사능 탐지 특성에서 스폰지 구조를 지니는 막의 고분자 구조는 방사성핵종이 통과할 수 없는 밀집된 형상을 지니면서 탐지효율의 감소를 초래하는 것으로 나타났다.

• 폴리머
• /
• 제29권1호
• /
• pp.32-35
• /
• 2005

탄소나노튜브를 오존처리한 후 이를 사용하여 탄소나노튜브/고밀도 폴리에틸렌 전도성 복합재료를 제조하였고, 오존처리된 탄산나노튜브가 positive temperature coefficient(PTC) 세기에 미치는 영향을 조사하였다. 원소분석(EA)과 FT-IR 분석 결과, 오존처리된 탄소나노튜브의 표면에는 O-H, C=O 그리고 C-O와 같은 산소함유 관능기가 증가하는 것을 확인할 수 있었다. 또한, 전도성 복합재료의 온도에 따른 저항성은 디지털 멀티메타를 이용하여 측정하였다. 복합재료의 저항성은 고밀도 폴리에틸렌의 결정 용융 온도에서 증가하였으며, 이는 복합재료의 매트릭스로 사용된 고밀도 폴리에틸렌의 열팽창성에 의한 전도성 네트워크의 파괴때문인 것으로 판단된다. 그리고 탄소나노튜브에 오존처리 시간이 증가할수록 탄소나노튜브/고밀도 폴리에틸렌 복합재료의 PTC 세기는 증가했고, 이는 오존처리에 의한 탄소나노튜브 표면에 산소함유 관능기는 PTC 소자의 최대 비저항 값을 증가시키기 때문인 것으로 판단된다.