• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1891-1896
• /
• 2010

Submicron-sized polymeric colloidal particles can self assemble into 3-dimensional (3D) opal structure which is a useful template for photonic crystal. Narrowly dispersed polymer microspheres can be synthesized by emulsion polymerization in water using water-soluble radical initiator. In this report, we demonstrate a facile and reproducible emulsion polymerization method to prepare various polymeric microspheres within 200 - 400 nm size ranges which can be utilized as colloidal photonic crystal template. By controlling the amount of monomer and surfactant, monodisperse polymer colloids of polystyrene (PS) and acrylates with various sizes were successfully prepared without complicated synthetic procedures. Such polymer colloids self-assembled into 3D opal structure exhibiting bright colors by reflection of visible light. The colloidal particles and the resulting opal structures were rigorously characterized, and the wavelength of the structural color from the colloidal crystal was confirmed to have quantitative relationship with the size of constituting colloidal particles as predicted by Bragg equation. The tunability of the structural color was achieved not only by varying the particle size but also by infiltration of the colloidal crystal with liquids having different refractive indices.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.104-109
• /
• 2003

A microcellular, which combines a rubber with the conventional formulation of styrene/divinylbenzene/sorbitan monooleate/water system, was prepared using high internal phase emulsion (HIPE) polymerization. Although the open microcellular foam with low density from the conventional HIPE polymerization shows highly porous characteristics with fine, regular and isotropic structure, the one having much smaller cell size is desirable for various applications. In this study, a polybutadiene was introduced to reduce the cell size with comparable properties. Major interests were focused on the effects of rubber concentration and agitation speed on the cell sizes and compression properties. Scanning electron microscopy was used to observe the microcellular morphology and compression tests were conducted to evaluate the stress-strain behaviors. It was found that the cell size decreased as rubber concentration increased, reflecting a competition between the higher viscosity of continuous phase and the lower viscosity ratio of dispersed to continuous phases due to the addition of high molecular weight rubber into the oil phase of emulsion. A correlation for the average cell size depending on agitation speed was attempted and the result was quite satisfactory.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 추계 총회 및 학술발표회
• /
• pp.41-44
• /
• 1999

• KSBB Journal
• /
• 제31권4호
• /
• pp.256-262
• /
• 2016

The need for natural cosmetic ingredients has been increasing over the world nowadays. Agarose, a natural polymer from red seaweeds, has high hydrophilic character and a function of scaffolder. As skin moisturizer, agarose is adequate for percutaneous absorption. While, blueberry fruits extract possesses rich procyanidins and anthocyanins which show health benefits, anti-oxidant effect, anti-aging and anti-melanogenesis. Stability, sensory preference, skin trouble of the emulsion formula are important for cosmetic product development. In this study, we manufactured an emulsion formula for skin moisturizers using the two ingredients and tested emulsion stability and skin trouble. Total phenolic contents of the blueberry fruits extract were evaluated as well as tyrosinase inhibitory and collagenase inhibitory activities. $IC_{50}$ values of blueberry fruits extract for anti-tyrosinase and anti-collagenase activities were 168 and $112{\mu}g/mL$, respectively using gallic acid as a control ($64.8{\mu}g/mL$). The stability (pH and viscosity) of the formula containing 2% blueberry fruits extracts and 0.1% agarose was measured at five different temperatures (room temp., $25^{\circ}C$, $55^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$) under the sun light at 2 day intervals for 12 days. There has been little pH change at the different temperatures. According to the sensory evaluation, there was no significant flavor, discoloration and physical changes of the formula at $25-65^{\circ}C$. These results suggest that emulsion formula containing blueberry extract and agarose could be used as a candidate for lotion and essence products.

