• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.536-542
• /
• 1996

Water-based acrylic sizing agent(GSW-7000) was prepared by emulsion copolymerization for sizing polyester yarns. Ammonium salt version of the acrylic sizing agent offered greater abrasion resistance to weaving forces and water resistance for water jet loom. GSW-7000 exhibited proper viscosity for sizing, high penetration ability and excellent adhesion to polyester yarn. It was possible to reduce the size pick-up to 70~80% of ordinary solvent-based sizing agent due to excellent adhesive strength of GSW-7000.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.679-690
• /
• 1996

Acrylic copolymer was synthesized from 2-dimethylaminoethyl methacrylate and alkylmethacrylate containing long chain hydrocarbon group. To facilitate emulsification in water, acrylic copolymer was treated with acetic acid, and therefore acetated acrylic copolymer was produced. Acetated acrylic copolymer was perfectly emulsified in water and showed increased emulsion stability. Polymer as a cement dispersion agent(PDCM-PSD) was prepared by blending the newly synthesized acetates acrylic copolymer with sodium gluconate, oleic acid, and triethanolamine. The applicability of the blended polymer was examined, and it was found that the effects of dispersion and water-proof(0.3~0.5) were excellent.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.52-58
• /
• 2006

A novel fabrication of the patterned surfaces in the polymer films was demonstrated by using the self-organizing character of the block copolymers of polystyrene-b-oligothiophenes and polystyrene-b-aromatic amide dendron. Hexagonally arranged open pores with a micrometer-size were spontaneously formed by casting the polymer solutions under a moist air flow. The amphiphilic character of the block copolymers played the crucial role as a surfactant to stabilize the inverse emulsion of water in the organic solvent, and subsequently the aggregated structure of the hydrophilic oligothiophene or aromatic amide dendron segments remained on the interiors of the micropores. The chemical composition on the top of the surface of the microporous films was characterized by energy-filtering transmission electron microscopy (EFTEM) or a time-of-flight secondary ion mass spectrometer (ToF-SIMS). The characterizations clearly indicated that the patterned surfaces in the self-organized block copolymer films with the hexagonally ordered microporous structures were fabricated in a single step.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.702-710
• /
• 2013

Zaltoprofen loaded polyoxalate (POX) microspheres were prepared by an emulsion solvent-evaporation/extraction method like oil-in-water (O/W) for sustained release of zaltoprofen. The influence of several preparation parameters such as fabrication temperature, stirring speed, intensity of the sonication, initial drug ratio, molecular weight ($M_w$) of POX, concentration of POX and concentration of emulsifier has been investigated on the zaltoprofen release profiles. Physicochemical properties and morphology of zaltoprofen loaded POX microspheres were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and Fourier transform infrared (FTIR). Through the analyzed results, it was demonstrated that the characteristics of the microspheres greatly affected by the prepared condition. The releases behavior of zaltoprofen was investigated for 10 days in vitro. It was confirmed that the release behavior of zaltoprofen can be controlled by the manufacturing factor of solvent-evaporation/extraction method.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.485-494
• /
• 2019

This study is to evaluate the effect of admixtures such as blast-furnace slag and fly ash on adhesion in flexure and tension of polymer cement mortar(PCM) using SAE emulsion. The test specimens are prepared with five polymer-cement ratios and five admixture contents, and tested for flexural strength, adhesion in flexure, tensile strength and adhesion in tension. Based on the test results, no improvement of flexural strength and adhesion in flexure caused by admixtures in PCM can be indicated, but the tensile strength and adhesion in tension is improved due to mixing of the admixtures. In particular, the maximum of adhesion in tension of PCM with P/C 20% and BF content of 10% is 3.35MPa which is about 2.36 times higher than that of ordinary cement mortar, and 1.32 times that of PCM that does not contain any admixture. The average ratio of adhesion in tension to tensile strength of PCM was 48.7%. It is apparent that admixture contents of 5% or 10% could be proposed for improvement of tensile strength and adhesion in tension of PCM.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1345-1348
• /
• 2010