• 공업화학
• /
• 제9권5호
• /
• pp.758-762
• /
• 1998

유화중합을 이용하여 중량 평균입자크기가 $0.3{\mu}m{\sim}1.5{\mu}m$인 중공 라텍스 입자를 제조함에 있어 평균입자크기와 고형분 함량에 영향을 미치는 반응 인자를 조사하였다. 실험결과 유화제 (SDS)의 농도가 증가함에 따라 친수성 코어 폴리머의 크기가 작아졌으며, 친유성 스티렌 단량체 (styrene monomer)와 개시제 (SPS)의 첨가량이 증가함에 따라 중공입자의 크기가 커졌다. 한편, 친수성 아크릴산의 첨가속도가 증가함에 따라 중공입자의 크기가 작아졌다. 또한, 스틸렌 단량체의 첨가량이 증가함에 따라 에멀젼 폴리머의 고형분 함량이 선형적으로 증가하였다.

• 한국고분자학회지:고분자과학과기술
• /
• 제7권4호
• /
• pp.412-424
• /
• 1996

• 공업화학
• /
• 제9권2호
• /
• pp.300-305
• /
• 1998

세 종류의 모노머로 구성된 삼모노머중합의 동력학을 입자성장이 끝난 interval II 동안 pseudo-homopolymerization (PHP) 방법에 의하여 연구하였다. 삼모노머중합의 Smith-Ewart 확장식과 순간중합조성식을 단일유화중합의 해당식과 유사하게 나타낼 수 있었다. 입자당 평균라디칼수와 순간중합조성을 라텍스입자내의 모노머조성을 변화시킴으로써 입자당 자유라디칼수가 한 개 이하인 계에서 예측하였다. 모델계산의 예로서 Styrene-Methyl methacrylate-Acrylonitrile(SMA)계의 속도상수들을 사용하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.289-289
• /
• 2006

The carboxylated MWNTs were successfully prepared by conventional acid treatment, and their structures were confirmed by FT-IR, Raman and TEM analysis. The water-dispersibility of the surface modified WNTs were good. The COOH-MWNT will show better stability during the emulsion polymerization as compared with Pristine MWNT. In-situ emulsion polymerizations of methyl methacrylate N(MMA) and n-butyl acrylate (BA) were carried out. Aggregate size and dispersion stability of the CNTs in water phase were measured using dynamic light scattering, turbidity, UV-visible spectrophotometer, and electron microscope. In addition, thermo-mechanical properties of MWNT/polymer nanocomposites were investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.400-401
• /
• 2008

전기영동형 전자종이 디스플레이의 새로운 소재로써 $C_{60}$(fullerene)와 같은 나노 입자를 포함하는 새로운 전기영동 입자를 제조하였다. 본 연구에서는 안정제로 poly(vinyl pyrrolidone)(PVP)를 사용하여 fullerene을 포함하는 styrene emulsion을 안정화 한 후 라디칼 중합을 통해 fullerene이 포함된 polystyrene microemulsion particles을 제조 합으로써 입자의 분산안정성을 높이고 전기영동에 따른 입자의 움직임을 최적화하도록 하였다. 이 실험에서는 fullerene의 양에 따라 제조된 입자의 크기와 입자 분포를 관찰하였다. 입자의 크기와 입자 분포는 주사형 전자현미경 (SEM) 을 이용하여 확인하였다. 또한 fullerene-PS 입자의 구조 분석과 특성평가를 위해서 FT-IR를 측정하였고, 입자의 열적 성질을 위해 TGA를 측정하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.159-166
• /
• 2012

We have introduced the Pickering emulsion systems to generate novel confining geometries for the selforganization of monodisperse polymer microspheres using nanoparticle-stabilized emulsion droplets encapsulating the building block particles. Then, through the slow evaporation of emulsion phases by heating, these microspheres were packed into regular polyhedral colloidal clusters covered with nanoparticle-stabilizers made of silica. Furthermore, polymer composite colloidal clusters were burnt out leaving nonspherical hollow micro-particles, in which the configurations of the cluster structure were preserved during calcination. The selfassembled porous architectures in this study will be potentially useful in various applications such as novel building block particles or supporting materials for catalysis or gas adsorption.