Highly monodisperse polystyrene (PS) nanospheres were fabricated by surfactant-free emulsion polymerization in water using styrene, 2,2'-azobis(2-methyl propionamidine) dihydrochloride (AIBA), and poly(vinyl pyrrolidone) (PVP). The size and distribution of the PS nanospheres were systematically investigated in terms of initiator concentration, stabilizer concentration, reaction temperature, reaction time, and reactant concentration. With increasing AIBA initiator concentration, PS particle sizes are raised proportionally, and can be controlled from 120 to 380 nm. Particle sizes were reduced with increasing PVP concentration. This decrease occurs because a high PVP concentration leads to a large number of primary nuclei in the early stage of polymerization. When the reaction temperature increased, the sizes of the PS particles decrease slightly. The particles grew quickly during the initial reaction stage (1-3 h) and the growth rate became steady-state after 6 h. The PS sizes approximately doubled when the reactant (styrene, PVP, azo-initiator) concentrations were increased by a factor of eight.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.408-412
• /
• 2008

The rosiglitazone loaded poly (lactide-co-glycolide) (PLGA) nanoparticles (NPs) were prepared by the emulsion-evaporation method and optimized for particle size and entrapment efficiency. The optimized particles were 140-180 nm in size with narrow size distribution and 80% entrapment efficiency at 1% w/w initial drug loading when prepared with 1-3% w/v of PVA as a surfactant. These particulate carriers exhibited controlled in vitro release of rosiglitazone for 36 hrs at a nearly constant rate after 4 hrs release. In conclusion, these results indicate that PLGA NPs have greater potential for oral delivery of rosiglitazone.

• Macromolecular Research
• /
• v.14 no.2
• /
• pp.194-198
• /
• 2006

Polystyrene, PS, particles of 450 nm diameter and poly(styrene-co-styrene sulfonate), PSS, particles of 140-160 nm diameter were prepared by emulsifier-free emulsion polymerization. The surfaces of the PS and PSS particles were coated with Ag nanoparticles for the application of antimicrobial agents by reduction of Ag ions using ${\gamma}$-irradiation. The Ag-PS and Ag-PSS were characterized by High-Resolution Transmittance Electron Microscopy (HR-TEM), Field-Emission Scanning Electron Microscopy (FE-SEM), and Energy Dispersive X-ray Spectroscopy (EDXS). The HR-TEM and EDXS data showed that the Ag nanoparticles were loaded on the surface of the PS and PSS particles, respectively. The antimicrobial efficiency of the Ag-PS and Ag-PSS particles (0.4 g) with ca. 100 ppm Ag, which was coated onto yam (KS K 0905-1996 rule), was tested against Staphylococcus aureus ATCC 6538 and Klebsiella pneumoniae ATCC 4352 after 100 washing cycles (KS K 0432-1999 rule). The antimicrobial efficiency of the Ag-PS particles against Staphylococcus aureus ATCC 6538 and Klebsiella pneumoniae ATCC 4352 was 99.9% after 100 cycles washing., confirming that the Ag-PS particles can be used as antimicrobial agents.

• Elastomers and Composites
• /
• v.33 no.2
• /
• pp.83-92
• /
• 1998

SBR latex, polyurethane latex and epoxy latex were mixed with polyvinyl acetate emulsion in 0~15% (wt.%). For the mixtures, the viscous properties were examined. The viscosity was influenced by the dispersed phase and the chain structures of polymer, and decreased with the rising of temperatures. The viscosity was increased with mixing of epoxy latex, but decreased with addition of SBR latex or polyurethane latex. Thixotropic index was influenced on the size of micelle and hydrogen bond. The thixotropic index was increased with mixing of epoxy latex or polyurethane latex within 5%, but keep up equality over that. The thixotropic index was decreased with mixing of SBR latex within 5%, but keep up equality over that. The relative viscosity were influenced on the activity of molecule and the interference of dispersed phases, was increased with the rising of temperatures. The relative viscosity was decreased with mixing of epoxy latex, but increased with mixing of SBR latex or polyurethane latex.

• Journal of Dairy Science and Biotechnology
• /
• v.23 no.1
• /
• pp.19-26
• /
• 2005

Nanofood can be simply defined as natural polymer particles containing functional food materials in nanoscale that are synthesized by polymerization or emulsification process. They have very uniform diameters in the range of 1 to 100nm and extensive surface areas due to the small particle size in spite of their non-porosity. Although the technique to produce nanofood has not long developing history, many works have been achieved in various fields. Nanofood has a lot of special advantages, such as functionality, diversity, applicability, etc. In case of the domestic food industries, however, the accumulation of related technique is insufficient against developed countries except used food materials. Also, it is difficult to acquire technical know-how from the developed countries that possess those technologies. We have been studied on preparing functional nanofood and developing new production processes since 1999. Last 5 years we have laid the foundation on the preparation of nanofood and now are focusing on developing new processes of nanofood and expending the field of its applications.